Skip to content
15454-OTU2-XP=

RSF Supply is not an authorized distributor. We sell Preowned Surplus and Refurbished products, all warranties are with RSF Supply and not the manufacturer. Firmware or Software is not included.

Overview

The Cisco 15454-OTU2-XP= is a specialized networking hardware component designed for use with the Cisco ONS 15454 Multiservice Transport Platform, catering to the demands of high-capacity, high-performance networks. This module is engineered to enhance the flexibility and scalability of optical transport networks, leveraging DWDM technology for efficient data transmission over fiber optic cables. At its core, the Cisco 15454-OTU2-XP= features four ports that support 10 Gb XFP transceivers, allowing for high-speed data transfer rates essential for modern networking applications. The module is compatible with TCC2P and TCC2 processors and requires system software release 9.0 or later, ensuring seamless integration and optimal performance within the Cisco ONS 15454 ecosystem. This card is designed to occupy a single slot within the transport platform, with compatibility spanning slots 1 to 6 and 12 to 17. This strategic use of space contributes to the system's overall efficiency and capacity. The hardware's operational efficiency is further highlighted by its power consumption metrics, with a typical power draw of 51 W without pluggables and a maximum of 70 W when fully loaded. Key hardware features include: -
  • LED indicators for Failure (FAIL), Active/Standby (ACT/STBY), and Signal Fail (SF), alongside DWDM Port LEDs that signal Active Input and Output Wavelength, providing clear, at-a-glance status updates.
  • A mean time between failures (MTBF) rate of 348,046 hours, indicating a high level of reliability and longevity.
  • Support for G.709 digital wrapper technology, offering various latency modes including Off/NO FEC TXP Mode (10.4 µs), On - Standard FEC TXP (14.2 µs), On - Enhanced FEC TXP (147.6 µs), On - Standard FEC Regenerator Mode (14.2 µs), and On - Enhanced FEC Regenerator Mode (147.6 µs), catering to different network performance and reliability requirements.
Regarding environmental conditions, the module operates within a temperature range of -5 °C to 55 °C and can withstand humidity levels from 5% (non-condensing) to 95% (non-condensing). These specifications ensure reliable performance across various operating environments. Additionally, the card's weight of 2.43 lbs underscores its lightweight yet durable construction. In terms of compatibility, the Cisco 15454-OTU2-XP= is specifically designed for the Cisco ONS 15454 Multiservice Transport Platform, ensuring that users can leverage the full capabilities of this platform, including its advanced DWDM and optical networking features. Overall, the Cisco 15454-OTU2-XP= represents a critical component for network administrators seeking to optimize the performance and reliability of their optical transport networks. With its advanced features, compatibility with high-speed data protocols, and designed within the robust Cisco ecosystem, this module stands out as a key enabler of modern, efficient data communication infrastructures.

Specs

Item Number 15454-OTU2-XP=
Maker Cisco
Ports Available 4
Port Specification 10 Gb XFP
Control Units TCC2P, TCC2
Firmware Version Requirement 9.0 or Newer
Compatible Slot Range 1-6, 12-17
Indicator Lights Fail (FAIL), Active/Standby Mode (ACT/STBY), Signal Failure (SF)
DWDM Signal Indicators Input Signal Presence, Wavelength of Output
Normal Energy Consumption 51 W (Without Modules)
Peak Energy Consumption 70 W (With All Modules)
Space Requirement 1 Slot
Mass 2.43 lbs
Estimated Lifespan 348,046 Hours
Latency without G.709 10.4 µs (TXP Mode without FEC)
Latency with G.709, Standard FEC (TXP Mode) 14.2 µs
Latency with G.709, Enhanced FEC (TXP Mode) 147.6 µs
Latency with G.709, Standard FEC (Regenerator Mode) 14.2 µs
Latency with G.709, Enhanced FEC (Regenerator Mode) 147.6 µs
Operational Temp. Low Limit -5 °C
Operational Temp. High Limit 55 °C
Minimum Humidity for Operation 5% (Non-Condensing)
Maximum Humidity for Operation 95% (Non-Condensing)
Lowest Storage Temp. -5 °C
Highest Storage Temp. 55 °C
Humidity Range for Storage 5% to 95% (Non-Condensing)
Compatible Systems Cisco ONS 15454 Multiservice Transport Platform

15454-OTU2-XP=

by Cisco
Product Line: Cisco Series
Product Type: Multirate DWDM XPonder Card
Sold out
$0.00 - $0.00
$0.00
$0.00 - $0.00
$0.00
Title: Surplus

Orders typically ship within 1-3 Business days, if you need an item to ship sooner please contact us.

Product Description

The 15454-OTU2-XP= Cisco card, designed for the Cisco ONS 15454 Multiservice Transport Platform, supports 4 10 Gb XFP ports and is compatible with system software release 9.0 or later, fitting in slots 1 to 6 and 12 to 17. It operates within a temperature range of -5 °C to 55 °C, with a humidity range of 5% to 95% (non-condensing), and features a mean time between failures (MTBF) of 348,046 hours. The card exhibits a typical power draw of 51 W and a maximum power draw of 70 W when fully loaded, supporting both standard and enhanced Forward Error Correction (FEC) with latencies of 14.2 µs and 147.6 µs respectively.

FAQs for the 15454-OTU2-XP= 

    

  • What port type does the networking hardware support?
    The hardware supports 10 Gb XFP port types.
    • 

  • How many slots does the part occupy in the system?
    It occupies 1 slot.
    • 

  • What is the typical and maximum power draw of the device?
    Typical power draw is 51 W without pluggables, and maximum power draw is 70 W when fully loaded.
    • 

  • Can you detail the compatibility of the card with system slots?
    Compatible with slots 1 to 6 and 12 to 17.
    • 

  • What are the operating temperature limits for the device?
    Operating temperature ranges from -5 °C to 55 °C.
    • 

  • What processor versions are supported by this hardware?
    Supports TCC2P and TCC2 processors.
    • 

  • What is the Mean Time Between Failures (MTBF) for this hardware?
    MTBF is 348,046 hours.
    • 

  • What system software release is required for this hardware?
    Requires system software release 9.0 or later.
    • 

  • What are the latency measurements for G.709 with various FEC modes?
    G.709 Off/NO FEC TXP Mode Latency is 10.4 µs, G.709 On - Standard FEC TXP and Regenerator Mode Latency are both 14.2 µs, and G.709 On - Enhanced FEC TXP and Regenerator Mode Latency are both 147.6 µs.
    • 

  • Is this hardware compatible with the Cisco ONS 15454 Multiservice Transport Platform?
    Yes, it is designed for use with the Cisco ONS 15454 Multiservice Transport Platform.
    •

Product Review

The Cisco 15454-OTU2-XP= module offers four 10 Gb XFP ports, supporting high-speed data transmission within the Cisco ONS 15454 Multiservice Transport Platform, making it suitable for demanding network environments. However, its power consumption ranges from 51W to a maximum of 70W when fully loaded, which could be a consideration for energy-sensitive deployments. Additionally, the module introduces varying latency based on the G.709 FEC mode selected, from 10.4 µs to 147.6 µs, impacting performance based on the operational requirements.

Overview

The Cisco 15454-OTU2-XP= is a specialized networking hardware component designed for use with the Cisco ONS 15454 Multiservice Transport Platform, catering to the demands of high-capacity, high-performance networks. This module is engineered to enhance the flexibility and scalability of optical transport networks, leveraging DWDM technology for efficient data transmission over fiber optic cables. At its core, the Cisco 15454-OTU2-XP= features four ports that support 10 Gb XFP transceivers, allowing for high-speed data transfer rates essential for modern networking applications. The module is compatible with TCC2P and TCC2 processors and requires system software release 9.0 or later, ensuring seamless integration and optimal performance within the Cisco ONS 15454 ecosystem. This card is designed to occupy a single slot within the transport platform, with compatibility spanning slots 1 to 6 and 12 to 17. This strategic use of space contributes to the system's overall efficiency and capacity. The hardware's operational efficiency is further highlighted by its power consumption metrics, with a typical power draw of 51 W without pluggables and a maximum of 70 W when fully loaded. Key hardware features include: -
  • LED indicators for Failure (FAIL), Active/Standby (ACT/STBY), and Signal Fail (SF), alongside DWDM Port LEDs that signal Active Input and Output Wavelength, providing clear, at-a-glance status updates.
  • A mean time between failures (MTBF) rate of 348,046 hours, indicating a high level of reliability and longevity.
  • Support for G.709 digital wrapper technology, offering various latency modes including Off/NO FEC TXP Mode (10.4 µs), On - Standard FEC TXP (14.2 µs), On - Enhanced FEC TXP (147.6 µs), On - Standard FEC Regenerator Mode (14.2 µs), and On - Enhanced FEC Regenerator Mode (147.6 µs), catering to different network performance and reliability requirements.
Regarding environmental conditions, the module operates within a temperature range of -5 °C to 55 °C and can withstand humidity levels from 5% (non-condensing) to 95% (non-condensing). These specifications ensure reliable performance across various operating environments. Additionally, the card's weight of 2.43 lbs underscores its lightweight yet durable construction. In terms of compatibility, the Cisco 15454-OTU2-XP= is specifically designed for the Cisco ONS 15454 Multiservice Transport Platform, ensuring that users can leverage the full capabilities of this platform, including its advanced DWDM and optical networking features. Overall, the Cisco 15454-OTU2-XP= represents a critical component for network administrators seeking to optimize the performance and reliability of their optical transport networks. With its advanced features, compatibility with high-speed data protocols, and designed within the robust Cisco ecosystem, this module stands out as a key enabler of modern, efficient data communication infrastructures.

Specifications

Item Number 15454-OTU2-XP=
Maker Cisco
Ports Available 4
Port Specification 10 Gb XFP
Control Units TCC2P, TCC2
Firmware Version Requirement 9.0 or Newer
Compatible Slot Range 1-6, 12-17
Indicator Lights Fail (FAIL), Active/Standby Mode (ACT/STBY), Signal Failure (SF)
DWDM Signal Indicators Input Signal Presence, Wavelength of Output
Normal Energy Consumption 51 W (Without Modules)
Peak Energy Consumption 70 W (With All Modules)
Space Requirement 1 Slot
Mass 2.43 lbs
Estimated Lifespan 348,046 Hours
Latency without G.709 10.4 µs (TXP Mode without FEC)
Latency with G.709, Standard FEC (TXP Mode) 14.2 µs
Latency with G.709, Enhanced FEC (TXP Mode) 147.6 µs
Latency with G.709, Standard FEC (Regenerator Mode) 14.2 µs
Latency with G.709, Enhanced FEC (Regenerator Mode) 147.6 µs
Operational Temp. Low Limit -5 °C
Operational Temp. High Limit 55 °C
Minimum Humidity for Operation 5% (Non-Condensing)
Maximum Humidity for Operation 95% (Non-Condensing)
Lowest Storage Temp. -5 °C
Highest Storage Temp. 55 °C
Humidity Range for Storage 5% to 95% (Non-Condensing)
Compatible Systems Cisco ONS 15454 Multiservice Transport Platform

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare