Skip to content
NIM-ES2-8-P

RSF Supply is not an authorized distributor. We sell Preowned Surplus and Refurbished products, all warranties are with RSF Supply and not the manufacturer. Firmware or Software is not included.

Overview

The Cisco NIM-ES2-8-P is a network interface module designed for seamless integration with Cisco 4000 Series Integrated Services Routers. This module provides eight Gigabit Ethernet ports that support both Power over Ethernet (PoE) and PoE+, making it a versatile choice for various networking applications. It is engineered to operate efficiently in environments with operating temperatures ranging from 0 °C to 40 °C and can withstand storage temperatures from -20 °C to 65 °C. The hardware's durability is further highlighted by its ability to function up to 15,000 feet above sea level. With a form factor categorized as single wide, the NIM-ES2-8-P offers a compact solution without compromising on functionality. Its dimensions are 0.8 inches in height, 6.2 inches in width, and 4.8 inches in depth, with a weight of 149 grams, making it a lightweight addition to your networking setup. The module is designed for direct module-to-module communication, enhancing its efficiency and reducing latency. This device supports Layer 2 switching at line rate, ensuring fast and reliable data transfer across the network. It is compatible with Cisco IOS-XE software, which provides advanced features and capabilities to manage and secure your network effectively. The Gigabit Ethernet ports are of the 10/100/1000 switched variety, allowing for flexible connectivity options. Key HTML bullet points highlighting the Cisco NIM-ES2-8-P's specifications include:
  • Support for up to 60 VLANs, enabling segmenting of networks into smaller, manageable groups.
  • LED indicators for link status and PoE, offering at-a-glance monitoring of network and power supply conditions.
  • Four QoS queues per port, with support for Shaped Deficit Weighted Round Robin and Intra Chassis Cascading, ensuring optimal data flow and prioritization of traffic.
The module adheres to several RFC standards, including RFC 2284, which pertains to the PPP Extensible Authentication Protocol, indicating its compliance with established protocols for secure communication. The device's resilience in various environmental conditions is highlighted by its operational relative humidity range from 10% (noncondensing) to 90% (noncondensing), allowing it to perform reliably in a wide range of climates. In conclusion, the Cisco NIM-ES2-8-P is a feature-rich network interface module that offers Gigabit Ethernet connectivity along with PoE/PoE+ capabilities. Its compact size, coupled with high performance and compatibility with Cisco IOS-XE software, makes it an excellent choice for expanding the functionality of Cisco 4000 Series Integrated Services Routers. Whether for small business networks or enterprise-level applications, this module provides the necessary tools for efficient network management and expansion.

Specs

Item NumberNIM-ES2-8-P
BrandCisco
Port Count8
Module SizeSingle Wide
Power over Ethernet SupportSupported
Operating SystemCisco IOS-XE
PerformanceFull Layer 2 Switching Capability
Port Speed10/100/1000 Mbps Auto-Sensing
Module CommunicationModule-to-Module Direct
VLAN SupportUp to 60 VLANs
Dimensions (H x W x D)0.8 x 6.2 x 4.8 inches
Mass149 grams
Standards ComplianceRFC 2284, PPP Extensible Authentication Protocol
Indicator LightsLink Activity, Power Over Ethernet
Operational Temp Range0 to 40 °C
Storage Temp Range-20 to 65 °C
Humidity for Operation10 to 90% (Non-condensing)
Maximum Altitude for Operation15,000 feet
CompatibilityCompatible with Cisco 4000 Series Integrated Services Routers
QoS Queue Count per Port4
QoS MechanismSupported
Module LinkingSupported

NIM-ES2-8-P

by Cisco
Product Line: Cisco Network Interface Modules (NIMs)
Product Type: NIM-ES2-8-P Network Interface Module
$0.00 - $514.00
$514.00
$0.00 - $514.00
$514.00
Title: Used

Orders typically ship within 1-3 Business days, if you need an item to ship sooner please contact us.

Product Description

The NIM-ES2-8-P is a single wide form factor module designed for Cisco 4000 Series Integrated Services Routers, featuring 8 Gigabit Ethernet ports supporting 10/100/1000 switching speeds and Power over Ethernet (PoE/PoE+). It operates on Cisco IOS-XE software, supports up to 60 VLANs, and offers Layer 2 switching at line rate, with capabilities such as Shaped Deficit Weighted Round Robin and Intra Chassis Cascading. The module includes direct module-to-module communication, 4 QoS queues per port, and environmental operating conditions ranging from 0 °C to 40 °C with an operating altitude up to 15,000 ft.

Key Feature for the NIM-ES2-8-P 

    

  • What is the form factor of the networking hardware?
    The form factor is Single Wide.
    • 

  • How many ports does the device have?
    This device features 8 Gigabit Ethernet ports that support 10/100/1000 switched connections.
    • 

  • Does the hardware support Power over Ethernet (PoE)?
    Yes, the device supports both PoE and PoE+.
    • 

  • What software is compatible with this hardware?
    It runs on Cisco IOS-XE software.
    • 

  • Can this device perform Layer 2 switching at line rate?
    Yes, it supports Layer 2 switching at line rate.
    • 

  • What is the maximum number of VLANs supported?
    The device can support up to 60 VLANs.
    • 

  • What are the dimensions and weight of this hardware?
    The dimensions are 0.8 in. height, 6.2 in. width, and 4.8 in. depth, with a weight of 149 g.
    • 

  • What is the operating temperature range for this device?
    The operating temperature ranges from 0 °C to 40 °C.
    • 

  • How many Quality of Service (QoS) queues does each port have?
    Each port has 4 QoS queues.
    • 

  • Is this device designed for use with any specific routers?
    Yes, it is for use with Cisco 4000 Series Integrated Services Routers.
    •

Product Review

The Cisco NIM-ES2-8-P module offers eight Gigabit Ethernet ports supporting PoE/PoE+, designed for seamless integration with Cisco 4000 Series Integrated Services Routers, enhancing flexibility and connectivity options. Despite its compact single-wide form factor, the module supports Layer 2 switching at line rate, direct module-to-module communication, and up to 60 VLANs, making it suitable for a variety of network configurations. However, its operating temperature range is limited to 0-40 °C, potentially restricting deployment in environments with extreme temperatures.

Overview

The Cisco NIM-ES2-8-P is a network interface module designed for seamless integration with Cisco 4000 Series Integrated Services Routers. This module provides eight Gigabit Ethernet ports that support both Power over Ethernet (PoE) and PoE+, making it a versatile choice for various networking applications. It is engineered to operate efficiently in environments with operating temperatures ranging from 0 °C to 40 °C and can withstand storage temperatures from -20 °C to 65 °C. The hardware's durability is further highlighted by its ability to function up to 15,000 feet above sea level. With a form factor categorized as single wide, the NIM-ES2-8-P offers a compact solution without compromising on functionality. Its dimensions are 0.8 inches in height, 6.2 inches in width, and 4.8 inches in depth, with a weight of 149 grams, making it a lightweight addition to your networking setup. The module is designed for direct module-to-module communication, enhancing its efficiency and reducing latency. This device supports Layer 2 switching at line rate, ensuring fast and reliable data transfer across the network. It is compatible with Cisco IOS-XE software, which provides advanced features and capabilities to manage and secure your network effectively. The Gigabit Ethernet ports are of the 10/100/1000 switched variety, allowing for flexible connectivity options. Key HTML bullet points highlighting the Cisco NIM-ES2-8-P's specifications include:
  • Support for up to 60 VLANs, enabling segmenting of networks into smaller, manageable groups.
  • LED indicators for link status and PoE, offering at-a-glance monitoring of network and power supply conditions.
  • Four QoS queues per port, with support for Shaped Deficit Weighted Round Robin and Intra Chassis Cascading, ensuring optimal data flow and prioritization of traffic.
The module adheres to several RFC standards, including RFC 2284, which pertains to the PPP Extensible Authentication Protocol, indicating its compliance with established protocols for secure communication. The device's resilience in various environmental conditions is highlighted by its operational relative humidity range from 10% (noncondensing) to 90% (noncondensing), allowing it to perform reliably in a wide range of climates. In conclusion, the Cisco NIM-ES2-8-P is a feature-rich network interface module that offers Gigabit Ethernet connectivity along with PoE/PoE+ capabilities. Its compact size, coupled with high performance and compatibility with Cisco IOS-XE software, makes it an excellent choice for expanding the functionality of Cisco 4000 Series Integrated Services Routers. Whether for small business networks or enterprise-level applications, this module provides the necessary tools for efficient network management and expansion.

Specifications

Item NumberNIM-ES2-8-P
BrandCisco
Port Count8
Module SizeSingle Wide
Power over Ethernet SupportSupported
Operating SystemCisco IOS-XE
PerformanceFull Layer 2 Switching Capability
Port Speed10/100/1000 Mbps Auto-Sensing
Module CommunicationModule-to-Module Direct
VLAN SupportUp to 60 VLANs
Dimensions (H x W x D)0.8 x 6.2 x 4.8 inches
Mass149 grams
Standards ComplianceRFC 2284, PPP Extensible Authentication Protocol
Indicator LightsLink Activity, Power Over Ethernet
Operational Temp Range0 to 40 °C
Storage Temp Range-20 to 65 °C
Humidity for Operation10 to 90% (Non-condensing)
Maximum Altitude for Operation15,000 feet
CompatibilityCompatible with Cisco 4000 Series Integrated Services Routers
QoS Queue Count per Port4
QoS MechanismSupported
Module LinkingSupported

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare