RSF Supply is not an authorized distributor. We sell Preowned Surplus and Refurbished products, all warranties are with RSF Supply and not the manufacturer. Firmware or Software is not included.
Overview
The Cisco N3K-C3048TP-1GE switch is designed to meet the requirements of modern data centers and high-density networking environments. This device provides a comprehensive solution for scalable and efficient network infrastructure, incorporating a range of features tailored for versatility and performance.
At the core of its specifications, the switch includes 48 fixed 10/100/1000 Mbps Ethernet ports, accommodating a wide array of devices and connections. For higher bandwidth requirements, it is equipped with 4 10 Gbps ports, enabling high-speed connectivity for uplinks or aggregation. Management and configuration are facilitated through a single RS-232 serial console port, and a USB port offers additional connectivity for storage or other peripherals.
This model is designed with redundancy and reliability in mind, featuring dual power supplies and redundant fan units, ensuring uninterrupted operation and optimal cooling within a 1RU form factor. The switch boasts a switching capacity of 176 Gbps and a forwarding rate of 132 Mpps, supporting high-volume traffic without compromising performance.
Support for jumbo frames up to 9216 bytes enhances the efficiency of large data transfers, while a capacity for 128,000 MAC addresses and 4096 VLANs allows for extensive network segmentation and management. The device supports 512 Spanning Tree Protocol (RSTP) instances and 64 Multiple Spanning Tree Protocol (MSTP) instances, facilitating robust network topology and redundancy configurations.
Security and traffic management are robust, with 2000 ingress and 1000 egress Access Control List (ACL) entries. The routing table can accommodate 16,000 prefixes and host entries, along with 8000 multicast routes, ensuring comprehensive coverage and control over network traffic.
The Cisco N3K-C3048TP-1GE supports up to 52 EtherChannels with a maximum of 16 ports per EtherChannel, allowing for flexible link aggregation and increased bandwidth. The shared buffer of 9 MB helps in managing traffic bursts, minimizing packet loss and ensuring smooth data flow.
With a boot flash memory of 2 GB, the switch offers ample storage for the operating system and configurations. It operates efficiently, consuming 120 W of power and dissipating 409 BTU per hour, making it an energy-conscious choice for data centers.
- Dimensions: 1.72 x 17.3 x 19.7 inches, fitting seamlessly into standard racks.
- Temperature Range: Operates between 0 °C and 40 °C, with a relative humidity tolerance of 10% to 85% (noncondensing), suitable for most data center environments.
- Physical Interfaces: 48 Ethernet ports, 4 10 Gbps ports, 1 RS-232 console port, and 1 USB port, providing a versatile set of connectivity options.
Specs
| Part Number and Manufacturer | Cisco N3K-C3048TP-1GE |
| Ethernet Ports (10/100/1000 Mbps) | 48 |
| 10 Gbps Ethernet Ports | 4 |
| RS-232 Serial Console Ports | 1 |
| USB Ports Quantity | 1 |
| Power Supply Units | 2 (Configured for Redundancy) |
| Cooling Fans Configuration | Dual Redundant |
| Enclosure Type | 1 Rack Unit |
| Switch Fabric Capacity | 176 Gigabits per Second |
| Rate of Packet Forwarding | 132 Million Packets per Second |
| Maximum Frame Size | 9216 Bytes |
| MAC Address Table Size | 128,000 Entries |
| Virtual LANs Support | Up to 4096 |
| Spanning Tree Protocol Instances | 512 Rapid-PVST+, 64 MSTP |
| Access Control List (ACL) Support | 2000 Inbound, 1000 Outbound Entries |
| Routing Table Capacity | 16,000 IP Prefixes, 16,000 Hosts, 8000 Multicast Routes |
| Maximum EtherChannel Groups | 52 |
| Ports per EtherChannel Maximum | 16 |
| Memory Buffer | 9 MB Shared |
| Boot Flash Storage | 2 GB |
| Operational Power Consumption | 120 Watts |
| Thermal Output | 409 BTU per Hour |
| Dimensions (Height x Width x Depth) | 1.72 x 17.3 x 19.7 inches |
| Operational Temperature Range | 0 to 40 °C |
| Maximum Operating Temperature | 40 °C |
| Relative Humidity Range During Operation | 10% to 85% Non-condensing |
N3K-C3048TP-1GE
by Cisco
Product Line: Cisco N3KC3048TP1GE
Product Type: 48-port switch with 1 Gigabit Ethernet port
Original price
$453.00
-
Original price
$1,933.00
Original price
$1,933.00
$453.00
-
$1,933.00
Current price
$1,933.00
Orders typically ship within 1-3 Business days, if you need an item to ship sooner please contact us.
Product Description
The N3K-C3048TP-1GE Cisco switch features 48 fixed 10/100/1000 Mbps Ethernet ports and 4 10 Gbps ports, designed for high-density deployments. It offers a switching capacity of 176 Gbps and a forwarding rate of 132 Mpps, supporting up to 9216-byte jumbo frames and 128,000 MAC addresses. With 2 redundant power supplies, redundant fan type, and a compact 1RU form factor, it ensures reliable operation and efficient space utilization in data centers.Key Feature for the N3KC3048TP1GE
- Q: How many fixed 10/100/1000 Mbps Ethernet ports does the switch have?
A: The switch has 48 fixed 10/100/1000 Mbps Ethernet ports. - Q: What is the form factor of this networking device?
A: The device has a 1RU form factor. - Q: How many 10 Gbps ports are available?
A: There are 4 10 Gbps ports available. - Q: What type of power supplies does the switch support?
A: The switch supports 2 redundant power supplies. - Q: What is the switching capacity of the switch?
A: The switching capacity is 176 Gbps. - Q: How many RS-232 Serial Console Ports are there?
A: There is 1 RS-232 Serial Console Port. - Q: What is the forwarding rate of the switch?
A: The forwarding rate is 132 Mpps. - Q: How many USB ports does the switch include?
A: The switch includes 1 USB port. - Q: What is the maximum operating temperature for the switch?
A: The maximum operating temperature is 40 °C. - Q: How many MAC addresses can the switch support?
A: The switch can support 128,000 MAC addresses.
Product Review
The Cisco N3K-C3048TP-1GE offers a solid foundation for small to medium-sized enterprise networks with its 48 fixed Gigabit Ethernet ports and 4 ten Gigabit Ethernet uplinks, facilitating efficient connectivity and high-speed data transfers. Its redundant power supplies and fans, along with a switching capacity of 176 Gbps and a forwarding rate of 132 Mpps, ensure reliable and continuous operation. However, the switch's limited layer 3 features and the modest size of its routing table may not meet the demands of complex networks requiring extensive routing capabilities and scalability.
Overview
The Cisco N3K-C3048TP-1GE switch is designed to meet the requirements of modern data centers and high-density networking environments. This device provides a comprehensive solution for scalable and efficient network infrastructure, incorporating a range of features tailored for versatility and performance.
At the core of its specifications, the switch includes 48 fixed 10/100/1000 Mbps Ethernet ports, accommodating a wide array of devices and connections. For higher bandwidth requirements, it is equipped with 4 10 Gbps ports, enabling high-speed connectivity for uplinks or aggregation. Management and configuration are facilitated through a single RS-232 serial console port, and a USB port offers additional connectivity for storage or other peripherals.
This model is designed with redundancy and reliability in mind, featuring dual power supplies and redundant fan units, ensuring uninterrupted operation and optimal cooling within a 1RU form factor. The switch boasts a switching capacity of 176 Gbps and a forwarding rate of 132 Mpps, supporting high-volume traffic without compromising performance.
Support for jumbo frames up to 9216 bytes enhances the efficiency of large data transfers, while a capacity for 128,000 MAC addresses and 4096 VLANs allows for extensive network segmentation and management. The device supports 512 Spanning Tree Protocol (RSTP) instances and 64 Multiple Spanning Tree Protocol (MSTP) instances, facilitating robust network topology and redundancy configurations.
Security and traffic management are robust, with 2000 ingress and 1000 egress Access Control List (ACL) entries. The routing table can accommodate 16,000 prefixes and host entries, along with 8000 multicast routes, ensuring comprehensive coverage and control over network traffic.
The Cisco N3K-C3048TP-1GE supports up to 52 EtherChannels with a maximum of 16 ports per EtherChannel, allowing for flexible link aggregation and increased bandwidth. The shared buffer of 9 MB helps in managing traffic bursts, minimizing packet loss and ensuring smooth data flow.
With a boot flash memory of 2 GB, the switch offers ample storage for the operating system and configurations. It operates efficiently, consuming 120 W of power and dissipating 409 BTU per hour, making it an energy-conscious choice for data centers.
- Dimensions: 1.72 x 17.3 x 19.7 inches, fitting seamlessly into standard racks.
- Temperature Range: Operates between 0 °C and 40 °C, with a relative humidity tolerance of 10% to 85% (noncondensing), suitable for most data center environments.
- Physical Interfaces: 48 Ethernet ports, 4 10 Gbps ports, 1 RS-232 console port, and 1 USB port, providing a versatile set of connectivity options.
Specifications
| Part Number and Manufacturer | Cisco N3K-C3048TP-1GE |
| Ethernet Ports (10/100/1000 Mbps) | 48 |
| 10 Gbps Ethernet Ports | 4 |
| RS-232 Serial Console Ports | 1 |
| USB Ports Quantity | 1 |
| Power Supply Units | 2 (Configured for Redundancy) |
| Cooling Fans Configuration | Dual Redundant |
| Enclosure Type | 1 Rack Unit |
| Switch Fabric Capacity | 176 Gigabits per Second |
| Rate of Packet Forwarding | 132 Million Packets per Second |
| Maximum Frame Size | 9216 Bytes |
| MAC Address Table Size | 128,000 Entries |
| Virtual LANs Support | Up to 4096 |
| Spanning Tree Protocol Instances | 512 Rapid-PVST+, 64 MSTP |
| Access Control List (ACL) Support | 2000 Inbound, 1000 Outbound Entries |
| Routing Table Capacity | 16,000 IP Prefixes, 16,000 Hosts, 8000 Multicast Routes |
| Maximum EtherChannel Groups | 52 |
| Ports per EtherChannel Maximum | 16 |
| Memory Buffer | 9 MB Shared |
| Boot Flash Storage | 2 GB |
| Operational Power Consumption | 120 Watts |
| Thermal Output | 409 BTU per Hour |
| Dimensions (Height x Width x Depth) | 1.72 x 17.3 x 19.7 inches |
| Operational Temperature Range | 0 to 40 °C |
| Maximum Operating Temperature | 40 °C |
| Relative Humidity Range During Operation | 10% to 85% Non-condensing |