Skip to content
76-ES+T+XC-40G

RSF Supply is not an authorized distributor. We sell Preowned Surplus and Refurbished products, all warranties are with RSF Supply and not the manufacturer. Firmware or Software is not included.

Overview

The Cisco 76-ES+T+XC-40G module is designed to enhance the capabilities of Cisco 7600 series routers, offering a mix of 1 Gigabit Ethernet (GE) and 10 Gigabit Ethernet (GE) ports to accommodate a variety of network requirements. This module is compatible with all models in the Cisco 7600 series, with the exception of the Cisco 7603 router, ensuring a wide range of deployment options for network administrators. This product features 22 ports in total, with a combination of port types to support both 1GE and 10GE connections. Specifically, it includes 20 ports dedicated to 1GE and 2 ports designed for 10GE. This configuration allows for flexible connectivity options, catering to both standard and high-speed networking needs. The module is equipped with a Low Queue Type and supports a Distributed Forwarding Card (DFC3CXL), enhancing its performance and efficiency in handling network traffic. Furthermore, it is designed to operate with Cisco IOS version 15.2(2)S or later, ensuring compatibility with the latest software features and security updates. Key hardware specifications include:
  • Power consumption of 427 W, optimizing energy use while maintaining high performance.
  • A forwarding rate of 59.52 million packets per second (Mpps), enabling efficient data transmission across the network.
  • Round-Trip-Time (RTT) Buffer of 200 ms, ensuring smooth and reliable data flow even in high-demand scenarios.
Additionally, the module supports an extensive number of queues per 10GE port, with a maximum of 32K, allowing for sophisticated traffic management and prioritization. This capability is essential for networks that handle a large volume of data and require granular control over packet forwarding. In terms of forwarding capacity, the module excels with over 40 Mpps for Layer 3 or Layer 4 forwarding and up to 125 Mpps for Layer 2 forwarding. This high performance ensures that the network can efficiently process a large amount of data without bottlenecks, maintaining optimal operation even under heavy loads. The boot disk of the module is equipped with 512 MB of storage, providing ample space for the operating system and additional software components. This storage capacity ensures that the module can be updated and maintained with the latest software versions without storage constraints. In summary, the Cisco 76-ES+T+XC-40G module is a powerful addition to the Cisco 7600 series routers, offering a balance of 1GE and 10GE ports along with advanced features for efficient network management and data forwarding. Its compatibility with Cisco IOS 15.2(2)S or later, combined with its high performance and flexibility, makes it an ideal choice for network administrators looking to enhance their network infrastructure.

Specs

Item Number Cisco 76-ES+T+XC-40G
Manufacturer Cisco
Total Ports 22
Port Configuration Combo 1 Gigabit Ethernet and 10 Gigabit Ethernet
1 Gigabit Ethernet Ports Count 20
10 Gigabit Ethernet Ports Count 2
Queue Characteristic Low
Forwarding Processor DFC3CXL
Minimum OS Version Cisco IOS 15.2(2)S or newer
Energy Consumption 427 Watts
Compatible Routers Compatible with all Cisco 7600 series routers, except the Cisco 7603 model
Packets Per Second Forwarding 59.52 Million
Latency Buffer 200 milliseconds
Max Queues per 10GE Port 32,000
Forwarding Rate Layer 3/4 Over 40 Million pps
Forwarding Rate Layer 2 125 Million pps
Storage for Boot Configuration 512 Megabytes

76-ES+T+XC-40G

by Cisco
Product Line: Cisco 7600 Series
Product Type: LAN/WAN PHY Ethernet Services Plus Line Card
Sold out
$0.00 - $0.00
$0.00
$0.00 - $0.00
$0.00
Title: Surplus

Orders typically ship within 1-3 Business days, if you need an item to ship sooner please contact us.

Product Description

The 76-ES+T+XC-40G Cisco module features 22 combo ports supporting both 1GE (20 ports) and 10GE (2 ports), designed for high-speed network environments. It operates with a forwarding rate of 59.52 Mpps, supported by a DFC3CXL distributed forwarding card, and is compatible with all Cisco 7600 series routers, excluding the Cisco 7603. This module requires 427 W of power, supports Cisco IOS 15.2(2)S or later, and is equipped with a 512 MB boot disk, ensuring efficient data processing and network management capabilities.

FAQs for the 76-ES+T+XC-40G 

    

  • What are the total number of ports available?
    
There are 22 ports in total.
    • 


  • Can you detail the port configuration?
    
The device features 20 1GE ports and 2 10GE ports, all supporting combo functionality.
    • 


  • What queue type is used in this device?
    
The queue type is classified as Low.
    • 


  • Is a Distributed Forwarding Card included?
    
Yes, the device comes with a DFC3CXL Distributed Forwarding Card.
    • 


  • What software version is required for operation?
    
Operation requires Cisco IOS version 15.2(2)S or later.
    • 


  • How much power does the device consume?
    
The device consumes 427 W of power.
    • 


  • Is this device compatible with all Cisco 7600 series routers?
    
It is compatible with all Cisco 7600 series routers, except for the Cisco 7603 router.
    • 


  • What is the forwarding rate of this device?
    
The forwarding rate is at 59.52 Mpps.
    • 


  • What is the Round-Trip-Time buffer capacity?
    
The RTT buffer capacity is 200 ms.
    • 


  • How many queues are supported per 10GE port?
    
Each 10GE port supports up to 32K queues.
    •

Product Review

The Cisco 76-ES+T+XC-40G provides versatile connectivity options with its 20 1GE ports and 2 10GE ports, catering to varied network demands. However, its low queue type might limit performance under high traffic conditions, potentially affecting data throughput. It supports a high forwarding rate and extensive Layer 2 and Layer 3 forwarding capabilities, making it suitable for deployment in environments requiring efficient data packet processing.

Overview

The Cisco 76-ES+T+XC-40G module is designed to enhance the capabilities of Cisco 7600 series routers, offering a mix of 1 Gigabit Ethernet (GE) and 10 Gigabit Ethernet (GE) ports to accommodate a variety of network requirements. This module is compatible with all models in the Cisco 7600 series, with the exception of the Cisco 7603 router, ensuring a wide range of deployment options for network administrators. This product features 22 ports in total, with a combination of port types to support both 1GE and 10GE connections. Specifically, it includes 20 ports dedicated to 1GE and 2 ports designed for 10GE. This configuration allows for flexible connectivity options, catering to both standard and high-speed networking needs. The module is equipped with a Low Queue Type and supports a Distributed Forwarding Card (DFC3CXL), enhancing its performance and efficiency in handling network traffic. Furthermore, it is designed to operate with Cisco IOS version 15.2(2)S or later, ensuring compatibility with the latest software features and security updates. Key hardware specifications include:
  • Power consumption of 427 W, optimizing energy use while maintaining high performance.
  • A forwarding rate of 59.52 million packets per second (Mpps), enabling efficient data transmission across the network.
  • Round-Trip-Time (RTT) Buffer of 200 ms, ensuring smooth and reliable data flow even in high-demand scenarios.
Additionally, the module supports an extensive number of queues per 10GE port, with a maximum of 32K, allowing for sophisticated traffic management and prioritization. This capability is essential for networks that handle a large volume of data and require granular control over packet forwarding. In terms of forwarding capacity, the module excels with over 40 Mpps for Layer 3 or Layer 4 forwarding and up to 125 Mpps for Layer 2 forwarding. This high performance ensures that the network can efficiently process a large amount of data without bottlenecks, maintaining optimal operation even under heavy loads. The boot disk of the module is equipped with 512 MB of storage, providing ample space for the operating system and additional software components. This storage capacity ensures that the module can be updated and maintained with the latest software versions without storage constraints. In summary, the Cisco 76-ES+T+XC-40G module is a powerful addition to the Cisco 7600 series routers, offering a balance of 1GE and 10GE ports along with advanced features for efficient network management and data forwarding. Its compatibility with Cisco IOS 15.2(2)S or later, combined with its high performance and flexibility, makes it an ideal choice for network administrators looking to enhance their network infrastructure.

Specifications

Item Number Cisco 76-ES+T+XC-40G
Manufacturer Cisco
Total Ports 22
Port Configuration Combo 1 Gigabit Ethernet and 10 Gigabit Ethernet
1 Gigabit Ethernet Ports Count 20
10 Gigabit Ethernet Ports Count 2
Queue Characteristic Low
Forwarding Processor DFC3CXL
Minimum OS Version Cisco IOS 15.2(2)S or newer
Energy Consumption 427 Watts
Compatible Routers Compatible with all Cisco 7600 series routers, except the Cisco 7603 model
Packets Per Second Forwarding 59.52 Million
Latency Buffer 200 milliseconds
Max Queues per 10GE Port 32,000
Forwarding Rate Layer 3/4 Over 40 Million pps
Forwarding Rate Layer 2 125 Million pps
Storage for Boot Configuration 512 Megabytes

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare