Skip to content
FX8-24

RSF Supply is not an authorized distributor. We sell Preowned Surplus and Refurbished products, all warranties are with RSF Supply and not the manufacturer. Firmware or Software is not included.

Overview

The Brocade FX8-24 is a networking blade designed for the Brocade DCX Backbone family chassis, delivering high-density Fibre Channel and Fibre Channel over IP (FCIP) connectivity. This product is engineered to support a wide range of network demands, offering 12 Fibre Channel ports and 12 FCIP ports. The Fibre Channel ports support multiple port types including E, F, M, EX, and FL, catering to diverse network architectures. For FCIP connectivity, the standard configuration includes 10 1 GbE ports, with the flexibility to integrate up to two optional 10 GbE ports. This allows for scalable network configurations, either maintaining a 10 1 GbE setup or enhancing throughput with the addition of 10 GbE ports to meet higher data transfer demands.
  • Fibre Channel aggregate bandwidth is optimized at 96 Gbps, achieved through twelve 8 Gbps data rate ports.
  • FCIP aggregate bandwidth varies based on configuration, supporting either 10 Gbps or 20 Gbps, ensuring efficient data transfer rates across IP networks.
  • The blade's design ensures minimal latency, operating at 700 ns with no contention, providing fast, cut-through routing at 8 Gbps.
The Brocade FX8-24 is built to support extensive network scalability, capable of integrating with a full fabric architecture that includes up to 239 switches. In terms of fabric domains, it supports a single fabric of up to 56 domains with 7 hops, and a multiprotocol routing fabric of up to 19 hops, making it a suitable option for expansive network environments. FCIP performance is designed to operate at line speeds of 1 Gbps and 10 Gbps, ensuring efficient data transfer across networks. The system's scalability is further enhanced with the capacity to house up to four Brocade FX8-24 blades per Brocade DCX Backbone family chassis, multiplying network capabilities within a compact form factor. With regards to physical dimensions, the Brocade FX8-24 measures 3.6 cm in width, 42.1 cm in height, and 29.9 cm in depth. It occupies a single slot within a Brocade DCX Backbone family chassis, making it a space-efficient networking solution. The system weighs 4.3 kg without SFP/SFP+ modules, and it operates within a power envelope of 250 watts. Operating conditions for the Brocade FX8-24 are designed to accommodate a wide range of environments. It functions optimally between 0°C to 40°C for temperature, with a non-operating range from -25°C to 70°C. Humidity tolerance is set at 10% to 85% non-condensing during operation, and 10% to 90% non-condensing for non-operating conditions. Altitude operation is feasible up to 3,000 meters, with storage capability up to 12 km. In conclusion, the Brocade FX8-24 stands out as a compact, yet powerful blade for the Brocade DCX Backbone family chassis, offering extensive Fibre Channel and FCIP connectivity options. Its design focuses on high performance, scalability, and efficiency, making it an ideal choice for complex networking environments.

Specs

Part Number and Manufacturer Brocade FX8-24
Fibre Channel (FC) Interface Count 12 interfaces supporting E, F, M, EX, and FL configurations
FCIP Interface Count 12 interfaces (VE, VEX): 10 at 1 GbE and 2 optional at 10 GbE
FCIP Standard Interface Setup 10 interfaces at 1 GbE
FCIP Optional 10 GbE Interface Setup 10 interfaces at 1 GbE and one at 10 GbE; or two interfaces at 10 GbE
Expansion Capability Supports up to 239 switches within a single fabric architecture
Maximum Certified Configurations Single fabric: 56 domains, 7 hops; Multiprotocol routing fabric: 19 hops
FCIP Data Rate 1 Gbps standard; up to 10 Gbps maximum
Blade Scalability Maximum of four FX8-24 blades per Brocade DCX Backbone chassis
FC Total Bandwidth 96 Gbps across 12 ports at 8 Gbps each
FCIP Total Bandwidth Options 10 Gbps with 10x1 Gbps; 20 Gbps with 10x1 Gbps + 1x10 Gbps or 2x10 Gbps
Network Latency 700 ns for cut-through routing at 8 Gbps, no contention
Maximum Frame Size 2,112-byte payload capacity
Maximum MTU Size for FCIP 1,500 bytes for Ethernet packets
Supported Service Classes Class 2, Class 3, and Class F (for inter-switch frames)
Physical Dimensions Width: 3.6 cm, Height: 42.1 cm, Depth: 29.9 cm
Installation Requirement One slot in a Brocade DCX Backbone chassis
Unit Weight 4.3 kg without SFP/SFP+ modules
Power Consumption 250 watts maximum
Operational Temperature Range 0°C to 40°C (32°F to 104°F)
Non-operational Temperature Range −25°C to 70°C (−13°F to 158°F)
Humidity Tolerance While Operating 10% to 85%, non-condensing
Humidity Tolerance While Non-operating 10% to 90%, non-condensing
Maximum Operating Altitude Up to 3,000 m (9,842 ft)
Maximum Storage Altitude Up to 12 km (39,370 ft)

FX8-24

by Brocade
Product Line: Brocade FX824
Product Type: Switch
$0.00 - $303.00
$0.00
$0.00 - $303.00
$0.00
Title: Surplus

Orders typically ship within 1-3 Business days, if you need an item to ship sooner please contact us.

Product Description

The FX8-24 Brocade features 12 Fibre Channel ports supporting E, F, M, EX, and FL ports and 12 FCIP ports, including 10 1 GbE ports and up to two 10 GbE ports, facilitating versatile network configurations. It offers a substantial 96 Gbps Fibre Channel aggregate bandwidth and up to 20 Gbps FCIP aggregate bandwidth, ensuring efficient data transfer rates across both standard and optional port configurations. Designed for scalability, the unit can integrate up to four Brocade FX8-24 blades per Brocade DCX Backbone family chassis, supporting a full fabric architecture with a maximum of 239 switches and ensuring optimal performance in high-demand environments.

Key Feature for the FX824 

    

  • What are the available port types on the device?
    
The device supports Fibre Channel ports including E, F, M, EX, and FL types, as well as FCIP ports which include VE and VEX types, with configurations for 10 1 GbE ports and up to two optional 10 GbE ports.
    • 


  • How many Fibre Channel ports does the device have?
    
There are 12 Fibre Channel ports available.
    • 


  • Can the FCIP ports support 10 GbE connections?
    
Yes, the FCIP ports can support two configurations for 10 GbE: one with 10 1 GbE ports and one 10 GbE port, or a configuration with two 10 GbE ports.
    • 


  • What is the maximum fabric architecture scalability?
    
The device can scale to a full fabric architecture with a maximum of 239 switches.
    • 


  • What are the certified maximums for single and multiprotocol routing fabric configurations?
    
For a single fabric, the maximum is 56 domains and 7 hops. For a multiprotocol routing fabric, the maximum is 19 hops.
    • 


  • What is the FCIP performance capability?
    
FCIP performance can reach 1 Gbps line speed for 1 GbE ports and 10 Gbps line speed for 10 GbE ports.
    • 


  • How many Brocade FX8-24 blades can be installed in a Brocade DCX Backbone family chassis?
    
Up to four Brocade FX8-24 blades can be installed per Brocade DCX Backbone family chassis.
    • 


  • What is the aggregate bandwidth for Fibre Channel and FCIP?
    
Fibre Channel aggregate bandwidth is 96 Gbps (12 ports × 8 Gbps), and FCIP aggregate bandwidth can be 10 Gbps or 20 Gbps, depending on the port configuration.
    • 


  • What is the maximum frame and MTU size the device supports?
    
The maximum frame size is a 2,112-byte payload, and the maximum MTU size for Ethernet packets with FCIP is 1,500 bytes.
    • 


  • What are the environmental specifications for operating and non-operating conditions?
    
Operating temperature ranges from 0°C to 40°C (32°F to 104°F), with a non-operating range of −25°C to 70°C (−13°F to 158°F). Humidity ranges from 10% to 85% non-condensing for operating conditions and 10% to 90% non-condensing for non-operating conditions. The operating altitude limit is up to 3,000 m (9,842 ft), and storage altitude goes up to 12 km (39,370 ft).
    •

Product Review

The Brocade FX8-24 excels in providing a high-density Fibre Channel and FCIP connectivity solution, supporting up to 96 Gbps of Fibre Channel aggregate bandwidth and up to 20 Gbps of FCIP aggregate bandwidth, catering to environments requiring high-speed data transfer and maximum throughput. However, its scalability is limited to four blades per Brocade DCX Backbone family chassis, potentially restricting expansion in larger deployments. Additionally, the requirement for optional components to achieve the maximum FCIP bandwidth of 20 Gbps may incur additional costs for organizations looking to leverage the highest available data rates.

Overview

The Brocade FX8-24 is a networking blade designed for the Brocade DCX Backbone family chassis, delivering high-density Fibre Channel and Fibre Channel over IP (FCIP) connectivity. This product is engineered to support a wide range of network demands, offering 12 Fibre Channel ports and 12 FCIP ports. The Fibre Channel ports support multiple port types including E, F, M, EX, and FL, catering to diverse network architectures. For FCIP connectivity, the standard configuration includes 10 1 GbE ports, with the flexibility to integrate up to two optional 10 GbE ports. This allows for scalable network configurations, either maintaining a 10 1 GbE setup or enhancing throughput with the addition of 10 GbE ports to meet higher data transfer demands.
  • Fibre Channel aggregate bandwidth is optimized at 96 Gbps, achieved through twelve 8 Gbps data rate ports.
  • FCIP aggregate bandwidth varies based on configuration, supporting either 10 Gbps or 20 Gbps, ensuring efficient data transfer rates across IP networks.
  • The blade's design ensures minimal latency, operating at 700 ns with no contention, providing fast, cut-through routing at 8 Gbps.
The Brocade FX8-24 is built to support extensive network scalability, capable of integrating with a full fabric architecture that includes up to 239 switches. In terms of fabric domains, it supports a single fabric of up to 56 domains with 7 hops, and a multiprotocol routing fabric of up to 19 hops, making it a suitable option for expansive network environments. FCIP performance is designed to operate at line speeds of 1 Gbps and 10 Gbps, ensuring efficient data transfer across networks. The system's scalability is further enhanced with the capacity to house up to four Brocade FX8-24 blades per Brocade DCX Backbone family chassis, multiplying network capabilities within a compact form factor. With regards to physical dimensions, the Brocade FX8-24 measures 3.6 cm in width, 42.1 cm in height, and 29.9 cm in depth. It occupies a single slot within a Brocade DCX Backbone family chassis, making it a space-efficient networking solution. The system weighs 4.3 kg without SFP/SFP+ modules, and it operates within a power envelope of 250 watts. Operating conditions for the Brocade FX8-24 are designed to accommodate a wide range of environments. It functions optimally between 0°C to 40°C for temperature, with a non-operating range from -25°C to 70°C. Humidity tolerance is set at 10% to 85% non-condensing during operation, and 10% to 90% non-condensing for non-operating conditions. Altitude operation is feasible up to 3,000 meters, with storage capability up to 12 km. In conclusion, the Brocade FX8-24 stands out as a compact, yet powerful blade for the Brocade DCX Backbone family chassis, offering extensive Fibre Channel and FCIP connectivity options. Its design focuses on high performance, scalability, and efficiency, making it an ideal choice for complex networking environments.

Specifications

Part Number and Manufacturer Brocade FX8-24
Fibre Channel (FC) Interface Count 12 interfaces supporting E, F, M, EX, and FL configurations
FCIP Interface Count 12 interfaces (VE, VEX): 10 at 1 GbE and 2 optional at 10 GbE
FCIP Standard Interface Setup 10 interfaces at 1 GbE
FCIP Optional 10 GbE Interface Setup 10 interfaces at 1 GbE and one at 10 GbE; or two interfaces at 10 GbE
Expansion Capability Supports up to 239 switches within a single fabric architecture
Maximum Certified Configurations Single fabric: 56 domains, 7 hops; Multiprotocol routing fabric: 19 hops
FCIP Data Rate 1 Gbps standard; up to 10 Gbps maximum
Blade Scalability Maximum of four FX8-24 blades per Brocade DCX Backbone chassis
FC Total Bandwidth 96 Gbps across 12 ports at 8 Gbps each
FCIP Total Bandwidth Options 10 Gbps with 10x1 Gbps; 20 Gbps with 10x1 Gbps + 1x10 Gbps or 2x10 Gbps
Network Latency 700 ns for cut-through routing at 8 Gbps, no contention
Maximum Frame Size 2,112-byte payload capacity
Maximum MTU Size for FCIP 1,500 bytes for Ethernet packets
Supported Service Classes Class 2, Class 3, and Class F (for inter-switch frames)
Physical Dimensions Width: 3.6 cm, Height: 42.1 cm, Depth: 29.9 cm
Installation Requirement One slot in a Brocade DCX Backbone chassis
Unit Weight 4.3 kg without SFP/SFP+ modules
Power Consumption 250 watts maximum
Operational Temperature Range 0°C to 40°C (32°F to 104°F)
Non-operational Temperature Range −25°C to 70°C (−13°F to 158°F)
Humidity Tolerance While Operating 10% to 85%, non-condensing
Humidity Tolerance While Non-operating 10% to 90%, non-condensing
Maximum Operating Altitude Up to 3,000 m (9,842 ft)
Maximum Storage Altitude Up to 12 km (39,370 ft)

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare