RSF Supply is not an authorized distributor. We sell Preowned Surplus and Refurbished products, all warranties are with RSF Supply and not the manufacturer. Firmware or Software is not included.
Overview
The Cisco NC55-5508-FC is a high-capacity line card designed for use with the NCS 5500 modular chassis series, offering a blend of performance, scalability, and efficiency for modern networking demands. This product is engineered to meet the rigorous requirements of service providers and enterprises, facilitating the deployment of both dense wavelength division multiplexing (DWDM) infrastructure and packet-based network services.
At the core of the NC55-5508-FC's capabilities is its impressive bandwidth capacity. When fully equipped with 6 fabric cards, the total system bandwidth reaches up to 5.4 terabits per second (Tbps), allowing for the handling of extensive data traffic without bottlenecks. This substantial throughput is supported by a single-stage architecture, ensuring direct line card mating for simplified operations and enhanced performance.
The hardware specifications of the NC55-5508-FC underscore its suitability for a wide range of environmental conditions and deployment scenarios:
- The device boasts a height of 22.70 inches, a width of 17.50 inches, and a depth of 31.76 inches, with a total weight of 150 lbs, making it a substantial piece of equipment designed for rack installation.
- Operating temperature ranges from 0 °C to 40 °C, with the capability to withstand short-term excursions between -5 °C and 55 °C, accommodating various climatic conditions.
- Storage temperature tolerance spans from -40 °C to 70 °C, ensuring the hardware's integrity during non-operational phases.
- Humidity levels are maintained between 5% (non-condensing) and 95% (non-condensing), with an operational altitude limit of up to 9842 feet, allowing for deployment in a broad spectrum of geographical locations.
- The unit is RoHS-6 compliant, reflecting Cisco's commitment to environmental responsibility by restricting the use of certain hazardous substances in the manufacturing process.
Key compliance and safety standards met by the NC55-5508-FC include:
- UL 60950-1 Second Edition
- CAN/CSA-C22.2 No. 60950-1 Second Edition
- IEC 60950-1 Second Edition
Specs
| Part Number and Manufacturer | Cisco NC55-5508-FC |
| Chassis Card Capacity | 6 Cards |
| Total Switching Capacity | 900 Gigabits per second |
| Operating System Compatibility | Compatible with Cisco IOS XR Software Version 6.0+ |
| Physical Height | 22.70 inches |
| Physical Width | 17.50 inches |
| Physical Depth | 31.76 inches |
| Operational Temperature Range Low | 0 Degrees Celsius |
| Operational Temperature Range High | 40 Degrees Celsius |
| Storage Temperature Range Low | -40 Degrees Celsius |
| Storage Temperature Range High | 70 Degrees Celsius |
| Operational Humidity Range Minimum | 5% RH, Non-condensing |
| Operational Humidity Range Maximum | 95% RH, Non-condensing |
| Maximum Altitude for Operation | Up to 9842 feet |
| Unit Weight | 150 pounds |
| Safety Standards Compliance | Meets UL 60950-1, CAN/CSA-C22.2 No. 60950-1, EN 60950-1, IEC 60950-1, AS/NZS 60950-1, GB4943 standards |
| EMC Emissions Compliance | Complies with 47CFR Part 15 Class A, AS/NZS CISPR22 Class A, CISPR22 Class A, EN55022 Class A, ICES003 Class A, VCCI Class A |
| Redundancy Support | N+1 Configuration |
| EMC Immunity Standards | Conforms to EN55024, CISPR24, E300386, KN 61000-4 |
| RoHS Compliance | Meets RoHS-6 requirements |
| System Stages | Single Stage |
| Connection to Line Card | Direct Mating |
| Compatible Systems | Designed for NCS 5500 modular chassis series |
| Short-Term Low Operating Temperature | -5 Degrees Celsius |
| Short-Term High Operating Temperature | 55 Degrees Celsius |
| Enhanced Capacity with 6 Fabric Cards | 5.4 Terabits per second |
NC55-5508-FC
Original price
$0.00
-
Original price
$1,438.00
Original price
$1,438.00
$0.00
-
$1,438.00
Current price
$1,438.00
Orders typically ship within 1-3 Business days, if you need an item to ship sooner please contact us.
Product Description
The NC55-5508-FC is designed for use with the NCS 5500 modular chassis series, supporting up to 6 cards per chassis and delivering a bandwidth of 900 Gbps, with a total system bandwidth of 5.4 Tbps when equipped with 6 fabric cards. It operates within a temperature range of 0 °C to 40 °C and offers redundancy with an N+1 configuration. This model is compatible with Cisco IOS XR Software Release 6.0 and later, adheres to multiple safety standards including UL 60950-1, and meets EMC emissions and immunity requirements, ensuring reliable and compliant operation in diverse environments.Key Feature for the NC55-5508-FC
- What is the total bandwidth that can be achieved with 6 fabric cards installed?
The total bandwidth with 6 fabric cards is 5.4 Tbps. - How many cards can the chassis accommodate?
The chassis can accommodate 6 cards. - What is the minimum operating temperature for this device?
The minimum operating temperature is 0 °C. - What is the weight of the device?
The device weighs 150 lbs. - Is the device RoHS compliant?
Yes, the device is RoHS-6 compliant. - What software version is required for operation?
Cisco IOS XR Software Release 6.0 and later is required for operation. - What is the maximum altitude at which the device can operate?
The device can operate at altitudes up to 9842ft. - What are the safety standards met by this device?
The device meets several safety standards, including UL 60950-1 Second Edition and EN 60950-1 Second Edition. - What type of redundancy does the device support?
The device supports N+1 redundancy. - What type of EMC emissions standards does the device comply with?
The device complies with standards such as 47CFR Part 15 Class A and CISPR22 Class A.
Product Review
The Cisco NC55-5508-FC offers a high bandwidth capacity of up to 5.4 Tbps with 6 fabric cards, catering to demanding network environments. Its compatibility with Cisco IOS XR Software Release 6.0 and later ensures a scalable and flexible network architecture. However, the substantial weight of 150 lbs may pose challenges during installation and requires adequate space and structural support.
Overview
The Cisco NC55-5508-FC is a high-capacity line card designed for use with the NCS 5500 modular chassis series, offering a blend of performance, scalability, and efficiency for modern networking demands. This product is engineered to meet the rigorous requirements of service providers and enterprises, facilitating the deployment of both dense wavelength division multiplexing (DWDM) infrastructure and packet-based network services.
At the core of the NC55-5508-FC's capabilities is its impressive bandwidth capacity. When fully equipped with 6 fabric cards, the total system bandwidth reaches up to 5.4 terabits per second (Tbps), allowing for the handling of extensive data traffic without bottlenecks. This substantial throughput is supported by a single-stage architecture, ensuring direct line card mating for simplified operations and enhanced performance.
The hardware specifications of the NC55-5508-FC underscore its suitability for a wide range of environmental conditions and deployment scenarios:
- The device boasts a height of 22.70 inches, a width of 17.50 inches, and a depth of 31.76 inches, with a total weight of 150 lbs, making it a substantial piece of equipment designed for rack installation.
- Operating temperature ranges from 0 °C to 40 °C, with the capability to withstand short-term excursions between -5 °C and 55 °C, accommodating various climatic conditions.
- Storage temperature tolerance spans from -40 °C to 70 °C, ensuring the hardware's integrity during non-operational phases.
- Humidity levels are maintained between 5% (non-condensing) and 95% (non-condensing), with an operational altitude limit of up to 9842 feet, allowing for deployment in a broad spectrum of geographical locations.
- The unit is RoHS-6 compliant, reflecting Cisco's commitment to environmental responsibility by restricting the use of certain hazardous substances in the manufacturing process.
Key compliance and safety standards met by the NC55-5508-FC include:
- UL 60950-1 Second Edition
- CAN/CSA-C22.2 No. 60950-1 Second Edition
- IEC 60950-1 Second Edition
Specifications
| Part Number and Manufacturer | Cisco NC55-5508-FC |
| Chassis Card Capacity | 6 Cards |
| Total Switching Capacity | 900 Gigabits per second |
| Operating System Compatibility | Compatible with Cisco IOS XR Software Version 6.0+ |
| Physical Height | 22.70 inches |
| Physical Width | 17.50 inches |
| Physical Depth | 31.76 inches |
| Operational Temperature Range Low | 0 Degrees Celsius |
| Operational Temperature Range High | 40 Degrees Celsius |
| Storage Temperature Range Low | -40 Degrees Celsius |
| Storage Temperature Range High | 70 Degrees Celsius |
| Operational Humidity Range Minimum | 5% RH, Non-condensing |
| Operational Humidity Range Maximum | 95% RH, Non-condensing |
| Maximum Altitude for Operation | Up to 9842 feet |
| Unit Weight | 150 pounds |
| Safety Standards Compliance | Meets UL 60950-1, CAN/CSA-C22.2 No. 60950-1, EN 60950-1, IEC 60950-1, AS/NZS 60950-1, GB4943 standards |
| EMC Emissions Compliance | Complies with 47CFR Part 15 Class A, AS/NZS CISPR22 Class A, CISPR22 Class A, EN55022 Class A, ICES003 Class A, VCCI Class A |
| Redundancy Support | N+1 Configuration |
| EMC Immunity Standards | Conforms to EN55024, CISPR24, E300386, KN 61000-4 |
| RoHS Compliance | Meets RoHS-6 requirements |
| System Stages | Single Stage |
| Connection to Line Card | Direct Mating |
| Compatible Systems | Designed for NCS 5500 modular chassis series |
| Short-Term Low Operating Temperature | -5 Degrees Celsius |
| Short-Term High Operating Temperature | 55 Degrees Celsius |
| Enhanced Capacity with 6 Fabric Cards | 5.4 Terabits per second |