RSF Supply is not an authorized distributor. We sell Preowned Surplus and Refurbished products, all warranties are with RSF Supply and not the manufacturer. Firmware or Software is not included.
Overview
Specs
Part Number and Manufacturer | Cisco AIR-AP2802E-I-K9 |
Deployment Model | Controller-Based |
Compliance Domain | Domain I |
Frequency Bands Supported | 2 |
Required Operating System | Minimum Cisco Unified Wireless Network Software v8.2.111.0 or newer, Cisco IOS® XE v16.3 or above |
Compatible Wireless LAN Controllers | Cisco 2500 Series, Cisco 3500 Series, Cisco Wireless Controller Module for ISR G2 |
Antenna Configuration | 4x4 MIMO with 3 Spatial Streams |
Antenna Type | Configurable Radio (2.4 GHz or 5 GHz) and Fixed 5 GHz Radio |
Diagnostic LEDs | LEDs for Boot, Connection, Activity, Warnings, and Errors |
Dimensions | 8.66 x 8.77 x 2.50 inches |
Unit Weight | 4.6 pounds |
Lowest Operating Temperature | -20°C |
Highest Operating Temperature | 50°C |
Operational Ceiling | 3000 meters @ 40°C |
Lowest Storage Temperature | -30°C |
Highest Storage Temperature | 70°C |
Minimum Humidity for Operation | 10% (Non-Condensing) |
Maximum Humidity for Operation | 90% (Non-Condensing) |
System Memory | 1024 MB DRAM |
Storage Memory | 256 MB Flash |
Energy Consumption | 22.5W (PSE) / 20W (PD) standard use, 26.5W (PSE) / 23W (PD) with USB 2.0 port active |
Target Deployment | Large-Scale Enterprises |
Environment Suitability | Indoor |
AIR-AP2802E-I-K9
Orders typically ship within 1-3 Business days, if you need an item to ship sooner please contact us.
Product Description
The AIR-AP2802E-I-K9 is a controller-based access point that operates within the Regulatory Domain I and supports dual bands. It is equipped with 4 x 4 MIMO technology with three spatial streams, offering flexible radio deployment over either 2.4 GHz or 5 GHz, in addition to a dedicated 5 GHz radio. This model requires Cisco Unified Wireless Network Software Release 8.2.111.0 or later, or Cisco IOS ® XE Software Release 16.3, and is compatible with various Cisco Wireless LAN Controllers, including the 2500 and 3500 Series, and the Wireless Controller Module for ISR G2, designed for indoor use in large enterprise organizations.Key Feature for the AIR-AP2802E-I-K9
- Q: What software versions support the controller-based access point?
- A: It supports Cisco Unified Wireless Network Software Release 8.2.111.0 or later and Cisco IOS® XE Software Release 16.3.
- Q: Can you detail the technology specifications of the access point?
- A: The access point utilizes 4 x 4 MIMO technology with three spatial streams for enhanced data transmission.
- Q: What wireless LAN controllers are compatible with this access point?
- A: Compatible controllers include Cisco 2500 Series, Cisco 3500 Series, and the Cisco Wireless Controller Module for ISR G2.
- Q: Describe the antenna configuration for the access point.
- A: It features flexible radio antennas which can operate in either 2.4 GHz or 5 GHz bands, along with a dedicated 5 GHz radio.
- Q: How does the access point indicate its operating status?
- A: It uses status LED indicators for boot loader status, association status, operating status, and errors.
- Q: What are the physical dimensions and weight of the access point?
- A: The dimensions are 8.66 x 8.77 x 2.50 inches, and it weighs 4.6 lbs.
- Q: What environmental conditions can the access point operate under?
- A: It operates between -20 °C and 50 °C, with a non-condensing humidity range from 10% to 90%.
- Q: What are the memory specifications of the access point?
- A: It is equipped with 1024 MB DRAM and 256 MB of flash memory.
- Q: How much power does the access point require?
- A: It draws 22.5 W at the PSE with all features enabled except the USB 2.0 port, and 26.5 W with the USB port enabled.
- Q: Is the access point designed for indoor or outdoor use?
- A: It is designed for indoor use within large enterprise organizations.
Product Review
The Cisco AIR-AP2802E-I-K9 offers high-performance networking with its 4x4 MIMO technology and three spatial streams, providing significant throughput and coverage improvements for indoor environments. Compatibility with a range of Cisco Wireless LAN Controllers and support for the latest software versions ensures seamless integration into existing networks. However, its power draw, especially with the USB 2.0 port enabled, and the relatively high weight may limit its deployment flexibility in certain scenarios.
Overview
Specifications
Part Number and Manufacturer | Cisco AIR-AP2802E-I-K9 |
Deployment Model | Controller-Based |
Compliance Domain | Domain I |
Frequency Bands Supported | 2 |
Required Operating System | Minimum Cisco Unified Wireless Network Software v8.2.111.0 or newer, Cisco IOS® XE v16.3 or above |
Compatible Wireless LAN Controllers | Cisco 2500 Series, Cisco 3500 Series, Cisco Wireless Controller Module for ISR G2 |
Antenna Configuration | 4x4 MIMO with 3 Spatial Streams |
Antenna Type | Configurable Radio (2.4 GHz or 5 GHz) and Fixed 5 GHz Radio |
Diagnostic LEDs | LEDs for Boot, Connection, Activity, Warnings, and Errors |
Dimensions | 8.66 x 8.77 x 2.50 inches |
Unit Weight | 4.6 pounds |
Lowest Operating Temperature | -20°C |
Highest Operating Temperature | 50°C |
Operational Ceiling | 3000 meters @ 40°C |
Lowest Storage Temperature | -30°C |
Highest Storage Temperature | 70°C |
Minimum Humidity for Operation | 10% (Non-Condensing) |
Maximum Humidity for Operation | 90% (Non-Condensing) |
System Memory | 1024 MB DRAM |
Storage Memory | 256 MB Flash |
Energy Consumption | 22.5W (PSE) / 20W (PD) standard use, 26.5W (PSE) / 23W (PD) with USB 2.0 port active |
Target Deployment | Large-Scale Enterprises |
Environment Suitability | Indoor |