Skip to content
J9575A

RSF Supply is not an authorized distributor. We sell Preowned Surplus and Refurbished products, all warranties are with RSF Supply and not the manufacturer. Firmware or Software is not included.

Overview

The HP J9575A is a networking switch designed to accommodate the needs of modern businesses requiring high-speed connectivity and reliable network performance. This switch features 24 RJ-45 autosensing ports that support 10/100/1000 Mbps connections and comply with IEEE standards such as 802.3 for 10BASE-T, 802.3u for 100BASE-TX, 802.3ab for 1000BASE-T, and 802.3at for Power over Ethernet Plus (PoE+), ensuring compatibility with a wide range of network devices. The 1000BASE-T ports operate at full duplex only, maximizing data transfer rates and network efficiency. Additionally, the switch includes two fixed SFP+ ports that support 1000/10000 Mbps for high-speed connectivity and uplink capabilities. A dedicated RJ-45 serial console port is available for local management, along with an RJ-45 out-of-band management port for remote network management. The inclusion of a stacking module slot allows for the scalable integration of multiple units, enhancing network capacity and flexibility.
  • Dimensions: The HP J9575A measures 46.74 cm in width, 44.27 cm in depth, and 4.32 cm in height, fitting comfortably into a 1U rack space.
  • Weight: At 6.92 kg, it is lightweight for its class, facilitating easy installation and handling.
  • Power Efficiency: The switch comes with an HP X311 400W power supply that operates across a voltage range of 100-127/200-240 VAC, with a maximum power consumption of 127W and an idle power usage of 66W.
The switch's thermal design is optimized for efficiency with a maximum heat dissipation of 434 BTU/hr. It operates reliably in a temperature range from 0° to 55°C, with a maximum operating temperature of 45°C when transceivers are installed, ensuring stable performance under various environmental conditions. The operating relative humidity range is 15% to 95% at 40°C, non-condensing, and it can be stored in conditions ranging from -40° to 70°C and 15% to 90% relative humidity at 65°C, non-condensing. Additionally, it is designed to operate at altitudes of up to 3 km, making it suitable for deployment in a wide range of geographical locations. The HP J9575A is equipped with a J9582A fan tray, which includes one fan tray slot, contributing to the system's overall reliability and durability by providing adequate cooling. The switch's design incorporates two power supply slots, with one minimum power supply required for operation, ensuring that the network remains operational even in the event of a power supply failure. Overall, the HP J9575A offers a comprehensive feature set that supports the deployment of high-performance, resilient networks. Its combination of speed, power efficiency, and flexibility makes it an ideal choice for businesses looking to upgrade their network infrastructure.

Specs

Part NumberHP J9575A
Interface24 x 10/100/1000 Mbps auto-detecting RJ-45 ports (compliant with IEEE 802.3, 802.3u, 802.3ab, 802.3at PoE+), 1000BASE-T: only full duplex mode
Additional Ports2 x static 10G SFP+ ports, 1 x RJ-45 serial console, 1 x RJ-45 management port, 1 slot for stacking module
Width46.74 cm (18.4 inches)
Depth44.27 cm (17.43 inches)
Height4.32 cm (1.7 inches) - 1U rack unit
Weight6.92 kg (15.26 lbs)
Cooling1 x J9582A fan tray, slot for fan tray available
Power Supply2 slots for power supply, 1 x J9581A (HP X311 400W AC to DC) included, minimum 1 power supply needed
Heat Dissipation434 BTU/hr (457.87 kJ/hr)
Voltage Range100-127/200-240 V AC
Current6 A for 100-127 V, 3 A for 200-240 V
Idle Power Consumption66 W
Max Power Consumption127 W
Frequency50/60 Hz
Operating Temperature Range0° to 55°C (32° to 131°F), max 45°C with transceivers installed
Operating Humidity15% to 95% at 40°C (104°F), non-condensing
Storage Temperature-40° to 70°C (-40° to 158°F)
Storage Humidity15% to 90% at 65°C (149°F), non-condensing
Maximum AltitudeUp to 3 km (10,000 ft)

J9575A

by Hp
Product Line: HP ProCurve
Product Type: Product type: Ethernet Switch
Sold out
$0.00 - $275.00
$0.00
$0.00 - $275.00
$0.00
Title: Surplus

Orders typically ship within 1-3 Business days, if you need an item to ship sooner please contact us.

Product Description

The J9575A HP networking switch features 24 x RJ-45 autosensing 10/100/1000 ports with support for IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, and IEEE 802.3at PoE+ standards, and 2 x fixed 1000/10000 SFP+ ports for fiber connectivity. It is designed with a 1U height form factor measuring 46.74 cm in width, 44.27 cm in depth, and 4.32 cm in height, weighing 6.92 kg. This model supports a dual power supply setup with a maximum power rating of 127 W, operates efficiently between 0° to 55°C, and can withstand up to 3 km altitude, ensuring reliable performance in various environments.

Key Feature for the J9575A 

    

  • What types of ports are available on this networking device?
    
This device includes 24 RJ-45 autosensing 10/100/1000 ports, 2 fixed 1000/10000 SFP+ ports, 1 RJ-45 serial console port, 1 RJ-45 out-of-band management port, and 1 stacking module slot.
    • 


  • How does the device manage heat dissipation?
    
It uses a J9582A fan tray to dissipate up to 434 BTU/hr (457.87 kJ/hr).
    • 


  • What are the dimensions and weight of the networking hardware?
    
The dimensions are 46.74 cm width, 44.27 cm depth, and 4.32 cm height, with a weight of 6.92 kg.
    • 


  • What power supply is included, and what are its specifications?
    
The included power supply is a J9581A (HP X311 400 W 100-240 V ac to 12 V dc power supply), with a voltage range of 100-127/200-240 V ac, current of 6/3 A, idle power of 66 W, and maximum power rating of 127 W.
    • 


  • Can you detail the operating and storage environmental conditions?
    
Operating conditions range from 0° to 55°C, with a maximum temperature of 45°C when transceivers are installed. Relative humidity is 15% to 95% at 40°C, noncondensing. Storage conditions range from -40° to 70°C, with relative humidity of 15% to 90% at 65°C, noncondensing.
    • 


  • What is the maximum altitude at which the device can operate?
    
The device can operate at altitudes up to 3 km (10,000 ft).
    • 


  • How many power supply slots does the device have, and what is required for operation?
    
There are 2 power supply slots, with a minimum of one power supply required for operation.
    • 


  • What is the frequency range supported by the device's power supply?
    
The power supply supports a frequency range of 50/60 Hz.
    • 


  • Are there any specific conditions under which the device's maximum temperature should not exceed 45°C?
    
Yes, the maximum temperature should not exceed 45°C when transceivers are installed.
    • 


  • What are the supported standards for the RJ-45 autosensing ports?
    
The RJ-45 autosensing ports support IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, and IEEE 802.3at PoE+ standards.
    •

Product Review

The HP J9575A switch offers a versatile range of connectivity options, including 24 RJ-45 autosensing ports that support up to 1000BASE-T speeds and PoE+, along with two fixed 1000/10000 SFP+ ports for high-speed uplinks. However, its reliance on a single included power supply, despite having slots for two, could pose a risk for redundancy and uptime in mission-critical environments. Additionally, its operating temperature range limits to 45°C when transceivers are installed, which might restrict deployment in high-temperature settings, potentially affecting its suitability for certain operational scenarios.

Overview

The HP J9575A is a networking switch designed to accommodate the needs of modern businesses requiring high-speed connectivity and reliable network performance. This switch features 24 RJ-45 autosensing ports that support 10/100/1000 Mbps connections and comply with IEEE standards such as 802.3 for 10BASE-T, 802.3u for 100BASE-TX, 802.3ab for 1000BASE-T, and 802.3at for Power over Ethernet Plus (PoE+), ensuring compatibility with a wide range of network devices. The 1000BASE-T ports operate at full duplex only, maximizing data transfer rates and network efficiency. Additionally, the switch includes two fixed SFP+ ports that support 1000/10000 Mbps for high-speed connectivity and uplink capabilities. A dedicated RJ-45 serial console port is available for local management, along with an RJ-45 out-of-band management port for remote network management. The inclusion of a stacking module slot allows for the scalable integration of multiple units, enhancing network capacity and flexibility.
  • Dimensions: The HP J9575A measures 46.74 cm in width, 44.27 cm in depth, and 4.32 cm in height, fitting comfortably into a 1U rack space.
  • Weight: At 6.92 kg, it is lightweight for its class, facilitating easy installation and handling.
  • Power Efficiency: The switch comes with an HP X311 400W power supply that operates across a voltage range of 100-127/200-240 VAC, with a maximum power consumption of 127W and an idle power usage of 66W.
The switch's thermal design is optimized for efficiency with a maximum heat dissipation of 434 BTU/hr. It operates reliably in a temperature range from 0° to 55°C, with a maximum operating temperature of 45°C when transceivers are installed, ensuring stable performance under various environmental conditions. The operating relative humidity range is 15% to 95% at 40°C, non-condensing, and it can be stored in conditions ranging from -40° to 70°C and 15% to 90% relative humidity at 65°C, non-condensing. Additionally, it is designed to operate at altitudes of up to 3 km, making it suitable for deployment in a wide range of geographical locations. The HP J9575A is equipped with a J9582A fan tray, which includes one fan tray slot, contributing to the system's overall reliability and durability by providing adequate cooling. The switch's design incorporates two power supply slots, with one minimum power supply required for operation, ensuring that the network remains operational even in the event of a power supply failure. Overall, the HP J9575A offers a comprehensive feature set that supports the deployment of high-performance, resilient networks. Its combination of speed, power efficiency, and flexibility makes it an ideal choice for businesses looking to upgrade their network infrastructure.

Specifications

Part NumberHP J9575A
Interface24 x 10/100/1000 Mbps auto-detecting RJ-45 ports (compliant with IEEE 802.3, 802.3u, 802.3ab, 802.3at PoE+), 1000BASE-T: only full duplex mode
Additional Ports2 x static 10G SFP+ ports, 1 x RJ-45 serial console, 1 x RJ-45 management port, 1 slot for stacking module
Width46.74 cm (18.4 inches)
Depth44.27 cm (17.43 inches)
Height4.32 cm (1.7 inches) - 1U rack unit
Weight6.92 kg (15.26 lbs)
Cooling1 x J9582A fan tray, slot for fan tray available
Power Supply2 slots for power supply, 1 x J9581A (HP X311 400W AC to DC) included, minimum 1 power supply needed
Heat Dissipation434 BTU/hr (457.87 kJ/hr)
Voltage Range100-127/200-240 V AC
Current6 A for 100-127 V, 3 A for 200-240 V
Idle Power Consumption66 W
Max Power Consumption127 W
Frequency50/60 Hz
Operating Temperature Range0° to 55°C (32° to 131°F), max 45°C with transceivers installed
Operating Humidity15% to 95% at 40°C (104°F), non-condensing
Storage Temperature-40° to 70°C (-40° to 158°F)
Storage Humidity15% to 90% at 65°C (149°F), non-condensing
Maximum AltitudeUp to 3 km (10,000 ft)

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare