RSF Supply is not an authorized distributor. We sell Preowned Surplus and Refurbished products, all warranties are with RSF Supply and not the manufacturer.
Overview
The Cisco AIR-CAP2702I-A-K9 is a controller-based wireless access point designed to meet the demands of modern wireless networks. This product is equipped with hardware and features that support efficient and reliable wireless connectivity. It operates within the regulatory domain A and is compatible with Cisco Unified Wireless Network Software Release 7.6MR2 or later. The device is designed for indoor use, ensuring optimal performance in office environments, educational institutions, and other indoor facilities.
One of the key specifications of the Cisco AIR-CAP2702I-A-K9 is its support for dual-band operation. It can transmit and receive data over both 2.4 GHz and 5 GHz frequencies, offering flexibility in network setups and reducing interference. This access point utilizes 3 x 4 MIMO technology with three spatial streams, enhancing signal quality and throughput for connected devices. The integrated antennas are precisely engineered for these frequencies, ensuring broad coverage and reliable connectivity.
The physical dimensions of the AIR-CAP2702I-A-K9 are 8.69 inches in width and length, with a height of 1.99 inches, making it compact enough for unobtrusive mounting in various indoor locations. It weighs 2.2 lbs, allowing for easy installation. This device is designed to operate within a temperature range of 0 °C to 40 °C, and it can be stored in temperatures ranging from -30 °C to 70 °C. Humidity tolerance is set between 10% (non-condensing) and 90% (non-condensing), with an operating altitude of up to 9843 ft at 40 °C, ensuring reliability across diverse environmental conditions.
In terms of memory and storage, the AIR-CAP2702I-A-K9 is equipped with 512 MB of DRAM and 64 MB of flash memory, sufficient for running its firmware and storing configurations. The device can be powered through an AC input of 100 to 240 VAC at 50 to 60 Hz or a DC input of 44 to 57 VDC, with a maximum power draw of 15W. This versatility in power options facilitates easy integration into existing power infrastructures.
- Supports Cisco 2500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco 5760 Wireless LAN Controller, Cisco Catalyst 3850 Series Switches, and Cisco Catalyst 3650 Series Switches.
- Features 3 x 4 MIMO technology with three spatial streams for enhanced throughput and signal quality.
- Operates effectively within a wide range of temperatures and humidity levels, ensuring consistent performance in various indoor environments.
Specs
| Item Number | Cisco AIR-CAP2702I-A-K9 |
| Deployment Mode | Controller-Based |
| Operating Frequency Authorization | Domain A |
| Frequency Bands | Two |
| Software Requirement | Requires Cisco Unified Wireless Network Software Release 7.6MR2 or newer |
| Compatible Wireless Controllers | Compatible with Cisco 2500 Series Wireless Controllers, Wireless Controller Module for ISR G2, Cisco 5760 Wireless LAN Controller, and Cisco Catalyst 3850 and 3650 Series Switches |
| Wireless Technology | 3x4 MIMO technology supporting three spatial streams |
| Built-in Antennas | Supports 2.4 GHz and 5 GHz bands |
| Dimensions (Width x Length x Height) | 8.69 x 8.69 x 1.99 inches |
| Product Weight | 2.2 pounds |
| Operational Temperature Range (Low) | 0 degrees Celsius |
| Operational Temperature Range (High) | 40 degrees Celsius |
| Storage Temperature Range (Low) | -30 degrees Celsius |
| Storage Temperature Range (High) | 70 degrees Celsius |
| Operational Humidity Range (Low) | 10% RH (non-condensing) |
| Operational Humidity Range (High) | 90% RH (non-condensing) |
| Maximum Elevation for Operation | 9843 feet at 40 degrees Celsius |
| System RAM | 512 MB |
| System Flash Memory | 64 MB |
| AC Power Requirements | 100 to 240 VAC, 50 to 60 Hz |
| DC Power Requirements | 44 to 57 VDC |
| Power Consumption | 15 Watts |
| Usage Environment | Indoor |
AIR-CAP2702I-A-K9
Original price
$167.00
-
Original price
$737.00
Original price
$167.00
$167.00
-
$737.00
Current price
$167.00
Orders typically ship within 1-3 Business days, if you need an item to ship sooner please contact us.
Product Description
The AIR-CAP2702I-A-K9 is a controller-based access point supporting 3 x 4 MIMO technology with three spatial streams and integrated antennas for 2.4 GHz and 5 GHz bands, designed for indoor use. It operates within a 0 °C to 40 °C temperature range and requires an input power of 100 to 240 VAC or 44 to 57 VDC, with a power draw of 15 W. Compatible with Cisco Unified Wireless Network Software Release 7.6MR2 or later, it supports various Cisco Wireless Controllers and has 512 MB DRAM and 64 MB Flash Memory.Key Feature for the AIR-CAP2702I-A-K9
- What regulatory domain is supported by the controller-based wireless device?
The device supports Regulatory Domain A. - How many bands does the device operate on?
It operates on 2 bands. - Which software release is required for compatibility with the controller-based wireless device?
Cisco Unified Wireless Network Software Release 7.6MR2 or later is required. - Can you list the supported wireless controllers for this device?
Supported controllers include Cisco 2500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco 5760 Wireless LAN Controller, Cisco Catalyst 3850 Series Switches, and Cisco Catalyst 3650 Series Switches. - What technology does the device utilize for signal transmission?
It uses 3 x 4 MIMO with three spatial streams technology. - What are the integrated antenna frequencies?
Integrated antennas operate at 2.4 GHz and 5 GHz. - What are the physical dimensions of the device?
The device measures 8.69 x 8.69 x 1.99 inches. - How much does the device weigh?
It weighs 2.2 lbs. - What is the operating temperature range of the device?
The operating temperature ranges from 0 °C to 40 °C. - What are the power requirements for the device?
The device requires an AC power input of 100 to 240 VAC, 50 to 60 Hz, or a DC power input of 44 to 57 VDC. It has a power draw of 15 W.
Product Review
The Cisco AIR-CAP2702I-A-K9 excels in performance with its 3x4 MIMO technology, supporting high-density environments and providing substantial throughput with three spatial streams. However, its operational temperature range is limited to 0-40 °C, potentially restricting deployment in environments with extreme temperatures. Additionally, compatibility with a range of Cisco Wireless Controllers ensures seamless integration into existing network infrastructures, but the hardware's reliance on older software (starting from Cisco Unified Wireless Network Software Release 7.6MR2) may limit access to newer features and improvements.
Overview
The Cisco AIR-CAP2702I-A-K9 is a controller-based wireless access point designed to meet the demands of modern wireless networks. This product is equipped with hardware and features that support efficient and reliable wireless connectivity. It operates within the regulatory domain A and is compatible with Cisco Unified Wireless Network Software Release 7.6MR2 or later. The device is designed for indoor use, ensuring optimal performance in office environments, educational institutions, and other indoor facilities.
One of the key specifications of the Cisco AIR-CAP2702I-A-K9 is its support for dual-band operation. It can transmit and receive data over both 2.4 GHz and 5 GHz frequencies, offering flexibility in network setups and reducing interference. This access point utilizes 3 x 4 MIMO technology with three spatial streams, enhancing signal quality and throughput for connected devices. The integrated antennas are precisely engineered for these frequencies, ensuring broad coverage and reliable connectivity.
The physical dimensions of the AIR-CAP2702I-A-K9 are 8.69 inches in width and length, with a height of 1.99 inches, making it compact enough for unobtrusive mounting in various indoor locations. It weighs 2.2 lbs, allowing for easy installation. This device is designed to operate within a temperature range of 0 °C to 40 °C, and it can be stored in temperatures ranging from -30 °C to 70 °C. Humidity tolerance is set between 10% (non-condensing) and 90% (non-condensing), with an operating altitude of up to 9843 ft at 40 °C, ensuring reliability across diverse environmental conditions.
In terms of memory and storage, the AIR-CAP2702I-A-K9 is equipped with 512 MB of DRAM and 64 MB of flash memory, sufficient for running its firmware and storing configurations. The device can be powered through an AC input of 100 to 240 VAC at 50 to 60 Hz or a DC input of 44 to 57 VDC, with a maximum power draw of 15W. This versatility in power options facilitates easy integration into existing power infrastructures.
- Supports Cisco 2500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco 5760 Wireless LAN Controller, Cisco Catalyst 3850 Series Switches, and Cisco Catalyst 3650 Series Switches.
- Features 3 x 4 MIMO technology with three spatial streams for enhanced throughput and signal quality.
- Operates effectively within a wide range of temperatures and humidity levels, ensuring consistent performance in various indoor environments.
Specifications
| Item Number | Cisco AIR-CAP2702I-A-K9 |
| Deployment Mode | Controller-Based |
| Operating Frequency Authorization | Domain A |
| Frequency Bands | Two |
| Software Requirement | Requires Cisco Unified Wireless Network Software Release 7.6MR2 or newer |
| Compatible Wireless Controllers | Compatible with Cisco 2500 Series Wireless Controllers, Wireless Controller Module for ISR G2, Cisco 5760 Wireless LAN Controller, and Cisco Catalyst 3850 and 3650 Series Switches |
| Wireless Technology | 3x4 MIMO technology supporting three spatial streams |
| Built-in Antennas | Supports 2.4 GHz and 5 GHz bands |
| Dimensions (Width x Length x Height) | 8.69 x 8.69 x 1.99 inches |
| Product Weight | 2.2 pounds |
| Operational Temperature Range (Low) | 0 degrees Celsius |
| Operational Temperature Range (High) | 40 degrees Celsius |
| Storage Temperature Range (Low) | -30 degrees Celsius |
| Storage Temperature Range (High) | 70 degrees Celsius |
| Operational Humidity Range (Low) | 10% RH (non-condensing) |
| Operational Humidity Range (High) | 90% RH (non-condensing) |
| Maximum Elevation for Operation | 9843 feet at 40 degrees Celsius |
| System RAM | 512 MB |
| System Flash Memory | 64 MB |
| AC Power Requirements | 100 to 240 VAC, 50 to 60 Hz |
| DC Power Requirements | 44 to 57 VDC |
| Power Consumption | 15 Watts |
| Usage Environment | Indoor |