RSF Supply is not an authorized distributor. We sell Preowned Surplus and Refurbished products, all warranties are with RSF Supply and not the manufacturer. Firmware or Software is not included.
Overview
- Transmitter wavelengths range from 1264.5 nm to 1337.5 nm across four lanes, supporting varied networking requirements and enhancing signal integrity.
- Transmitter and receiver power levels are meticulously balanced, with a minimum output power of -7.0 dBm and a maximum of 2.3 dBm for each lane, ensuring optimal performance and signal strength over the entire transmission distance.
- The device is designed for use with 9/125 µm core/cladding single-mode fiber, maximizing the efficiency and reliability of data transmission over the supported 2 km distance.
Specs
Part Number | Juniper JNP-QSFP-40GE-IR4 |
Manufacturer | Juniper |
Optics Type | QSFP+ 40GBASE-IR4 |
Operating Wavelength | 1310 nm |
Maximum Reach | 2 km over SMF |
Interface Speed | 40 Gigabit Ethernet |
Form Factor | QSFP+ |
Connector Type | Duplex LC |
Data Rate Per Lane | 40 Gbps (10 Gbps per lane) |
Number of Fiber Strands | 2 |
Wavelength per Lane | Lane 0: 1264.5 - 1277.5 nm, Lane 1: 1284.5 - 1297.5 nm, Lane 2: 1304.5 - 1317.5 nm, Lane 3: 1324.5 - 1337.5 nm |
Minimum Output Power per Lane | -7.0 dBm |
Maximum Output Power per Lane | 2.3 dBm |
Minimum Input Power per Lane | -11.5 dBm |
Maximum Input Power per Lane | 2.3 dBm |
Fiber Type | Single-Mode Fiber (SMF) |
Fiber Core/Cladding Diameter | 9/125 µm |
Transmission Distance | Up to 2 km |
Power Consumption | 3.5 W Max |
Minimum Operating Temperature | 0° C |
Maximum Operating Temperature | 70° C |
Minimum Storage Temperature | -40° C |
Maximum Storage Temperature | 85° C |
Maximum Operating Altitude | 10,000 ft (3,048 m) |
JNP-QSFP-40GE-IR4
Orders typically ship within 1-3 Business days, if you need an item to ship sooner please contact us.
Product Description
The JNP-QSFP-40GE-IR4 is a Juniper QSFP+ transceiver designed for 40 Gigabit Ethernet with a speed of 40 Gbps, utilizing four lanes with signaling rates of 10 Gbps each. It operates at a wavelength of 1310 nm for efficient transmission over single-mode fiber (SMF) up to 2 km, featuring a duplex LC connector. The transceiver supports a maximum power consumption of 3.5 W, operates within a temperature range of 0° C to 70° C, and is suitable for use at altitudes up to 10,000 ft (3,048 m).FAQs for the JNP-QSFP-40GE-IR4
- What is the maximum transmission distance of the QSFP+ 40GBASE-IR4 on single-mode fiber (SMF)?
The QSFP+ 40GBASE-IR4 can transmit data up to 2 km on SMF. - How many lanes does the part utilize for signaling, and what is the rate per lane?
It uses four lanes for signaling, with each lane capable of 10 Gbps, totaling a signaling rate of 40 Gbps. - What type of connector is used with this transceiver?
The QSFP+ 40GBASE-IR4 uses a duplex LC connector. - What are the operating and storage temperature ranges for the QSFP+ 40GBASE-IR4?
Operating temperature ranges from 0° C to 70° C, and storage temperature ranges from -40° C to 85° C. - Can the QSFP+ 40GBASE-IR4 be used in high-altitude environments?
Yes, it can operate at altitudes up to 10,000 ft (3,048 m). - What is the power consumption of this 40 Gigabit Ethernet transceiver?
It has a maximum power consumption of 3.5 W. - What are the minimum and maximum transmitter output powers per lane for the QSFP+ 40GBASE-IR4?
The minimum is -7.0 dBm and the maximum is 2.3 dBm per lane. - What are the wavelength ranges for each transmitting lane?
Lane 0 ranges from 1264.5 nm to 1277.5 nm, Lane 1 from 1284.5 nm to 1297.5 nm, Lane 2 from 1304.5 nm to 1317.5 nm, and Lane 3 from 1324.5 nm to 1337.5 nm. - What is the receiver input power range per lane for this QSFP+ module?
The minimum receiver input power is -11.5 dBm, and the maximum is 2.3 dBm per lane. - What core size and cladding are required for the SMF used with this transceiver?
The required core size is 9 µm with a cladding of 125 µm.
Product Review
The Juniper JNP-QSFP-40GE-IR4 offers a 40 Gigabit Ethernet connection through QSFP+ with a transmission distance of up to 2 km on single-mode fiber, catering to extended network deployments. The transceiver supports a diverse wavelength range across four lanes, enhancing compatibility and performance in multi-vendor environments. However, its maximum power consumption of 3.5W and the operating temperature range of 0°C to 70°C may limit its use in environments with strict energy efficiency requirements or extreme temperature conditions.
Overview
- Transmitter wavelengths range from 1264.5 nm to 1337.5 nm across four lanes, supporting varied networking requirements and enhancing signal integrity.
- Transmitter and receiver power levels are meticulously balanced, with a minimum output power of -7.0 dBm and a maximum of 2.3 dBm for each lane, ensuring optimal performance and signal strength over the entire transmission distance.
- The device is designed for use with 9/125 µm core/cladding single-mode fiber, maximizing the efficiency and reliability of data transmission over the supported 2 km distance.
Specifications
Part Number | Juniper JNP-QSFP-40GE-IR4 |
Manufacturer | Juniper |
Optics Type | QSFP+ 40GBASE-IR4 |
Operating Wavelength | 1310 nm |
Maximum Reach | 2 km over SMF |
Interface Speed | 40 Gigabit Ethernet |
Form Factor | QSFP+ |
Connector Type | Duplex LC |
Data Rate Per Lane | 40 Gbps (10 Gbps per lane) |
Number of Fiber Strands | 2 |
Wavelength per Lane | Lane 0: 1264.5 - 1277.5 nm, Lane 1: 1284.5 - 1297.5 nm, Lane 2: 1304.5 - 1317.5 nm, Lane 3: 1324.5 - 1337.5 nm |
Minimum Output Power per Lane | -7.0 dBm |
Maximum Output Power per Lane | 2.3 dBm |
Minimum Input Power per Lane | -11.5 dBm |
Maximum Input Power per Lane | 2.3 dBm |
Fiber Type | Single-Mode Fiber (SMF) |
Fiber Core/Cladding Diameter | 9/125 µm |
Transmission Distance | Up to 2 km |
Power Consumption | 3.5 W Max |
Minimum Operating Temperature | 0° C |
Maximum Operating Temperature | 70° C |
Minimum Storage Temperature | -40° C |
Maximum Storage Temperature | 85° C |
Maximum Operating Altitude | 10,000 ft (3,048 m) |