RSF Supply is not an authorized distributor. We sell Preowned Surplus and Refurbished products, all warranties are with RSF Supply and not the manufacturer. Firmware or Software is not included.
Overview
The Cisco AIR-AP2802I-Q-K9 is a controller-based access point designed for indoor use, catering specifically to large enterprise organizations. This device is part of Cisco's commitment to advanced networking hardware, providing reliable wireless connections. It operates within the regulatory domain Q and supports dual-band functionality, capable of operating on both 2.4 GHz and 5 GHz frequencies. This flexibility ensures compatibility with a wide range of devices and network configurations.
Powered by Cisco Unified Wireless Network Software Release 8.2.111.0 or later and Cisco IOS® XE Software Release 16.3, the AIR-AP2802I-Q-K9 is designed to work seamlessly with a variety of Cisco Wireless LAN Controllers. These include the Cisco 2500 Series, Cisco 3500 Series, and the Cisco Wireless Controller Module for ISR G2, among others. This interoperability simplifies network management and enhances the efficiency of wireless network operations.
The hardware specifications highlight the device's capability to support high-density environments:
- 4 x 4 MIMO technology with three spatial streams for improved data throughput and range.
- Integrated antennas with a flexible radio assignment, allowing either 2.4 GHz or 5 GHz operation, along with a dedicated 5 GHz radio.
- Status LED indicators provide immediate feedback on the system's status, including boot loader status, association status, and any warnings or errors.
Physically, the AIR-AP2802I-Q-K9 measures 8.66 x 8.68 x 2.17 inches and weighs 3.53 lbs, making it compact enough for various installation environments without compromising on performance. It operates efficiently within a temperature range of 0 °C to 40 °C and can withstand non-operating temperatures from -30 °C to 70 °C. The device's operational altitude reaches up to 9843 ft at 40 °C, ensuring its reliability in various geographical locations.
Humidity levels are also a consideration in its design, with the device capable of operating in environments with 10% to 90% non-condensing humidity. Internally, it is equipped with 1024 MB of DRAM and 256 MB of flash memory, providing sufficient capacity for firmware updates and configurations.
Power consumption is optimized for efficiency, drawing 22.5 W from the Power Sourcing Equipment (PSE) with all features enabled, excluding the USB 2.0 port. With the USB 2.0 port active, power consumption slightly increases to 26.5 W at the PSE. This attention to power efficiency ensures that the AIR-AP2802I-Q-K9 can deliver optimal performance without excessive energy use.
In summary, the Cisco AIR-AP2802I-Q-K9 is engineered for reliability, performance, and interoperability within Cisco's networking ecosystem. Its specifications make it suitable for deployment in a range of indoor environments, providing robust wireless connectivity for enterprise organizations. This device represents a blend of advanced technology and practical design, making it a valuable component in any modern wireless network.
Specs
| Part Number | AIR-AP2802I-Q-K9 |
| Manufacturer | Cisco |
| Deployment Type | Controller-Based |
| Compliance Domain | Q |
| Frequency Bands | Dual-Band |
| Required Software | Minimum: Cisco Unified Wireless Network Software v8.2.111.0 or Cisco IOS XE v16.3 |
| Compatible Controllers | Cisco 2500, 3500 Series, and Wireless Controller Module for ISR G2 |
| Wireless Technology | 4x4 MIMO with up to Three Spatial Streams |
| Antenna Configuration | Configurable Radio for 2.4 GHz or 5 GHz and a fixed 5 GHz Radio |
| Diagnostic LEDs | Indicators for System Status, Association, Boot, Warning, and Error States |
| Dimensions | 8.66 x 8.68 x 2.17 inches |
| Unit Weight | 3.53 pounds |
| Lowest Operating Temperature | 0°C |
| Highest Operating Temperature | 40°C |
| Operational Ceiling | 9843 ft at 40°C |
| Storage Temperature (Min) | -30°C |
| Storage Temperature (Max) | 70°C |
| Operational Humidity Range | 10 to 90% (non-condensing) |
| Internal Memory | 1 GB DRAM |
| Storage | 256 MB Flash |
| Energy Consumption | 22.5W (20W at device) excluding USB 2.0, 26.5W (23W at device) with USB 2.0 |
| Application Environment | Large-scale Enterprises |
| Placement | Indoor |
AIR-AP2802I-Q-K9
Original price
$0.00
-
Original price
$303.00
Original price
$303.00
$0.00
-
$303.00
Current price
$303.00
Orders typically ship within 1-3 Business days, if you need an item to ship sooner please contact us.
Product Description
The AIR-AP2802I-Q-K9 Cisco is a controller-based access point operating within the Q regulatory domain and supports both 2.4 GHz and 5 GHz bands through its flexible radio configuration and a dedicated 5 GHz radio, employing 4 x 4 MIMO technology with three spatial streams for enhanced coverage and capacity. It is compatible with Cisco Unified Wireless Network Software Release 8.2.111.0 or later and Cisco IOS ® XE Software Release 16.3, and works seamlessly with a range of Cisco Wireless LAN Controllers including the 2500 and 3500 Series. Designed for indoor use within large enterprise environments, this access point features a 1024 MB DRAM and 256 MB flash memory, supports a maximum operating altitude of 9843 ft at 40 °C, and has a power draw of 22.5 W (with USB 2.0 port disabled) to 26.5 W (with USB 2.0 port enabled).Key Feature for the AIR-AP2802I-Q-K9
- What regulatory domain does the controller-based hardware operate in?
The hardware operates in regulatory domain Q. - Can the part support both 2.4 GHz and 5 GHz bands?
Yes, it supports two bands and includes a flexible radio that can operate in either 2.4 GHz or 5 GHz, along with a dedicated 5 GHz radio. - What software versions are required for this hardware to function?
It requires Cisco Unified Wireless Network Software Release 8.2.111.0 or later, and Cisco IOS® XE Software Release 16.3. - Which Wireless LAN Controllers are supported?
Supported controllers include Cisco 2500 Series, Cisco 3500 Series, and Cisco Wireless Controller Module for ISR G2. - What technology does it use for signal transmission?
The hardware uses 4 x 4 MIMO technology with three spatial streams for signal transmission. - How are operating statuses indicated on the device?
Status LED indicators are used for boot loader status, association status, operating status, boot loader warnings, and boot loader errors. - What are the dimensions and weight of the hardware?
The dimensions are 8.66 x 8.68 x 2.17 inches and it weighs 3.53 lbs. - What is the maximum operating altitude?
The maximum operating altitude is 9843 ft at 40 °C. - What memory specifications does the hardware have?
It is equipped with 1024 MB DRAM and 256 MB of flash memory. - How much power does the device draw?
The power draw is 22.5 W at the PSE (20W at the PD) with all features enabled except for the USB 2.0 port, and 26.5 W at the PSE (23W at the PD) with the USB 2.0 port enabled.
Product Review
The Cisco AIR-AP2802I-Q-K9 access point supports advanced technology, including 4x4 MIMO with three spatial streams, enhancing data throughput and wireless coverage for enterprise environments. However, its maximum operating temperature of 40 °C and weight of 3.53 lbs may limit deployment flexibility in varying physical conditions and spaces. It is compatible with a range of Cisco Wireless LAN Controllers, ensuring seamless integration into existing Cisco environments but necessitates consideration of compatibility and additional hardware for optimal performance.
Overview
The Cisco AIR-AP2802I-Q-K9 is a controller-based access point designed for indoor use, catering specifically to large enterprise organizations. This device is part of Cisco's commitment to advanced networking hardware, providing reliable wireless connections. It operates within the regulatory domain Q and supports dual-band functionality, capable of operating on both 2.4 GHz and 5 GHz frequencies. This flexibility ensures compatibility with a wide range of devices and network configurations.
Powered by Cisco Unified Wireless Network Software Release 8.2.111.0 or later and Cisco IOS® XE Software Release 16.3, the AIR-AP2802I-Q-K9 is designed to work seamlessly with a variety of Cisco Wireless LAN Controllers. These include the Cisco 2500 Series, Cisco 3500 Series, and the Cisco Wireless Controller Module for ISR G2, among others. This interoperability simplifies network management and enhances the efficiency of wireless network operations.
The hardware specifications highlight the device's capability to support high-density environments:
- 4 x 4 MIMO technology with three spatial streams for improved data throughput and range.
- Integrated antennas with a flexible radio assignment, allowing either 2.4 GHz or 5 GHz operation, along with a dedicated 5 GHz radio.
- Status LED indicators provide immediate feedback on the system's status, including boot loader status, association status, and any warnings or errors.
Physically, the AIR-AP2802I-Q-K9 measures 8.66 x 8.68 x 2.17 inches and weighs 3.53 lbs, making it compact enough for various installation environments without compromising on performance. It operates efficiently within a temperature range of 0 °C to 40 °C and can withstand non-operating temperatures from -30 °C to 70 °C. The device's operational altitude reaches up to 9843 ft at 40 °C, ensuring its reliability in various geographical locations.
Humidity levels are also a consideration in its design, with the device capable of operating in environments with 10% to 90% non-condensing humidity. Internally, it is equipped with 1024 MB of DRAM and 256 MB of flash memory, providing sufficient capacity for firmware updates and configurations.
Power consumption is optimized for efficiency, drawing 22.5 W from the Power Sourcing Equipment (PSE) with all features enabled, excluding the USB 2.0 port. With the USB 2.0 port active, power consumption slightly increases to 26.5 W at the PSE. This attention to power efficiency ensures that the AIR-AP2802I-Q-K9 can deliver optimal performance without excessive energy use.
In summary, the Cisco AIR-AP2802I-Q-K9 is engineered for reliability, performance, and interoperability within Cisco's networking ecosystem. Its specifications make it suitable for deployment in a range of indoor environments, providing robust wireless connectivity for enterprise organizations. This device represents a blend of advanced technology and practical design, making it a valuable component in any modern wireless network.
Specifications
| Part Number | AIR-AP2802I-Q-K9 |
| Manufacturer | Cisco |
| Deployment Type | Controller-Based |
| Compliance Domain | Q |
| Frequency Bands | Dual-Band |
| Required Software | Minimum: Cisco Unified Wireless Network Software v8.2.111.0 or Cisco IOS XE v16.3 |
| Compatible Controllers | Cisco 2500, 3500 Series, and Wireless Controller Module for ISR G2 |
| Wireless Technology | 4x4 MIMO with up to Three Spatial Streams |
| Antenna Configuration | Configurable Radio for 2.4 GHz or 5 GHz and a fixed 5 GHz Radio |
| Diagnostic LEDs | Indicators for System Status, Association, Boot, Warning, and Error States |
| Dimensions | 8.66 x 8.68 x 2.17 inches |
| Unit Weight | 3.53 pounds |
| Lowest Operating Temperature | 0°C |
| Highest Operating Temperature | 40°C |
| Operational Ceiling | 9843 ft at 40°C |
| Storage Temperature (Min) | -30°C |
| Storage Temperature (Max) | 70°C |
| Operational Humidity Range | 10 to 90% (non-condensing) |
| Internal Memory | 1 GB DRAM |
| Storage | 256 MB Flash |
| Energy Consumption | 22.5W (20W at device) excluding USB 2.0, 26.5W (23W at device) with USB 2.0 |
| Application Environment | Large-scale Enterprises |
| Placement | Indoor |