Skip to content
MIC-3D-2XGE-XFP

RSF Supply is not an authorized distributor. We sell Preowned Surplus and Refurbished products, all warranties are with RSF Supply and not the manufacturer. Firmware or Software is not included.

Overview

The Juniper MIC-3D-2XGE-XFP is a high-capacity module designed to enhance the capabilities of networks by providing two 10 Gigabit Ethernet XFP ports. This plug-in module is engineered to meet the demands of high-speed data transfer, offering a significant boost in performance and efficiency for network systems. This module is equipped with two expansion slots that support XFP transceivers, enabling high-performance throughput of up to 10 Gbps on each port. It is capable of operating in both LAN-PHY mode at 10.3125 Gbps and WAN-PHY mode at 9.953 Gbps, offering flexibility in deployment based on network requirements. The MIC-3D-2XGE-XFP supports Maximum Transmission Units (MTUs) of up to 9192 bytes, which helps in optimizing network performance by allowing larger packets of data to be transmitted. The module has a power requirement of 0.6 A at 48 V, translating to a power consumption of 29 W. Its design is compact, with a weight of just 1 lb (0.45 kg), making it an efficient choice for systems where space and power consumption are considerations.
  • Connectivity Technology: Wired
  • Data Transfer Rate: 1Gbps per Port
  • Form Factor: Plug-In Module
Designed for reliability, the Juniper MIC-3D-2XGE-XFP operates within a temperature range of 32° F to 131° F, ensuring stable performance in a wide range of environmental conditions. It can also function in humidity levels from 5% to 90% and at altitudes up to 10,000 ft (3048 m), making it suitable for deployment in various geographical locations. The module's architecture allows for a per slot capacity of 480 Gbps and a system capacity of up to 1.92 Tbps when fully utilized. This high capacity ensures that networks can handle vast amounts of data, catering to the needs of large-scale operations and data centers. The form factor of the MIC-3D-2XGE-XFP is designed to occupy minimal space, with a rack unit size of 5 and the ability to fit up to 9 systems per rack. Each system can accommodate 2 Modular Port Concentrators (MPCs), further enhancing the module's scalability and performance capabilities. In summary, the Juniper MIC-3D-2XGE-XFP module is a powerful and efficient solution for networks requiring high-speed data transfer and extensive data handling capabilities. Its support for high MTUs, along with the flexibility of LAN-PHY and WAN-PHY modes, makes it a versatile addition to any network infrastructure. The module's low power consumption, compact size, and high capacity make it an ideal choice for optimizing network performance while maintaining efficiency and reliability across various operating conditions.

Specs

Item Number MIC-3D-2XGE-XFP
Producer Juniper
Network Interfaces Two 10GbE XFP
Power Consumption 28.8 Watts (0.6 Amps @ 48 Volts)
Mass 0.45 kilograms
Number of Ports 2
Port Performance 10 Gbps full-duplex per port
LAN-PHY Rate 10.3125 Gbps
WAN-PHY Rate 9.953 Gbps
Supported MTUs Up to 9192 bytes
Operating Temperature Low 0°C
Operating Temperature High 55°C
Connection Speed 10 Gbps Ethernet
Compliance 10GBASE-X
Expansion Interface 2 XFP Slots
Port Data Rate 1 Gbps
Connection Type Wired
Module Type Plug-in Module
Unit Size for Rack 5U
Max Units per Rack 9
MPC Slots 2
Bandwidth per Slot 480 Gbps
Total System Bandwidth 1.92 Tbps
Minimum Humidity 5%
Maximum Humidity 90%
Maximum Altitude 3048 meters

MIC-3D-2XGE-XFP

by Juniper
Product Line: Juniper Networks Interface Cards
Product Type: Interface card
$866.00 - $1,200.00
$1,200.00
$866.00 - $1,200.00
$1,200.00
Title: Surplus

Orders typically ship within 1-3 Business days, if you need an item to ship sooner please contact us.

Product Description

The MIC-3D-2XGE-XFP module is equipped with 2x 10 Gigabit Ethernet XFP ports, supporting high-performance throughput of up to 10 Gbps per port with options for both LAN-PHY mode at 10.3125 Gbps and WAN-PHY mode at 9.953 Gbps. This module operates within a temperature range of 32° F to 131° F, and can handle maximum transmission units (MTUs) of up to 9192 bytes, ensuring efficient large data packet transmissions. Designed as a plug-in module, it requires 0.6 A @ 48 V (29 W) of power and weighs 1 lb (0.45 kg), making it a compact yet powerful component for enhancing network capacity and performance.

Key Feature for the MIC3D2XGEXFP 

    

  • What is the power requirement of the hardware?
    
The power requirement is 0.6 A @ 48 V (29 W).
    • 


  • How many network ports does the device with part number 2x 10 Gigabit Ethernet XFP have?
    
It has 2 network ports.
    • 


  • What are the minimum and maximum operating temperatures?
    
The minimum operating temperature is 32° F and the maximum is 131° F.
    • 


  • What is the weight of the 2x 10 Gigabit Ethernet XFP module?
    
The module weighs 1 lb (0.45 kg).
    • 


  • Can you specify the device's LAN-PHY and WAN-PHY mode speeds?
    
In LAN-PHY mode, the speed is 10.3125 Gbps, and in WAN-PHY mode, it is 9.953 Gbps.
    • 


  • What is the maximum transmission unit (MTU) size supported by the 2x 10 Gigabit Ethernet XFP?
    
The maximum MTU size supported is up to 9192 bytes.
    • 


  • What data transfer rate does each port support?
    
Each port supports a data transfer rate of 1Gbps.
    • 


  • How does the 2x 10 Gigabit Ethernet XFP module connect to a network?
    
It uses wired connectivity technology.
    • 


  • What is the maximum operating humidity level for the device?
    
The maximum operating humidity level is 90%.
    • 


  • At what altitude is the 2x 10 Gigabit Ethernet XFP designed to operate?
    
It is designed to operate at an altitude of up to 10,000 ft (3048 m).
    •

Product Review

The Juniper MIC-3D-2XGE-XFP module offers high-speed connectivity with two 10 Gigabit Ethernet XFP ports, ensuring efficient data transfer rates up to 10 Gbps. However, its power consumption of 29W might be a concern for energy-conscious deployments. Additionally, the module's support for both LAN-PHY and WAN-PHY modes, along with its capability to handle MTUs up to 9192 bytes, makes it versatile for various networking needs, though its relatively high operating temperature range could limit its use in environments without adequate cooling.

Overview

The Juniper MIC-3D-2XGE-XFP is a high-capacity module designed to enhance the capabilities of networks by providing two 10 Gigabit Ethernet XFP ports. This plug-in module is engineered to meet the demands of high-speed data transfer, offering a significant boost in performance and efficiency for network systems. This module is equipped with two expansion slots that support XFP transceivers, enabling high-performance throughput of up to 10 Gbps on each port. It is capable of operating in both LAN-PHY mode at 10.3125 Gbps and WAN-PHY mode at 9.953 Gbps, offering flexibility in deployment based on network requirements. The MIC-3D-2XGE-XFP supports Maximum Transmission Units (MTUs) of up to 9192 bytes, which helps in optimizing network performance by allowing larger packets of data to be transmitted. The module has a power requirement of 0.6 A at 48 V, translating to a power consumption of 29 W. Its design is compact, with a weight of just 1 lb (0.45 kg), making it an efficient choice for systems where space and power consumption are considerations.
  • Connectivity Technology: Wired
  • Data Transfer Rate: 1Gbps per Port
  • Form Factor: Plug-In Module
Designed for reliability, the Juniper MIC-3D-2XGE-XFP operates within a temperature range of 32° F to 131° F, ensuring stable performance in a wide range of environmental conditions. It can also function in humidity levels from 5% to 90% and at altitudes up to 10,000 ft (3048 m), making it suitable for deployment in various geographical locations. The module's architecture allows for a per slot capacity of 480 Gbps and a system capacity of up to 1.92 Tbps when fully utilized. This high capacity ensures that networks can handle vast amounts of data, catering to the needs of large-scale operations and data centers. The form factor of the MIC-3D-2XGE-XFP is designed to occupy minimal space, with a rack unit size of 5 and the ability to fit up to 9 systems per rack. Each system can accommodate 2 Modular Port Concentrators (MPCs), further enhancing the module's scalability and performance capabilities. In summary, the Juniper MIC-3D-2XGE-XFP module is a powerful and efficient solution for networks requiring high-speed data transfer and extensive data handling capabilities. Its support for high MTUs, along with the flexibility of LAN-PHY and WAN-PHY modes, makes it a versatile addition to any network infrastructure. The module's low power consumption, compact size, and high capacity make it an ideal choice for optimizing network performance while maintaining efficiency and reliability across various operating conditions.

Specifications

Item Number MIC-3D-2XGE-XFP
Producer Juniper
Network Interfaces Two 10GbE XFP
Power Consumption 28.8 Watts (0.6 Amps @ 48 Volts)
Mass 0.45 kilograms
Number of Ports 2
Port Performance 10 Gbps full-duplex per port
LAN-PHY Rate 10.3125 Gbps
WAN-PHY Rate 9.953 Gbps
Supported MTUs Up to 9192 bytes
Operating Temperature Low 0°C
Operating Temperature High 55°C
Connection Speed 10 Gbps Ethernet
Compliance 10GBASE-X
Expansion Interface 2 XFP Slots
Port Data Rate 1 Gbps
Connection Type Wired
Module Type Plug-in Module
Unit Size for Rack 5U
Max Units per Rack 9
MPC Slots 2
Bandwidth per Slot 480 Gbps
Total System Bandwidth 1.92 Tbps
Minimum Humidity 5%
Maximum Humidity 90%
Maximum Altitude 3048 meters

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare