RSF Supply is not an authorized distributor. We sell Preowned Surplus and Refurbished products, all warranties are with RSF Supply and not the manufacturer. Firmware or Software is not included.
Overview
The Cisco VS-S2T-10G-XL is a high-capacity network module designed to enhance the scalability and performance of a wide range of Cisco Catalyst switch platforms. It is engineered to support complex, high-demand networks, offering a comprehensive suite of features and capabilities. At its core, the Cisco VS-S2T-10G-XL boasts impressive routing capabilities, with support for up to 1024K IPv4 routes and 512K IPv6 routes, ensuring it can handle extensive network environments efficiently. Its Netflow entries also reach up to 1024K, which facilitates detailed network traffic analysis.
In terms of performance, the module excels with IPv4 routing capabilities of up to 720 million packets per second (Mpps) and IPv6 routing up to 390 Mpps. This high throughput ensures that even in data-intensive scenarios, network efficiency is maintained. Additionally, Layer 2 (L2) bridging also reaches up to 720 Mpps, further underscoring its ability to swiftly process and forward traffic. The Cisco VS-S2T-10G-XL also supports up to 4K VLANs and 16K bridge domains, offering flexibility in network segmentation and enhancing security.
The module's capacity for Virtual Private LAN Service (VPLS) and Generic Routing Encapsulation (GRE) both peak at 390 Mpps, while it also includes hardware-assisted Network Address Translation (NAT) to maintain high performance across diverse network tasks. Its MAC entry capacity stands at 128K, with equal capacity for IPv4 and IPv6 multicast routes, allowing for efficient network resource distribution and management.
For network security and quality of service (QoS), the Cisco VS-S2T-10G-XL provides 256K shared entries for Layer 3 classification, supporting advanced QoS and security policies. It also features an extensive set of rate limiters and Access Control Lists (ACLs), including:
- Aggregate traffic rate limiting policers: 16348
- Layer 2 rate limiters: 20 ingress and 6 egress
- MAC ACLs: per port support
- Security ACL entries: 256K shared for QoS/security
- CPU rate limiters: 57
This allows for granular control over network traffic, ensuring optimal performance and security. The module also supports up to 16K interfaces with unique ACLs and 16 Reverse Path Forwarding (RPF) interfaces, underscoring its extensive filtering and forwarding capabilities.
Key hardware specifications include 4 MB of NVRAM and 1 GB of flash memory, providing sufficient storage for software, configurations, and system logs. The Cisco VS-S2T-10G-XL is compatible with Cisco software version 12.2(50)SY and future releases, ensuring long-term usability and support. It also supports private VLANs, offering additional security and network segmentation options.
In summary, the Cisco VS-S2T-10G-XL is a powerful network module that offers high-speed routing, extensive ACLs, and superior traffic management features suitable for demanding network environments. With its advanced capabilities and compatibility with future software releases, it represents a strategic investment for businesses aiming to bolster their network infrastructure.
Specs
| Part Identifier | Cisco VS-S2T-10G-XL |
| IPv4 Route Capacity | 1,024,000 |
| IPv6 Route Capacity | 512,000 |
| IPv4 Routing Performance | Maximum 720 million packets per second (Mpps) |
| IPv6 Routing Performance | Maximum 390 Mpps |
| Layer 2 Switching Rate | Maximum 720 Mpps |
| VLAN Support | Up to 4,000 |
| Bridge Domain Support | Up to 16,000 |
| VPLS Performance | Maximum 390 Mpps |
| GRE Performance | Maximum 390 Mpps |
| NAT Type | Supported with Hardware Acceleration |
| MAC Address Capacity | 128,000 entries |
| Multicast Route Capacity | 128,000 for both IPv4 and IPv6 |
| Layer 3 Filters for QoS/Security | 256,000 entries shared |
| Aggregate Traffic Policers | 16,348 |
| Layer 2 Traffic Control | 20 ingress/6 egress limiters |
| Per-Port MAC ACL Support | Available |
| Security Filters Capacity | 256,000 entries shared for QoS/Security |
| CPU Traffic Limiters | 57 |
| uRPF Maximum Check | 16 |
| Unique ACL Interface Count | 16,000 |
| RPF Interface Count | 16 |
| Private VLAN Capability | Supported |
| Compatible Software Version | Cisco IOS 12.2(50)SY onwards |
| NVRAM Size | 4 Megabytes |
| Flash Storage Capacity | 1 Gigabyte |
VS-S2T-10G-XL
Original price
$0.00
-
Original price
$2,568.00
Original price
$2,568.00
$0.00
-
$2,568.00
Current price
$2,568.00
Orders typically ship within 1-3 Business days, if you need an item to ship sooner please contact us.
Product Description
The VS-S2T-10G-XL Cisco is equipped with advanced routing and bridging capabilities, supporting up to 1024K IPv4 routes, 512K IPv6 routes, and L2 bridging up to 720 Mpps. It features high-capacity network security and QoS with 256K security ACL entries shared for QoS/security, NAT hardware assistance, and supports private VLANs. This model is designed for scalability and high performance, with 1 GB of flash memory and compatibility with Cisco software version 12.2(50)SY and future releases, ensuring a flexible and future-proof networking solution.Key Feature for the VS-S2T-10G-XL
- What is the maximum number of IPv4 routes supported?
- Routes 1024K (IPv4).
- How many Netflow entries can be supported?
- Netflow Entries 1024K.
- What is the IPv6 routing capability?
- Up to 390 Mpps for IPv6 Routing.
- Can you detail the Layer 2 Bridging performance?
- L2 Bridging Up To 720 Mpps.
- How many VLANs are supported?
- VLAN 4K.
- What is the capacity for VPLS?
- Up to 390 Mpps for VPLS.
- Is there support for hardware-assisted NAT?
- NAT Hardware Assisted.
- How many MAC entries does it support?
- MAC Entries 128K.
- What is the software compatibility?
- Compatible with Cisco 12.2(50)SY and future releases.
- What are the flash memory specifications?
- Flash Memory 1 GB.
Product Review
The Cisco VS-S2T-10G-XL offers substantial capacity for routing and switching, supporting up to 1024K IPv4 routes and providing high throughput with IPv4 routing up to 720 Mpps and IPv6 routing up to 390 Mpps. However, its performance with IPv6 routing, though significant, is almost half that of IPv4, which could be a limitation in IPv6-heavy networks. Additionally, the device's compatibility with Cisco 12.2(50)SY and future releases ensures long-term usability, but the requirement for substantial flash memory and NVRAM could present challenges in resource-constrained environments.
Overview
The Cisco VS-S2T-10G-XL is a high-capacity network module designed to enhance the scalability and performance of a wide range of Cisco Catalyst switch platforms. It is engineered to support complex, high-demand networks, offering a comprehensive suite of features and capabilities. At its core, the Cisco VS-S2T-10G-XL boasts impressive routing capabilities, with support for up to 1024K IPv4 routes and 512K IPv6 routes, ensuring it can handle extensive network environments efficiently. Its Netflow entries also reach up to 1024K, which facilitates detailed network traffic analysis.
In terms of performance, the module excels with IPv4 routing capabilities of up to 720 million packets per second (Mpps) and IPv6 routing up to 390 Mpps. This high throughput ensures that even in data-intensive scenarios, network efficiency is maintained. Additionally, Layer 2 (L2) bridging also reaches up to 720 Mpps, further underscoring its ability to swiftly process and forward traffic. The Cisco VS-S2T-10G-XL also supports up to 4K VLANs and 16K bridge domains, offering flexibility in network segmentation and enhancing security.
The module's capacity for Virtual Private LAN Service (VPLS) and Generic Routing Encapsulation (GRE) both peak at 390 Mpps, while it also includes hardware-assisted Network Address Translation (NAT) to maintain high performance across diverse network tasks. Its MAC entry capacity stands at 128K, with equal capacity for IPv4 and IPv6 multicast routes, allowing for efficient network resource distribution and management.
For network security and quality of service (QoS), the Cisco VS-S2T-10G-XL provides 256K shared entries for Layer 3 classification, supporting advanced QoS and security policies. It also features an extensive set of rate limiters and Access Control Lists (ACLs), including:
- Aggregate traffic rate limiting policers: 16348
- Layer 2 rate limiters: 20 ingress and 6 egress
- MAC ACLs: per port support
- Security ACL entries: 256K shared for QoS/security
- CPU rate limiters: 57
This allows for granular control over network traffic, ensuring optimal performance and security. The module also supports up to 16K interfaces with unique ACLs and 16 Reverse Path Forwarding (RPF) interfaces, underscoring its extensive filtering and forwarding capabilities.
Key hardware specifications include 4 MB of NVRAM and 1 GB of flash memory, providing sufficient storage for software, configurations, and system logs. The Cisco VS-S2T-10G-XL is compatible with Cisco software version 12.2(50)SY and future releases, ensuring long-term usability and support. It also supports private VLANs, offering additional security and network segmentation options.
In summary, the Cisco VS-S2T-10G-XL is a powerful network module that offers high-speed routing, extensive ACLs, and superior traffic management features suitable for demanding network environments. With its advanced capabilities and compatibility with future software releases, it represents a strategic investment for businesses aiming to bolster their network infrastructure.
Specifications
| Part Identifier | Cisco VS-S2T-10G-XL |
| IPv4 Route Capacity | 1,024,000 |
| IPv6 Route Capacity | 512,000 |
| IPv4 Routing Performance | Maximum 720 million packets per second (Mpps) |
| IPv6 Routing Performance | Maximum 390 Mpps |
| Layer 2 Switching Rate | Maximum 720 Mpps |
| VLAN Support | Up to 4,000 |
| Bridge Domain Support | Up to 16,000 |
| VPLS Performance | Maximum 390 Mpps |
| GRE Performance | Maximum 390 Mpps |
| NAT Type | Supported with Hardware Acceleration |
| MAC Address Capacity | 128,000 entries |
| Multicast Route Capacity | 128,000 for both IPv4 and IPv6 |
| Layer 3 Filters for QoS/Security | 256,000 entries shared |
| Aggregate Traffic Policers | 16,348 |
| Layer 2 Traffic Control | 20 ingress/6 egress limiters |
| Per-Port MAC ACL Support | Available |
| Security Filters Capacity | 256,000 entries shared for QoS/Security |
| CPU Traffic Limiters | 57 |
| uRPF Maximum Check | 16 |
| Unique ACL Interface Count | 16,000 |
| RPF Interface Count | 16 |
| Private VLAN Capability | Supported |
| Compatible Software Version | Cisco IOS 12.2(50)SY onwards |
| NVRAM Size | 4 Megabytes |
| Flash Storage Capacity | 1 Gigabyte |