RSF Supply is not an authorized distributor. We sell Preowned Surplus and Refurbished products, all warranties are with RSF Supply and not the manufacturer. Firmware or Software is not included.
Overview
Specs
Part Number and Manufacturer | Cisco AIR-AP3802I-Q-K9 |
Operation Mode | Controller Based |
Compliance Domain | Q |
Frequency Bands | 2 |
Required Software | Must operate on Cisco Unified Wireless Network Software Release 8.2.111.0 or newer, or Cisco IOS® XE Software Release 16.3 or above |
Compatible Wireless LAN Controllers | Supports Cisco 2500, Cisco 3500 Series Wireless Controllers, and Cisco Wireless Controller Module for ISR G2 |
Data Transmission Technology | 4x4 MIMO technology with support for three spatial streams |
Antenna Configuration | Adaptable Radio Antenna (Supports either 2.4 GHz or 5 GHz), with a dedicated 5 GHz antenna |
Diagnostic Indicators | Status LED indicators for various stages and errors including boot loader status, connection status, and operational status |
Dimensions (Width x Length x Height) | 8.66 x 8.68 x 2.46 inches |
Unit Weight | 4.6 pounds |
Lowest Operating Temperature | 0 °C |
Highest Operating Temperature | 40 °C |
Maximum Operating Altitude | 3000 meters at 40 °C |
Lowest Storage Temperature | -30 °C |
Highest Storage Temperature | 70 °C |
Operating Humidity Range | 10% to 90% non-condensing |
Internal Memory | 1024 MB DRAM |
Internal Storage | 256 MB Flash Memory |
Energy Consumption | 25.8 W from Power Sourcing Equipment (22.5 W at the Powered Device) with USB 2.0 port disabled, 30 W from PSE (25.5 W at PD) with USB 2.0 port active |
Target Deployment | Designed for large enterprise environments |
Deployment Environment | Indoor use only |
AIR-AP3802I-Q-K9
Orders typically ship within 1-3 Business days, if you need an item to ship sooner please contact us.
Product Description
The AIR-AP3802I-Q-K9 is a controller-based access point that supports the Q regulatory domain and operates on two bands. It is compatible with Cisco Unified Wireless Network Software Release 8.2.111.0 or later and Cisco IOS ® XE Software Release 16.3, and can be managed by Cisco 2500 and 3500 Series Wireless Controllers, as well as the Cisco Wireless Controller Module for ISR G2. This device features 4 x 4 MIMO technology with three spatial streams, integrated antennas for flexible radio operation in either 2.4 GHz or 5 GHz bands, a dedicated 5 GHz radio, and is designed for indoor use within large enterprise organizations, supporting operating temperatures from 0 °C to 40 °C and an operating altitude up to 9843 ft at 40 °C.FAQs for the AIR-AP3802I-Q-K9
- What regulatory domain does the controller-based networking hardware operate in?
The hardware operates in regulatory domain Q. - Is the Type Controller Based compatible with Cisco 2500 Series Wireless Controllers?
Yes, it is compatible with Cisco 2500 Series Wireless Controllers, among other models. - How many bands does the device support, and what are they?
The device supports 2 bands, specifically flexible radio (either 2.4 GHz or 5 GHz) and a dedicated 5 GHz radio. - What software versions are required for the Type Controller Based?
It requires Cisco Unified Wireless Network Software Release 8.2.111.0 or later, and Cisco IOS® XE Software Release 16.3 or later. - What technology does the device utilize for data transmission?
It utilizes 4 x 4 MIMO with three spatial streams technology. - How does the Type Controller Based indicate its operating status?
It uses status LED indicators for boot loader status, association status, operating status, boot loader warnings, and boot loader errors. - What are the physical dimensions and weight of the device?
The device measures 8.66 x 8.68 x 2.46 inches and weighs 4.6 lbs. - What is the operating temperature range for the Type Controller Based?
The operating temperature range is from 0 °C to 40 °C. - How much RAM and flash memory does the hardware have?
It comes with 1024 MB DRAM and 256 MB flash memory. - What is the maximum power draw of the Type Controller Based when all features are enabled?
The maximum power draw is 25.8 W at the PSE (22.5W at the PD) with all features enabled except for the USB 2.0 port, and 30 W at the PSE (25.5W at the PD) with the USB 2.0 port enabled.
Product Review
The Cisco AIR-AP3802I-Q-K9 access point offers strong performance, supporting 4x4 MIMO with three spatial streams, providing high throughput and coverage for enterprise environments. However, its power draw is relatively high, requiring up to 30W with the USB 2.0 port enabled, which could impact overall power strategy in large deployments. Compatibility with multiple Cisco Wireless LAN Controllers and support for two frequency bands (2.4 GHz and 5 GHz) ensure versatile deployment options and integration into existing networks.
Overview
Specifications
Part Number and Manufacturer | Cisco AIR-AP3802I-Q-K9 |
Operation Mode | Controller Based |
Compliance Domain | Q |
Frequency Bands | 2 |
Required Software | Must operate on Cisco Unified Wireless Network Software Release 8.2.111.0 or newer, or Cisco IOS® XE Software Release 16.3 or above |
Compatible Wireless LAN Controllers | Supports Cisco 2500, Cisco 3500 Series Wireless Controllers, and Cisco Wireless Controller Module for ISR G2 |
Data Transmission Technology | 4x4 MIMO technology with support for three spatial streams |
Antenna Configuration | Adaptable Radio Antenna (Supports either 2.4 GHz or 5 GHz), with a dedicated 5 GHz antenna |
Diagnostic Indicators | Status LED indicators for various stages and errors including boot loader status, connection status, and operational status |
Dimensions (Width x Length x Height) | 8.66 x 8.68 x 2.46 inches |
Unit Weight | 4.6 pounds |
Lowest Operating Temperature | 0 °C |
Highest Operating Temperature | 40 °C |
Maximum Operating Altitude | 3000 meters at 40 °C |
Lowest Storage Temperature | -30 °C |
Highest Storage Temperature | 70 °C |
Operating Humidity Range | 10% to 90% non-condensing |
Internal Memory | 1024 MB DRAM |
Internal Storage | 256 MB Flash Memory |
Energy Consumption | 25.8 W from Power Sourcing Equipment (22.5 W at the Powered Device) with USB 2.0 port disabled, 30 W from PSE (25.5 W at PD) with USB 2.0 port active |
Target Deployment | Designed for large enterprise environments |
Deployment Environment | Indoor use only |