Skip to content
PC-1XGE-TYPE3-XFP-IQ2-E

RSF Supply is not an authorized distributor. We sell Preowned Surplus and Refurbished products, all warranties are with RSF Supply and not the manufacturer. Firmware or Software is not included.

Overview

The Juniper PC-1XGE-TYPE3-XFP-IQ2-E is a high-capacity network interface card designed to deliver exceptional performance for demanding network environments. It features one 10-Gigabit Ethernet port that supports both WAN-PHY mode at 9.953 Gbps and LAN-PHY mode at 10.3125 Gbps, ensuring versatile connectivity for wide area networks and local area networks respectively. This card operates in full-duplex mode, allowing for simultaneous transmission and reception of data, which enhances its efficiency and throughput capabilities. Power efficiency is a critical aspect of this module, with a power requirement of only 1.2 A at 48 V, translating to a consumption of 56 W. This makes it an energy-efficient choice for enterprises looking to optimize their operational costs without compromising on performance. The device is equipped to handle large maximum transmission units (MTUs) of up to 9192 bytes. This capability is crucial for optimizing network performance by reducing the number of packets needed for large data transfers, thus minimizing overhead and enhancing throughput. At the heart of its connectivity options are the fiber-optic 10-Gigabit small form-factor pluggable (XFP) transceivers, which use a duplex LC/PC connector for both receiving and transmitting data. The module supports a variety of 10-Gigabit Ethernet XFP transceivers, including: - 10GBASE-S (model number: XFP-10G-S) - 10GBASE-L (model number: XFP-10G-L-OC192-SR1) - 10GBASE-E (model number: XFP-10G-E-OC192-IR2) - 10GBASE-Z (model number: XFP-10G-Z-OC192-LR2) This range of transceivers ensures that the card can be tailored to meet the specific needs of various network topologies, distances, and transmission requirements. The Juniper PC-1XGE-TYPE3-XFP-IQ2-E is not just about raw throughput; it also brings advanced networking features to the table, including:
  • 16,000 schedulers for efficient traffic management
  • Flexible Ethernet encapsulation for a wide range of networking scenarios
  • Comprehensive MAC learning, policing, accounting, and filtering capabilities
These features enable precise control over network traffic, ensuring high levels of security, efficiency, and adaptability. The module's physical dimensions, with a height of 1”, width of 4”, and depth of 7”, make it compact enough for easy installation in various network devices. It comes with a single expansion slot of type XFP, which allows for simple upgrades and customization. Additional key functionalities include Virtual Router Redundancy Protocol (VRRP) support for enhanced network reliability and uptime, hierarchical shaping for sophisticated traffic management, and multiple tag protocol identifiers (TPID) support for improved network segmentation and flexibility. In summary, the Juniper PC-1XGE-TYPE3-XFP-IQ2-E is a powerful network interface card that offers high-speed 10-Gigabit Ethernet connectivity, advanced traffic management features, and flexible configuration options. Its support for a wide range of XFP transceivers and large MTUs, combined with its energy-efficient design, make it an excellent choice for enterprises looking to build or upgrade their network infrastructure.

Specs

Item Number Juniper PC-1XGE-TYPE3-XFP-IQ2-E
Producer Juniper
Interface One port for 10-Gigabit Ethernet
Power Usage 56 Watts (1.2 A at 48 V)
Throughput Capacity High
WAN Interface Speed 9.953 Gbps
LAN Interface Speed 10.3125 Gbps
Operation Mode Full-Duplex
Maximum MTU Size Up to 9192 Bytes
Optical Interface Type 10-Gigabit XFP Transceivers with Duplex LC/PC
Supported XFP Models 10GBASE-S (XFP-10G-S), 10GBASE-L (XFP-10G-L-OC192-SR1), 10GBASE-E (XFP-10G-E-OC192-IR2), 10GBASE-Z (XFP-10G-Z-OC192-LR2)
Scheduler Quantity 16,000
Ethernet Features Adaptable encapsulation, MAC dynamics: learning, policing, accounting, filtering
Expansion Slot XFP
Dimensions (H x W x D) 1" x 4" x 7"
Expansion Slot Count 1
Redundancy Protocol Supports Virtual Router Redundancy Protocol (VRRP)
Traffic Management Hierarchical Shaping
Tag Protocol Support Supports Multiple TPIDs

PC-1XGE-TYPE3-XFP-IQ2-E

by Juniper
Product Line: Juniper M-series Series
Product Type: Interface Module
Sold out
$0.00 - $0.00
$0.00
$0.00 - $0.00
$0.00
Title: Surplus

Orders typically ship within 1-3 Business days, if you need an item to ship sooner please contact us.

Product Description

The PC-1XGE-TYPE3-XFP-IQ2-E Juniper module features a one 10-Gigabit Ethernet port with support for both WAN-PHY mode at 9.953 Gbps and LAN-PHY mode at 10.3125 Gbps, ensuring high-performance throughput. It is designed for flexibility with 16,000 schedulers, Virtual Router Redundancy Protocol (VRRP) support, and multiple tag protocol identifiers (TPID) support, alongside a comprehensive suite of MAC functions including learning, policing, accounting, and filtering. The hardware is equipped with fiber-optic 10-Gigabit small form-factor pluggable (XFP) transceivers supporting a range of 10-Gigabit Ethernet XFP transceivers (XFP-10G-S, XFP-10G-L-OC192-SR1, XFP-10G-E-OC192-IR2, XFP-10G-Z-OC192-LR2) and allows for large MTUs of up to 9192 bytes, contained within a physical frame of 1” height, 4” width, and 7” depth.

FAQs for the PC-1XGE-TYPE3-XFP-IQ2-E 

    

  • What is the power requirement for this 10-Gigabit Ethernet port device?
    The device requires 1.2 A at 48 V, totaling 56 W.
    • 

  • How does the device support high-performance throughput?
    It offers high-performance throughput by supporting WAN-PHY mode at 9.953 Gbps and LAN-PHY mode at 10.3125 Gbps, along with full-duplex mode.
    • 

  • What are the MTU capabilities of this device?
    It can handle large MTUs of up to 9192 bytes.
    • 

  • Can you detail the types of 10-Gigabit Ethernet XFP transceivers supported?
    Supported transceivers include 10GBASE-S (XFP-10G-S), 10GBASE-L (XFP-10G-L-OC192-SR1), 10GBASE-E (XFP-10G-E-OC192-IR2), and 10GBASE-Z (XFP-10G-Z-OC192-LR2).
    • 

  • What physical dimensions does this Ethernet port device have?
    It has a height of 1”, a width of 4”, and a depth of 7”.
    • 

  • How many expansion slots does the device feature, and what type are they?
    There is 1 total expansion slot, which is of the XFP type.
    • 

  • What advanced networking features does the device support?
    It supports VRRP, hierarchical shaping, and multiple TPID support.
    • 

  • Describe the MAC features available on this device.
    It offers MAC learning, policing, accounting, and filtering capabilities.
    • 

  • What is the importance of flexible Ethernet encapsulation in this device?
    Flexible Ethernet encapsulation allows for efficient network integration and compatibility with various networking standards.
    • 

  • How many schedulers does this device support, and why is that significant?
    The device supports 16,000 schedulers, enabling advanced network traffic management and prioritization.
    •

Product Review

The Juniper PC-1XGE-TYPE3-XFP-IQ2-E offers high-performance throughput with flexibility in WAN-PHY and LAN-PHY modes, supporting speeds of 9.953 Gbps and 10.3125 Gbps respectively, and accommodates large MTUs up to 9192 bytes, enhancing data transmission efficiency. However, its power requirement of 56W for a single 10-Gigabit Ethernet port might be a consideration for energy-conscious deployments. Additionally, the module's support for a wide range of 10-Gigabit Ethernet XFP transceivers and advanced features like MAC learning and VRRP support make it a versatile choice for complex network environments, despite being limited to a single expansion slot.

Overview

The Juniper PC-1XGE-TYPE3-XFP-IQ2-E is a high-capacity network interface card designed to deliver exceptional performance for demanding network environments. It features one 10-Gigabit Ethernet port that supports both WAN-PHY mode at 9.953 Gbps and LAN-PHY mode at 10.3125 Gbps, ensuring versatile connectivity for wide area networks and local area networks respectively. This card operates in full-duplex mode, allowing for simultaneous transmission and reception of data, which enhances its efficiency and throughput capabilities. Power efficiency is a critical aspect of this module, with a power requirement of only 1.2 A at 48 V, translating to a consumption of 56 W. This makes it an energy-efficient choice for enterprises looking to optimize their operational costs without compromising on performance. The device is equipped to handle large maximum transmission units (MTUs) of up to 9192 bytes. This capability is crucial for optimizing network performance by reducing the number of packets needed for large data transfers, thus minimizing overhead and enhancing throughput. At the heart of its connectivity options are the fiber-optic 10-Gigabit small form-factor pluggable (XFP) transceivers, which use a duplex LC/PC connector for both receiving and transmitting data. The module supports a variety of 10-Gigabit Ethernet XFP transceivers, including: - 10GBASE-S (model number: XFP-10G-S) - 10GBASE-L (model number: XFP-10G-L-OC192-SR1) - 10GBASE-E (model number: XFP-10G-E-OC192-IR2) - 10GBASE-Z (model number: XFP-10G-Z-OC192-LR2) This range of transceivers ensures that the card can be tailored to meet the specific needs of various network topologies, distances, and transmission requirements. The Juniper PC-1XGE-TYPE3-XFP-IQ2-E is not just about raw throughput; it also brings advanced networking features to the table, including:
  • 16,000 schedulers for efficient traffic management
  • Flexible Ethernet encapsulation for a wide range of networking scenarios
  • Comprehensive MAC learning, policing, accounting, and filtering capabilities
These features enable precise control over network traffic, ensuring high levels of security, efficiency, and adaptability. The module's physical dimensions, with a height of 1”, width of 4”, and depth of 7”, make it compact enough for easy installation in various network devices. It comes with a single expansion slot of type XFP, which allows for simple upgrades and customization. Additional key functionalities include Virtual Router Redundancy Protocol (VRRP) support for enhanced network reliability and uptime, hierarchical shaping for sophisticated traffic management, and multiple tag protocol identifiers (TPID) support for improved network segmentation and flexibility. In summary, the Juniper PC-1XGE-TYPE3-XFP-IQ2-E is a powerful network interface card that offers high-speed 10-Gigabit Ethernet connectivity, advanced traffic management features, and flexible configuration options. Its support for a wide range of XFP transceivers and large MTUs, combined with its energy-efficient design, make it an excellent choice for enterprises looking to build or upgrade their network infrastructure.

Specifications

Item Number Juniper PC-1XGE-TYPE3-XFP-IQ2-E
Producer Juniper
Interface One port for 10-Gigabit Ethernet
Power Usage 56 Watts (1.2 A at 48 V)
Throughput Capacity High
WAN Interface Speed 9.953 Gbps
LAN Interface Speed 10.3125 Gbps
Operation Mode Full-Duplex
Maximum MTU Size Up to 9192 Bytes
Optical Interface Type 10-Gigabit XFP Transceivers with Duplex LC/PC
Supported XFP Models 10GBASE-S (XFP-10G-S), 10GBASE-L (XFP-10G-L-OC192-SR1), 10GBASE-E (XFP-10G-E-OC192-IR2), 10GBASE-Z (XFP-10G-Z-OC192-LR2)
Scheduler Quantity 16,000
Ethernet Features Adaptable encapsulation, MAC dynamics: learning, policing, accounting, filtering
Expansion Slot XFP
Dimensions (H x W x D) 1" x 4" x 7"
Expansion Slot Count 1
Redundancy Protocol Supports Virtual Router Redundancy Protocol (VRRP)
Traffic Management Hierarchical Shaping
Tag Protocol Support Supports Multiple TPIDs

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare