Skip to content
7600-ES20-10G3CXL

RSF Supply is not an authorized distributor. We sell Preowned Surplus and Refurbished products, all warranties are with RSF Supply and not the manufacturer. Firmware or Software is not included.

Overview

The Cisco 7600-ES20-10G3CXL module is a high-performance networking device designed for the Cisco 7600 series routers, offering advanced features and capabilities for efficient data forwarding and routing. This module is not compatible with the Cisco 7603 router but fits well with the other models in the series. It features two ports that support 10 Gigabit Ethernet XFP transceivers, ensuring high-speed data transmission rates equal to or greater than 10 Gbps. Key hardware specifications of the Cisco 7600-ES20-10G3CXL include: - <>
  • Port Type: 10GE XFP, accommodating a variety of supported modules such as XFP-10GLR-OC192SR, XFP-10GER-OC192IR, and XFP-10GZR-OC192LR.
  • Maximum Power Consumption: 494 W, highlighting the device's energy requirements.
  • Operating Conditions: Designed to operate within a temperature range of 0 °C to 40 °C and a relative humidity of 10% to 90%, non-condensing.
This module comes equipped with the DFC 3CXL (Distributed Forwarding Card), which enhances its processing capabilities, allowing for a Layer 3/Layer 4 forwarding rate of over 40 million packets per second (Mpps). This feature, combined with a PXF processor and 128 MB of DRAM with reduced latency, supports the module's ability to efficiently manage and forward data. The device supports an aggregate bandwidth of 10 Gbps and provides up to 16,000 queues, with 8,000 queues per port, facilitating extensive data traffic management and prioritization. The round-trip buffer time of up to 200 ms ensures data is efficiently managed and latency is minimized across the network. For memory and connectivity, the module boasts up to 512 MB of packet memory and two 20 Gbps fabric channels for switch fabric connectivity. These specifications ensure ample capacity and robust connections for handling large volumes of data traffic. Online Insertion and Removal (OIR) support offers flexibility and ease of maintenance, allowing for module replacement or upgrade without disrupting the network's operation. The module also supports a range of license options, including a basic license with IPv6 support and an advanced IP license, enabling customization according to specific network requirements. Minimum software requirements for the Cisco 7600-ES20-10G3CXL include Cisco IOS Release 12.2SRB, ensuring compatibility with advanced networking features and protocols. The device operates efficiently within an operational altitude range of -60 to 2000 meters, catering to various environmental conditions. Compatibility with Cisco Supervisor Engine 720 or RSP720 ensures that the module integrates seamlessly into the network's infrastructure, providing a reliable and scalable solution for high-speed data transmission and routing. In summary, the Cisco 7600-ES20-10G3CXL is a versatile and high-capacity networking module designed for Cisco 7600 series routers, excluding the Cisco 7603 router. It offers advanced features for efficient data forwarding, high-speed connectivity, and reliable network performance, making it a valuable component for managing data-intensive applications and services.

Specs

Item Number Cisco 7600-ES20-10G3CXL
Manufacturer Cisco
Port Count 2
Port Specification 10GE XFP
Speed Capability ≥ 10 Gbps
Includes DFC 3CXL Distributed Forwarding Card
Compatible Modules XFP-10GLR-OC192SR, XFP-10GER-OC192IR, XFP-10GZR-OC192LR
Power Usage Maximum 494 W
Required Cisco IOS Version Cisco IOS Release 12.2SRB
Compatible Cisco Platforms All Cisco 7600 series routers, excluding Cisco 7603 router
Buffer Delay ≤ 200 ms
Bandwidth Total 10 Gbps
Queues Per Port 8,000
Total Queues 16,000
CPU Type PXF
Memory Type 128 MB DRAM with Low Latency
Rate of Forwarding (L3/L4) 40+ Million Packets per Second
Supervisor Engine Compatibility 720 or RSP720
Memory for Packets Up to 512 MB
Fabric Channel Connectivity Dual 20 Gbps Channels
Packet Memory Capacity 512 MB
Support for Hot Swapping Yes
License Types 76-ES20-BASIC-LIC (Basic, Includes IPv6), 76-ES20-ADVIP-LIC (Advanced IP)
Temperature Range for Operation 0 °C to 40 °C
Humidity Range 10% to 90% Non-condensing
Altitude for Operation -60 to 2000 meters

7600-ES20-10G3CXL

by Cisco
Product Line: Cisco 7600-ES20-10G3CXL
Product Type: Router
$0.00 - $701.00
$701.00
$0.00 - $701.00
$701.00
Title: Used

Orders typically ship within 1-3 Business days, if you need an item to ship sooner please contact us.

Product Description

The 7600-ES20-10G3CXL module is designed with two 10GE XFP ports, capable of speeds equal to or exceeding 10 Gbps, and is equipped with a DFC 3CXL Distributed Forwarding Card for enhanced processing. It supports a variety of modules including XFP-10GLR-OC192SR, XFP-10GER-OC192IR, and XFP-10GZR-OC192LR, with a maximum power consumption of 494 W and operates efficiently within a 0 °C to 40 °C temperature range. This model is compatible with all Cisco 7600 series routers, excluding the Cisco 7603, and features two 20 Gbps fabric channels for switch fabric connectivity, supporting a Layer 3/Layer 4 forwarding rate of over 40 Mpps, while facilitating up to 512 MB of packet memory and 128 MB of DRAM with reduced latency.

Key Feature for the 7600-ES20-10G3CXL 

    

  • What is the port type and speed of the networking hardware?
    
The hardware features 2 ports of the 10GE XFP type, each supporting speeds of more than or equal to 10 Gbps.
    • 


  • What modules are supported by the product?
    
Supported modules include XFP-10GLR-OC192SR, XFP-10GER-OC192IR, and XFP-10GZR-OC192LR.
    • 


  • Does the hardware come with a Distributed Forwarding Card?
    
Yes, it comes with a DFC 3CXL Distributed Forwarding Card.
    • 


  • What is the maximum power consumption?
    
The maximum power consumption of the device is 494 W.
    • 


  • What Cisco IOS software release is required?
    
A minimum of Cisco IOS Release 12.2SRB is required for operation.
    • 


  • Is this hardware compatible with all Cisco 7600 series routers?
    
It is compatible with all Cisco 7600 series routers except for the Cisco 7603 router.
    • 


  • What is the aggregate bandwidth and round-trip buffer time?
    
The aggregate bandwidth is 10 Gbps, with a round-trip buffer time of up to 200 ms.
    • 


  • How many queues per port does the device support?
    
The device supports 8,000 queues per port, totaling 16,000 queues.
    • 


  • What are the license options available for this hardware?
    
License options include 76-ES20-BASIC-LIC for basic features including IPv6 and 76-ES20-ADVIP-LIC for advanced IP features.
    • 


  • What are the operating temperature and humidity ranges?
    
The operating temperature range is 0 °C to 40 °C, with a relative humidity range of 10% to 90% (noncondensing).
    •

Product Review

The Cisco 7600-ES20-10G3CXL module offers high performance with dual 10GE XFP ports supporting a variety of XFP modules, ensuring flexibility for high-bandwidth connectivity. With its support for up to 40+ Mpps Layer 3/Layer 4 forwarding rate and equipped with DFC 3CXL for enhanced processing, it is well-suited for demanding network environments. However, its maximum power consumption of 494 W and the requirement for a minimum Cisco IOS Release 12.2SRB may limit its deployment in environments with strict power budgets or older infrastructure.

Overview

The Cisco 7600-ES20-10G3CXL module is a high-performance networking device designed for the Cisco 7600 series routers, offering advanced features and capabilities for efficient data forwarding and routing. This module is not compatible with the Cisco 7603 router but fits well with the other models in the series. It features two ports that support 10 Gigabit Ethernet XFP transceivers, ensuring high-speed data transmission rates equal to or greater than 10 Gbps. Key hardware specifications of the Cisco 7600-ES20-10G3CXL include: - <>
  • Port Type: 10GE XFP, accommodating a variety of supported modules such as XFP-10GLR-OC192SR, XFP-10GER-OC192IR, and XFP-10GZR-OC192LR.
  • Maximum Power Consumption: 494 W, highlighting the device's energy requirements.
  • Operating Conditions: Designed to operate within a temperature range of 0 °C to 40 °C and a relative humidity of 10% to 90%, non-condensing.
This module comes equipped with the DFC 3CXL (Distributed Forwarding Card), which enhances its processing capabilities, allowing for a Layer 3/Layer 4 forwarding rate of over 40 million packets per second (Mpps). This feature, combined with a PXF processor and 128 MB of DRAM with reduced latency, supports the module's ability to efficiently manage and forward data. The device supports an aggregate bandwidth of 10 Gbps and provides up to 16,000 queues, with 8,000 queues per port, facilitating extensive data traffic management and prioritization. The round-trip buffer time of up to 200 ms ensures data is efficiently managed and latency is minimized across the network. For memory and connectivity, the module boasts up to 512 MB of packet memory and two 20 Gbps fabric channels for switch fabric connectivity. These specifications ensure ample capacity and robust connections for handling large volumes of data traffic. Online Insertion and Removal (OIR) support offers flexibility and ease of maintenance, allowing for module replacement or upgrade without disrupting the network's operation. The module also supports a range of license options, including a basic license with IPv6 support and an advanced IP license, enabling customization according to specific network requirements. Minimum software requirements for the Cisco 7600-ES20-10G3CXL include Cisco IOS Release 12.2SRB, ensuring compatibility with advanced networking features and protocols. The device operates efficiently within an operational altitude range of -60 to 2000 meters, catering to various environmental conditions. Compatibility with Cisco Supervisor Engine 720 or RSP720 ensures that the module integrates seamlessly into the network's infrastructure, providing a reliable and scalable solution for high-speed data transmission and routing. In summary, the Cisco 7600-ES20-10G3CXL is a versatile and high-capacity networking module designed for Cisco 7600 series routers, excluding the Cisco 7603 router. It offers advanced features for efficient data forwarding, high-speed connectivity, and reliable network performance, making it a valuable component for managing data-intensive applications and services.

Specifications

Item Number Cisco 7600-ES20-10G3CXL
Manufacturer Cisco
Port Count 2
Port Specification 10GE XFP
Speed Capability ≥ 10 Gbps
Includes DFC 3CXL Distributed Forwarding Card
Compatible Modules XFP-10GLR-OC192SR, XFP-10GER-OC192IR, XFP-10GZR-OC192LR
Power Usage Maximum 494 W
Required Cisco IOS Version Cisco IOS Release 12.2SRB
Compatible Cisco Platforms All Cisco 7600 series routers, excluding Cisco 7603 router
Buffer Delay ≤ 200 ms
Bandwidth Total 10 Gbps
Queues Per Port 8,000
Total Queues 16,000
CPU Type PXF
Memory Type 128 MB DRAM with Low Latency
Rate of Forwarding (L3/L4) 40+ Million Packets per Second
Supervisor Engine Compatibility 720 or RSP720
Memory for Packets Up to 512 MB
Fabric Channel Connectivity Dual 20 Gbps Channels
Packet Memory Capacity 512 MB
Support for Hot Swapping Yes
License Types 76-ES20-BASIC-LIC (Basic, Includes IPv6), 76-ES20-ADVIP-LIC (Advanced IP)
Temperature Range for Operation 0 °C to 40 °C
Humidity Range 10% to 90% Non-condensing
Altitude for Operation -60 to 2000 meters

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare