juniper

The ACX-MIC-6GE-CU-SFP is a modular interface card designed for the ACX4000, featuring 6xGbE copper/SFP connectivity options. It supports a broad r...

The ACX1100-AC is equipped with 8xGbE copper ports, 4xGbE combination ports (supporting either copper or SFP modules), and is designed for 1U rack ...

The ACX1100-DC Juniper is equipped with 8xGbE copper ports and 4xGbE combination ports (copper or SFP), delivering up to 60 Gbps throughput. Design...

The ACX4000-2-6GE-DC is a Juniper network device featuring a dual power supply and a temperature-hardened design, suitable for challenging environm...

The ACX4000BASE-AC is a Converged Access Gateway Base Unit featuring a 2 Open Slot Chassis with connectivity options including 8xGE Cu+2xGE POE, 2x...

The ACX500-DC Juniper is an indoor networking unit featuring 2x1GbE (SFP) and 4x1GbE (combo) ports with PoE+ support on 3 ports, housed in a 1 U fo...

The ACX5048 is a 1U networking device providing 1.44 Tbps full duplex throughput, with a configuration that includes 48 1GbE/10GbE and six 40GbE in...

The ACX5048-AC-L2-L3 Juniper delivers a 1.44 Tbps full duplex throughput, accommodating high-capacity networking with 48 1GbE/10GbE and six 40GbE i...

The AP43-US Juniper features a Wi-Fi 6 (802.11ax) standard, supporting OFDMA, 1024-QAM, MU MIMO, TWT, and Spatial Frequency Reuse, with backward co...

The AP43E-US Juniper is equipped with 802.11ax (Wi-Fi 6) technology, offering advanced features such as OFDMA, 1024-QAM, MU-MIMO, and TWT, ensuring...

The AP61-US is designed for outdoor deployment, featuring an internal antenna and supporting 802.11ac Wave 2 technology with a 4x4:4 spatial stream...

The BP1A35AA Juniper is equipped with a 32 Channel DWDM MUX/Demux 8 Channel Module 1, designed for high-capacity data transmission. It supports Opt...

The BP3AM4DL-01 is a 10GBase-DWDM XFP transceiver designed for long-distance optical communications over single-mode fiber (SMF), featuring a C-Ban...

The CB-M120-S Juniper features a chassis dimension of 17.5" (W) x 20.75" (H) x 25.7" (D), weighing 110 lb for the chassis alone and 230 lb when ful...

The CBL-M-PWR-RA-TWLK-US Juniper features a NEMA L6-20P connector on one end and a IEC 320 EN 60320 C19 connector on the other, designed for compat...

The CFP-100GBASE-SR10 transceiver is designed for short-range, high-bandwidth communications over multimode fiber (MMF), utilizing a MPO-24 connect...

The CFP2-100G-ER4-D is a CFP2 module designed for 100G Ethernet and OTU4 applications, supporting data rates from 103.1 to 112 Gbps over a maximum ...

The CFP2-100GBASE-LR4 Juniper is designed for high-speed networking, supporting a 112Gbps bit rate and a 27.95Gbps operating electrical serial data...

The CFP2-100GBASE-SR10 is a 100Gbps CFP2 transceiver with a multi-mode optical interface designed for 103.1Gb/s to 112Gb/s bit rates, ensuring comp...

The CHAS-BP-MX240-S is a Juniper MX Series 4-Slot MX240 Base Router Chassis, featuring 1 SCB and 4 expansion slots. It supports a 1.92 Tbps through...

The CHAS-BP-MX480 is a Juniper-based, rack-mountable networking chassis featuring 8 total expansion slots for switch control boards, supporting a s...

The CHAS-BP-MX480-S Juniper chassis features 6 MPC slots with a per slot capacity of 480 Gbps and supports a system throughput of 5.76 Tbps. It is ...

The CHAS-BP-MX960-S is a Juniper-based, rack-mountable chassis featuring 14 total expansion slots for switch control boards and supports a power su...

The CHAS-BP-TX-S TX Matrix Core Router Chassis is designed for high-capacity networking, featuring 9 total expansion slots for switch fabric cards....