RSF Supply is not an authorized distributor. We sell Preowned Surplus and Refurbished products, all warranties are with RSF Supply and not the manufacturer. Firmware or Software is not included.
Overview
The Cisco WS-X6708-10G-3C is a high-performance module designed for the Cisco Catalyst 6500 E-Series chassis, offering advanced features tailored for demanding network environments. This module comes equipped with eight Gigabit Ethernet ports, utilizing X2 optics for superior data transmission capabilities. It is designed to facilitate a seamless 40 Gbps switch fabric connection, ensuring efficient handling of data across the network. Notably, this module operates with a 1:1 oversubscription rate, indicating a balanced approach between port density and throughput performance.
At the heart of its operation, the WS-X6708-10G-3C features a Distributed Forwarding Card (DFC3C), enhancing its ability to process and forward data with precision. This card supports a substantial number of forwarding entries, up to 256,000, allowing for extensive network segmentation and efficient data routing. The module's sophisticated queuing mechanism is designed to prioritize data packets based on Class of Service (CoS) and Differentiated Services Code Point (DSCP), ensuring that critical information is delivered promptly and reliably.
The scheduling capabilities of this module are robust, including Deficit Weighted Round Robin (DWRR), Weighted Random Early Detection (WRED), and Shaped Round Robin (SRR) at egress. These features work together to optimize the flow of data, preventing congestion and maintaining quality of service across the network. Additionally, each port on the WS-X6708-10G-3C is equipped with 200 MB of buffer space, and the module supports jumbo frames up to 9216 bytes, facilitating the efficient transmission of large data packets.
- Maximum port density reaches 66 ports in a 9-slot chassis and doubles to 132 ports in a Virtual Switching System (VSS) configuration.
- Compatible with Cisco Catalyst 6500 Series Virtual Switching Supervisor Engine 720, it offers flexibility in network design and scalability.
- Equipped with 1 GB of onboard memory, enhancing its processing capabilities to handle extensive network demands.
Specs
| Part Number | Cisco WS-X6708-10G-3C |
| Manufacturer | Cisco |
| Ports Quantity | 8 10 Gigabit Ethernet |
| Optical Interface Type | X2 |
| Switching Fabric Interface Speed | 40 Gigabits per second |
| Port Oversubscription Ratio | 1:1 |
| Forwarding Processor | Incorporates DFC3C for Decentralized Packet Processing |
| Routing Table Size | Supports 256,000 Entries |
| Prioritization Technology | Supports both CoS and DSCP for Queue Mapping |
| Traffic Scheduling Algorithms | Implements DWRR, WRED, and SRR for Egress Traffic Shaping |
| Per-Port Memory Allocation | 200 Megabytes |
| Support for Large Frames | Handles Frames up to 9216 Bytes |
| Peak Port Count per Enclosure | 66 Ports for 9-Slot Enclosure |
| Maximum Ports in VSS Configuration | 132 Ports |
| Compatible Supervisor Engines | Supports Cisco Catalyst 6500 Series Virtual Switching Supervisor Engine 720 with 10GE Uplinks or Supervisor Engine 720 with any PFC |
| Enclosure Compatibility | Compatible with All Cisco Catalyst 6500 E-Series Enclosures |
| RAM | 1 Gigabyte |
| Dimensions (H x W x D) | 1.2 x 14.4 x 16 inches |
| Unit Weight | 13 pounds |
| Operational Temperature Range | 0 °C to 55 °C |
| Storage Temperature Range | -40 °C to 75 °C |
| Humidity Tolerance | 10% to 90%, Non-Condensing |
| Maximum Operating Altitude | -500 to 10,000 feet |
| Energy Consumption | 444.36 Watts |
| Diagnostic LEDs | Indicators for Status and Link Activity |
WS-X6708-10G-3C
Sold out
Original price
$0.00
-
Original price
$0.00
Original price
$0.00
$0.00
-
$0.00
Current price
$0.00
Orders typically ship within 1-3 Business days, if you need an item to ship sooner please contact us.
Product Description
The WS-X6708-10G-3C is equipped with 8 GbE ports supporting X2 optics and connects to the switch fabric at 40 Gbps. It features a DFC3C forwarding engine, supporting up to 256,000 forwarding entries, and offers advanced queuing mechanisms, including CoS and DSCP based queue mapping, with a DWRR, WRED, and SRR scheduler. Each port is designed with 200 MB buffers, supports jumbo frames up to 9216 bytes, and operates efficiently within a temperature range of 0 °C to 55 °C, requiring 444.36 W of power.FAQs for the WS-X6708-10G-3C
- What is the number of Gigabit Ethernet ports available?
The device offers 8 GbE ports. - How does the forwarding engine enhance the device's performance?
Equipped with DFC3C, the forwarding engine enables distributed forwarding, improving performance. - Can you detail the switch's fabric connection capacity?
The switch fabric connection capacity is 40 Gbps. - What type of optics does the device support?
It supports X2 optics. - What is the oversubscription ratio of the device?
The oversubscription ratio is 1:1. - How many forwarding entries does the device support?
It supports 256,000 forwarding entries. - Describe the queuing mechanism employed by the device.
The device uses Class of Service (CoS) and Differentiated Services Code Point (DSCP) for queue mapping. - What is the maximum port density per chassis?
The maximum port density per chassis is 66 ports for a 9-slot chassis. - What types of supervisor engines are supported?
Supports Cisco Catalyst 6500 Series Virtual Switching Supervisor Engine 720 with 10GE uplinks or Supervisor Engine 720 with any PFC. - What are the power requirements for the device?
The power requirement is 444.36 W.
Product Review
The Cisco WS-X6708-10G-3C module offers eight 10GbE ports with X2 optics, providing high-density connectivity and a 40 Gbps switch fabric connection, aligning well with high-performance networking demands. The module supports a 1:1 oversubscription rate and comes equipped with a DFC3C for distributed forwarding, enabling efficient handling of up to 256,000 forwarding entries and advanced queuing mechanisms, which enhances network traffic management. However, its power requirement of 444.36 W and the need for a compatible Cisco Catalyst 6500 E-Series chassis may limit its deployment flexibility in environments not already using Cisco infrastructure or those sensitive to power consumption.
Overview
The Cisco WS-X6708-10G-3C is a high-performance module designed for the Cisco Catalyst 6500 E-Series chassis, offering advanced features tailored for demanding network environments. This module comes equipped with eight Gigabit Ethernet ports, utilizing X2 optics for superior data transmission capabilities. It is designed to facilitate a seamless 40 Gbps switch fabric connection, ensuring efficient handling of data across the network. Notably, this module operates with a 1:1 oversubscription rate, indicating a balanced approach between port density and throughput performance.
At the heart of its operation, the WS-X6708-10G-3C features a Distributed Forwarding Card (DFC3C), enhancing its ability to process and forward data with precision. This card supports a substantial number of forwarding entries, up to 256,000, allowing for extensive network segmentation and efficient data routing. The module's sophisticated queuing mechanism is designed to prioritize data packets based on Class of Service (CoS) and Differentiated Services Code Point (DSCP), ensuring that critical information is delivered promptly and reliably.
The scheduling capabilities of this module are robust, including Deficit Weighted Round Robin (DWRR), Weighted Random Early Detection (WRED), and Shaped Round Robin (SRR) at egress. These features work together to optimize the flow of data, preventing congestion and maintaining quality of service across the network. Additionally, each port on the WS-X6708-10G-3C is equipped with 200 MB of buffer space, and the module supports jumbo frames up to 9216 bytes, facilitating the efficient transmission of large data packets.
- Maximum port density reaches 66 ports in a 9-slot chassis and doubles to 132 ports in a Virtual Switching System (VSS) configuration.
- Compatible with Cisco Catalyst 6500 Series Virtual Switching Supervisor Engine 720, it offers flexibility in network design and scalability.
- Equipped with 1 GB of onboard memory, enhancing its processing capabilities to handle extensive network demands.
Specifications
| Part Number | Cisco WS-X6708-10G-3C |
| Manufacturer | Cisco |
| Ports Quantity | 8 10 Gigabit Ethernet |
| Optical Interface Type | X2 |
| Switching Fabric Interface Speed | 40 Gigabits per second |
| Port Oversubscription Ratio | 1:1 |
| Forwarding Processor | Incorporates DFC3C for Decentralized Packet Processing |
| Routing Table Size | Supports 256,000 Entries |
| Prioritization Technology | Supports both CoS and DSCP for Queue Mapping |
| Traffic Scheduling Algorithms | Implements DWRR, WRED, and SRR for Egress Traffic Shaping |
| Per-Port Memory Allocation | 200 Megabytes |
| Support for Large Frames | Handles Frames up to 9216 Bytes |
| Peak Port Count per Enclosure | 66 Ports for 9-Slot Enclosure |
| Maximum Ports in VSS Configuration | 132 Ports |
| Compatible Supervisor Engines | Supports Cisco Catalyst 6500 Series Virtual Switching Supervisor Engine 720 with 10GE Uplinks or Supervisor Engine 720 with any PFC |
| Enclosure Compatibility | Compatible with All Cisco Catalyst 6500 E-Series Enclosures |
| RAM | 1 Gigabyte |
| Dimensions (H x W x D) | 1.2 x 14.4 x 16 inches |
| Unit Weight | 13 pounds |
| Operational Temperature Range | 0 °C to 55 °C |
| Storage Temperature Range | -40 °C to 75 °C |
| Humidity Tolerance | 10% to 90%, Non-Condensing |
| Maximum Operating Altitude | -500 to 10,000 feet |
| Energy Consumption | 444.36 Watts |
| Diagnostic LEDs | Indicators for Status and Link Activity |