RSF Supply is not an authorized distributor. We sell Preowned Surplus and Refurbished products, all warranties are with RSF Supply and not the manufacturer. Firmware or Software is not included.
Overview
Specs
Part Number and Manufacturer | Cisco AIR-AP3802P-E-K9 |
Deployment Type | Controller-Based |
Compliance Domain | E |
Frequency Bands | 2 |
Required Software | Minimum of Cisco Unified Wireless Network Software Release 8.2.111.0 or Cisco IOS ® XE Software Release 16.3 |
Compatible Wireless LAN Controllers | Cisco 2500, 3500 Series Wireless Controllers, and Cisco Wireless Controller Module for ISR G2 |
Antenna Technology | 4 x 4 MIMO Technology with Three Spatial Streams |
Antenna Configuration | Adaptable Radio (2.4 GHz or 5 GHz selectable), Dedicated 5 GHz Radio |
Diagnostic LEDs | LEDs for Power-Up Status, Connection Status, Active Status, Warning Signals, Error Signals |
Dimensions (W x L x H) | 8.66 x 8.68 x 2.62 Inches |
Device Weight | 4.6 lbs |
Lowest Operational Temperature | -20 °C |
Highest Operational Temperature | 50 °C |
Max Operational Altitude | 9843 ft at 40 °C |
Lowest Storage Temperature | -30 °C |
Highest Storage Temperature | 70 °C |
Operational Humidity Range | 10% to 90% (Non-Condensing) |
Memory (RAM) | 1024 MB DRAM |
Storage (Flash) | 256 MB |
Power Consumption | 25.8 W (without USB 2.0), 30 W (with USB 2.0) |
Target Deployment | Large Enterprise Organizations |
Environment Suitability | Indoor Use Only |
AIR-AP3802P-E-K9
Orders typically ship within 1-3 Business days, if you need an item to ship sooner please contact us.
Product Description
The AIR-AP3802P-E-K9 is a controller-based access point supporting Cisco Unified Wireless Network Software Release 8.2.111.0 or later and Cisco IOS ® XE Software Release 16.3, designed for indoor use within large enterprise organizations. It features 4 x 4 MIMO technology with three spatial streams and integrated antennas that can operate on either 2.4 GHz or 5 GHz, plus a dedicated 5 GHz radio. This device operates within a temperature range of -20 °C to 50 °C, supports up to 9843 ft operating altitude, and has a power draw of 25.8 W with all features enabled, excluding the USB 2.0 port.Key Feature for the AIR-AP3802P-E-K9
- What type of organizations is this networking hardware designed for?
It is designed for use in large enterprise organizations. - What is the maximum operating temperature of the device?
The maximum operating temperature is 50 °C. - Which wireless LAN controllers support this device?
Supported controllers include the Cisco 2500 Series, Cisco 3500 Series, and the Cisco Wireless Controller Module for ISR G2. - How many bands does the device support, and what are they?
The device supports 2 bands: 2.4 GHz and 5 GHz. - What are the integrated antennas' capabilities?
The integrated antennas offer flexible radio operation in either 2.4 GHz or 5 GHz, along with a dedicated 5 GHz radio. - Can you detail the device's power requirements?
The power draw is 25.8 W at the PSE (22.5W at the PD) with all features enabled except for the USB 2.0 port, and 30 W at the PSE (25.5W at the PD) with the USB 2.0 port enabled. - What are the device's physical dimensions and weight?
The dimensions are 8.66 x 8.68 x 2.62 inches, and it weighs 4.6 lbs. - What is the minimum operating temperature for this device?
The minimum operating temperature is -20 °C. - How much RAM and flash memory does the device have?
It has 1024 MB DRAM and 256 MB of flash memory. - What are the humidity specifications for operating this device?
The operating humidity range is from 10% to 90%, non-condensing.
Product Review
The Cisco AIR-AP3802P-E-K9 supports advanced features with its 4x4 MIMO technology and three spatial streams, enhancing throughput and coverage for high-density environments. Compatibility with multiple Cisco Wireless LAN Controllers and support for both 2.4 GHz and 5 GHz bands allow for flexible deployment options in large enterprises. However, the power draw of up to 30W with the USB 2.0 port enabled and a relatively high weight of 4.6 lbs may limit its installation flexibility and increase operational costs.
Overview
Specifications
Part Number and Manufacturer | Cisco AIR-AP3802P-E-K9 |
Deployment Type | Controller-Based |
Compliance Domain | E |
Frequency Bands | 2 |
Required Software | Minimum of Cisco Unified Wireless Network Software Release 8.2.111.0 or Cisco IOS ® XE Software Release 16.3 |
Compatible Wireless LAN Controllers | Cisco 2500, 3500 Series Wireless Controllers, and Cisco Wireless Controller Module for ISR G2 |
Antenna Technology | 4 x 4 MIMO Technology with Three Spatial Streams |
Antenna Configuration | Adaptable Radio (2.4 GHz or 5 GHz selectable), Dedicated 5 GHz Radio |
Diagnostic LEDs | LEDs for Power-Up Status, Connection Status, Active Status, Warning Signals, Error Signals |
Dimensions (W x L x H) | 8.66 x 8.68 x 2.62 Inches |
Device Weight | 4.6 lbs |
Lowest Operational Temperature | -20 °C |
Highest Operational Temperature | 50 °C |
Max Operational Altitude | 9843 ft at 40 °C |
Lowest Storage Temperature | -30 °C |
Highest Storage Temperature | 70 °C |
Operational Humidity Range | 10% to 90% (Non-Condensing) |
Memory (RAM) | 1024 MB DRAM |
Storage (Flash) | 256 MB |
Power Consumption | 25.8 W (without USB 2.0), 30 W (with USB 2.0) |
Target Deployment | Large Enterprise Organizations |
Environment Suitability | Indoor Use Only |