RSF Supply is not an authorized distributor. We sell Preowned Surplus and Refurbished products, all warranties are with RSF Supply and not the manufacturer. Firmware or Software is not included.
Overview
The RUCKUS 901-R710-WW00 is a high-end 802.11ac Wave 2 dual-concurrent access point that incorporates advanced technologies such as Multi-User MIMO (MU-MIMO) and BeamFlex+ to enhance network performance and reliability. This device is designed to support a high density of users, with the capability to handle up to 512 concurrent users, making it suitable for busy environments.
Hardware specifications reveal that the RUCKUS 901-R710-WW00 operates on both 2.4 GHz and 5 GHz bands, offering maximum transmit powers of 28 dBm for each. It utilizes physical antenna gains of 3 dBi across both bands to maintain strong and reliable connections. The access point is equipped with over 4,000 antenna patterns per band, enhancing its ability to adapt to various environments by dynamically selecting the best antenna pattern for each connected device.
Key features of the BeamFlex+ technology include a SINR Tx gain of up to 6 dB, SINR Rx gain of between 3-5 dB, and interference mitigation of up to 15 dB. These capabilities significantly improve the signal quality and network performance by reducing interference and boosting the signal-to-noise ratio. The minimum Rx sensitivity of -104 dBm ensures the access point can detect and connect to devices with weak signals.
Connectivity is facilitated through two Ethernet ports that support auto MDX, auto-sensing 10/100/1000 Mbps connections, and Power over Ethernet (PoE) through 802.3af/at with Category 5/5e/6 cable. The device also supports Link Aggregation (LACP), enhancing its bandwidth capabilities by combining multiple network connections in parallel.
- DC Input: 12 VDC 2A
- PoE: 802.3af/at with a peak power consumption of 12.95W in 802.3af mode
- Radio chains: 4x4:4 with support for channelization of 20 MHz, 40 MHz, and/or 80 MHz
Specs
| Item Number | 901-R710-WW00 by RUCKUS |
| Product Type | Wave 2 802.11ac high-performance access point, supports dual-concurrent bands with MU-MIMO and BeamFlex+ |
| Power Requirements | DC Input: 12VDC, 2A |
| Power over Ethernet | Complies with 802.3af/at standards; in 802.3af mode, 2.4GHz operation is limited to 2x4 (two transmit chains at 22dBm combined power, four receive chains) |
| Simultaneous Connections | Supports up to 512 users |
| Antenna Patterns | Over 4,000 per frequency band |
| QoS Support | 802.11e/WMM enabled |
| Peak Transmit Power | 28 dBm for both 2.4GHz and 5GHz bands |
| Antenna Gain | 3 dBi for both 2.4 and 5GHz |
| BeamFlex+ SINR Transmit Gain | Up to 6 dB improvement |
| BeamFlex+ SINR Receive Gain | Improvement range of 3-5 dB |
| Interference Reduction | Up to 15 dB |
| Receiver Sensitivity | -104 dBm minimum |
| LAN Ports | Two RJ-45 ports supporting 10/100/1000 Mbps, with auto MDX and auto-sensing capabilities |
| LAN Features | Support for Power over Ethernet (PoE 802.3af/at) and Link Aggregation (LACP) |
| Operating Temperature Range | -4°F to 140°F (-20°C to 60°C) |
| Operating Humidity Tolerance | Maximum 95% non-condensing |
| VLAN Support | Dynamic per user or one per BSSID via 802.1Q, based on RADIUS |
| Maximum Physical Data Rate | 1733 Mbps on 5GHz, 600 Mbps on 2.4GHz |
| Wi-Fi Standards | 802.11ac on 5GHz, 802.11n on 2.4GHz |
| Power Consumption | 12.95W peak in 802.3af mode |
| Radio Chains and Streams | 4x4:4 configuration |
| Channel Widths Supported | 20 MHz, 40 MHz, and 80 MHz |
901-R710-WW00
Sold out
Original price
$0.00
-
Original price
$0.00
Original price
$0.00
$0.00
-
$0.00
Current price
$0.00
Orders typically ship within 1-3 Business days, if you need an item to ship sooner please contact us.
Product Description
The 901-R710-WW00 RUCKUS is a high-end 802.11ac Wave 2 dual-concurrent Access Point (AP) featuring MU-MIMO and BeamFlex+ technology, designed to enhance signal quality and network efficiency. It supports a maximum PHY rate of 1733 Mbps on 5GHz and 600 Mbps on 2.4GHz, with a capability to serve up to 512 concurrent users. This AP is equipped with two Ethernet ports supporting auto-sensing 10/100/1000 Mbps connections and Power over Ethernet (802.3af/at), ensuring versatile and efficient network deployments.FAQs for the 901-R710-WW00
- What is the maximum data rate supported by the 802.11ac Wave 2 AP?
The maximum PHY rate is 1733 Mbps on 5GHz and 600 Mbps on 2.4GHz. - How does the AP's PoE 802.3af mode affect the 2.4GHz band?
In 802.3af mode, the 2.4GHz band is limited to 2x4 (2-chain transmit at 22dBm aggregate power, 4-chain receive). - What are the AP's capabilities in terms of concurrent user support?
It can support up to 512 concurrent users. - What type of antenna technology does the AP use?
It utilizes BeamFlex+ technology, offering over 4,000 antenna patterns per band. - What are the AP's power input options?
DC input is 12 VDC 2A, and it also supports Power over Ethernet (802.3af/at). - Can you detail the AP's Ethernet capabilities?
It has 2 Ethernet ports, supporting auto MDX, auto-sensing 10/100/1000 Mbps, RJ-45, PoE (802.3af/at), and Link Aggregation (LACP). - What are the maximum transmit powers for the AP?
Maximum transmit power is 28 dBm on both 2.4 GHz and 5 GHz bands. - How does the AP handle interference and signal strength?
BeamFlex technology provides up to 6 dB SINR Tx gain, 3-5 dB SINR Rx gain, and up to 15 dB interference mitigation. - What is the AP's operating temperature range?
It can operate between -4°F (-20°C) and 140°F (60°C). - How does the AP support VLANs?
It supports 802.1Q VLANs, which can be assigned per BSSID or dynamically per user based on RADIUS.
Product Review
The RUCKUS 901-R710-WW00 Access Point offers impressive performance capabilities, including a maximum PHY rate of 1733 Mbps on 5GHz and 600 Mbps on 2.4GHz, leveraging 802.11ac Wave 2 technology for efficient high-speed connectivity. However, its operation in 802.3af mode restricts the 2.4GHz band to 2x4, potentially limiting performance in high-density environments. Additionally, the device supports a high number of concurrent users (up to 512), and with over 4,000 antenna patterns per band, it effectively enhances signal strength and reduces interference, making it well-suited for busy networks.
Overview
The RUCKUS 901-R710-WW00 is a high-end 802.11ac Wave 2 dual-concurrent access point that incorporates advanced technologies such as Multi-User MIMO (MU-MIMO) and BeamFlex+ to enhance network performance and reliability. This device is designed to support a high density of users, with the capability to handle up to 512 concurrent users, making it suitable for busy environments.
Hardware specifications reveal that the RUCKUS 901-R710-WW00 operates on both 2.4 GHz and 5 GHz bands, offering maximum transmit powers of 28 dBm for each. It utilizes physical antenna gains of 3 dBi across both bands to maintain strong and reliable connections. The access point is equipped with over 4,000 antenna patterns per band, enhancing its ability to adapt to various environments by dynamically selecting the best antenna pattern for each connected device.
Key features of the BeamFlex+ technology include a SINR Tx gain of up to 6 dB, SINR Rx gain of between 3-5 dB, and interference mitigation of up to 15 dB. These capabilities significantly improve the signal quality and network performance by reducing interference and boosting the signal-to-noise ratio. The minimum Rx sensitivity of -104 dBm ensures the access point can detect and connect to devices with weak signals.
Connectivity is facilitated through two Ethernet ports that support auto MDX, auto-sensing 10/100/1000 Mbps connections, and Power over Ethernet (PoE) through 802.3af/at with Category 5/5e/6 cable. The device also supports Link Aggregation (LACP), enhancing its bandwidth capabilities by combining multiple network connections in parallel.
- DC Input: 12 VDC 2A
- PoE: 802.3af/at with a peak power consumption of 12.95W in 802.3af mode
- Radio chains: 4x4:4 with support for channelization of 20 MHz, 40 MHz, and/or 80 MHz
Specifications
| Item Number | 901-R710-WW00 by RUCKUS |
| Product Type | Wave 2 802.11ac high-performance access point, supports dual-concurrent bands with MU-MIMO and BeamFlex+ |
| Power Requirements | DC Input: 12VDC, 2A |
| Power over Ethernet | Complies with 802.3af/at standards; in 802.3af mode, 2.4GHz operation is limited to 2x4 (two transmit chains at 22dBm combined power, four receive chains) |
| Simultaneous Connections | Supports up to 512 users |
| Antenna Patterns | Over 4,000 per frequency band |
| QoS Support | 802.11e/WMM enabled |
| Peak Transmit Power | 28 dBm for both 2.4GHz and 5GHz bands |
| Antenna Gain | 3 dBi for both 2.4 and 5GHz |
| BeamFlex+ SINR Transmit Gain | Up to 6 dB improvement |
| BeamFlex+ SINR Receive Gain | Improvement range of 3-5 dB |
| Interference Reduction | Up to 15 dB |
| Receiver Sensitivity | -104 dBm minimum |
| LAN Ports | Two RJ-45 ports supporting 10/100/1000 Mbps, with auto MDX and auto-sensing capabilities |
| LAN Features | Support for Power over Ethernet (PoE 802.3af/at) and Link Aggregation (LACP) |
| Operating Temperature Range | -4°F to 140°F (-20°C to 60°C) |
| Operating Humidity Tolerance | Maximum 95% non-condensing |
| VLAN Support | Dynamic per user or one per BSSID via 802.1Q, based on RADIUS |
| Maximum Physical Data Rate | 1733 Mbps on 5GHz, 600 Mbps on 2.4GHz |
| Wi-Fi Standards | 802.11ac on 5GHz, 802.11n on 2.4GHz |
| Power Consumption | 12.95W peak in 802.3af mode |
| Radio Chains and Streams | 4x4:4 configuration |
| Channel Widths Supported | 20 MHz, 40 MHz, and 80 MHz |