RSF Supply is not an authorized distributor. We sell Preowned Surplus and Refurbished products, all warranties are with RSF Supply and not the manufacturer. Firmware or Software is not included.
Overview
- Up to 256,000 combined MAC addresses and ARP entries, facilitating extensive device connectivity.
- A buffer of 25 MB to manage sudden spikes in traffic, reducing packet loss and improving network performance.
- Support for up to 4096 VLANs in Layer 3 mode, enabling extensive network segmentation and security configurations.
Specs
Model Number | N6K-C6001-64P |
Manufacturer | Cisco |
SFP+ Ports Quantity | 48 |
Speed per SFP+ Port | 10G |
QSFP Ports Quantity | 4 |
Total Switching Capacity | 1.28 Tbps |
Power Supply Units | 2 |
Fan Units | 3 |
Enclosure Type | 1 RU |
Network Latency | Approx. 1 µs |
Multicast Route Limit | 32,000 |
MAC Addresses and ARP Table Size | Up to 256,000 |
Memory Buffer | 25 MB |
Supported VLANs | Up to 4000 (L2), Up to 4096 (L3) |
Access Control List Entries | Up to 4000 |
Maximum STP Instances | 64 |
IPv4 Address Prefixes | Up to 32,000 |
IPv6 Address Prefixes | Up to 8,000 |
IPv4 Multicast Route Entries | Up to 8,000 |
IGMP Groups | Up to 8,000 |
VRF Instances | 4000 |
Average Power Consumption | 750 W |
Peak Power Consumption | 1100 W |
Power Input Range | 94 to 240 VAC |
Support for Hot Swapping | Yes |
Power Efficiency at Half Load | 94% |
Operational Temperature Range | 0 °C to 40 °C |
N6K-C6001-64P
Orders typically ship within 1-3 Business days, if you need an item to ship sooner please contact us.
Product Description
The N6K-C6001-64P is equipped with 48 SFP+ ports capable of 10G speeds and 4 QSFP ports, supporting an overall throughput of 1.28 Tbps. This 1 RU device features two power supplies, three fans, and a 25 MB buffer, designed for low latency of approximately 1 µs. It supports up to 256,000 combined MAC addresses and ARP entries, 4000 VLANs (Layer 2), 4096 VLANs (Layer 3), and 4000 ACL entries, with a typical operating power of 750 W and 94% efficiency at 50% load.Key Feature for the N6KC600164P
- What is the number of SFP+ ports available on this device?
The device has 48 SFP+ ports, each supporting 10G speed. - How does the switch handle power redundancy?
It includes 2 power supplies for redundancy, ensuring continuous operation. - Can you detail the QSFP port capabilities of the switch?
It is equipped with 4 QSFP ports for higher data throughput. - What is the maximum operating power consumption?
The maximum power consumption is 1100 W. - What throughput can be achieved with this switch?
The switch offers an overall throughput of 1.28 Tbps. - What is the form factor of this networking device?
The device has a form factor of 1 RU, making it efficient for rack installations. - How many multicast routes can the switch support?
It supports up to 32,000 multicast routes. - Describe the latency performance of the switch.
The switch has an approximate latency of 1 µs, optimizing network speed and efficiency. - What are the capabilities regarding VLANs?
The switch supports up to 4000 VLANs for Layer 2 and up to 4096 for Layer 3 configurations. - How does this device support network segmentation?
With 4000 VRF entries, it facilitates efficient network segmentation and management.
Product Review
The Cisco N6K-C6001-64P offers a high-density networking solution with 48 SFP+ ports at 10G speed and 4 QSFP ports, ensuring ample connectivity for demanding data center environments. With an overall throughput of 1.28 Tbps and a low latency of approximately 1 µs, it meets the needs for high-speed data transmission and minimal delay. However, its power consumption, with a typical operating power of 750W and a maximum of 1100W, might be a consideration for energy-conscious deployments.
Overview
- Up to 256,000 combined MAC addresses and ARP entries, facilitating extensive device connectivity.
- A buffer of 25 MB to manage sudden spikes in traffic, reducing packet loss and improving network performance.
- Support for up to 4096 VLANs in Layer 3 mode, enabling extensive network segmentation and security configurations.
Specifications
Model Number | N6K-C6001-64P |
Manufacturer | Cisco |
SFP+ Ports Quantity | 48 |
Speed per SFP+ Port | 10G |
QSFP Ports Quantity | 4 |
Total Switching Capacity | 1.28 Tbps |
Power Supply Units | 2 |
Fan Units | 3 |
Enclosure Type | 1 RU |
Network Latency | Approx. 1 µs |
Multicast Route Limit | 32,000 |
MAC Addresses and ARP Table Size | Up to 256,000 |
Memory Buffer | 25 MB |
Supported VLANs | Up to 4000 (L2), Up to 4096 (L3) |
Access Control List Entries | Up to 4000 |
Maximum STP Instances | 64 |
IPv4 Address Prefixes | Up to 32,000 |
IPv6 Address Prefixes | Up to 8,000 |
IPv4 Multicast Route Entries | Up to 8,000 |
IGMP Groups | Up to 8,000 |
VRF Instances | 4000 |
Average Power Consumption | 750 W |
Peak Power Consumption | 1100 W |
Power Input Range | 94 to 240 VAC |
Support for Hot Swapping | Yes |
Power Efficiency at Half Load | 94% |
Operational Temperature Range | 0 °C to 40 °C |