RSF Supply is not an authorized distributor. We sell Preowned Surplus and Refurbished products, all warranties are with RSF Supply and not the manufacturer. Firmware or Software is not included.
Overview
The HP J9582A, also known by its alternative model number 3800-48G-PoE+-4SFP+, is a high-performance switch designed to accommodate the expanding needs of modern networks. This switch comes equipped with 48 1 Gigabit Ethernet PoE+ RJ-45 network ports, providing ample connectivity for devices requiring both data and power over a single Ethernet cable. The inclusion of 4 10 Gigabit Ethernet SFP+ uplink ports ensures high-speed connectivity to the network backbone or other switches, enabling high-bandwidth applications without bottlenecks.
For management and configuration, the HP J9582A offers a console RJ-45 management port and an additional Gigabit Ethernet port for remote management capabilities. A stacking module slot is also available, allowing for the scalable expansion of network capacity and simplified management of multiple switches as a single entity.
The switch is powered by a J9580A HPE X312 1000-W power supply, included with the purchase, and supports a total Power over Ethernet (PoE) budget of 1080W. This generous PoE budget enables the switch to power numerous PoE-enabled devices such as wireless access points, VoIP phones, and IP cameras simultaneously.
Key hardware specifications of the HP J9582A include a switching capacity of 176 Gbps and a forwarding rate of 130.9 million packets per second (Mpps), indicating its capability to handle large amounts of traffic efficiently. The MAC address table supports up to 65500 entries, facilitating the management of a vast number of connected devices.
Latency is exceptionally low, at under 2.8 microseconds for 64-byte packets at 1000 Mbps, ensuring that data packets are forwarded with minimal delay. The switch also features 4 GB of flash memory and 2 GB of SDRAM, providing ample storage and processing power for network operations and configurations. Additionally, the packet buffer size is 36MB, allocated dynamically, to efficiently manage data flow and reduce congestion.
HTML bullet points highlighting key features:
- 48x 1G PoE+ RJ-45 and 4x 10G SFP+ ports for high-density connectivity and uplink capacity.
- 1080W PoE budget to support multiple PoE devices across the network.
- Switching capacity of 176 Gbps and forwarding rate of 130.9 Mpps for high-performance data processing and transmission.
Specs
| Part Number | HP J9582A |
| Product Type | 24G-PoE+-2SFP+ Switch |
| Cooling Component | Slot for fan tray |
| Power over Ethernet Ports | 48x PoE+ Gigabit Ethernet RJ-45 |
| High-Speed Uplink Ports | 4x 10G Ethernet SFP+ |
| Ports for Administration | 1x RJ-45 Console, 1x Gigabit Ethernet |
| Module Slot for Network Expansion | 1x Slot for Stacking Module |
| Other Names for Model | 3800-48G-PoE+-4SFP+ |
| Power Units Provided | 1x HPE X312 1000-W J9580A Power Supply |
| Power Over Ethernet Capability | 1080 Watts |
| Total Switching Throughput | 176 Gigabits per second |
| Data Processing Rate | 130.9 Million packets per second |
| Size of MAC Address Database | 65500 entries |
| Network Latency | < 2.8 microseconds for 64-byte packets at 1 Gbps |
| Mounting Hardware | 1-RU rack mounts included |
| Memory | 4 GB Flash, 2 GB SDRAM |
| Dynamic Packet Memory | 36 MB |
| Fixed SFP+ Ports | 4x 1000/10000 |
| Thermal Output | 635 BTU/hour (669.93 kJ/hour) |
| Electrical Input | 100-120/200-240 V AC |
| Input Current | 9.4/7.8 A |
| Operational Frequency | 50/60 Hz |
| Temperature Range for Operation | 0° to 55°C (32° to 131°F) |
| Humidity Range for Operation | 15% to 95% at 40°C (104°F), non-condensing |
J9582A
Original price
$0.00
-
Original price
$523.00
Original price
$523.00
$0.00
-
$523.00
Current price
$523.00
Orders typically ship within 1-3 Business days, if you need an item to ship sooner please contact us.
Product Description
The J9582A HP 3800-48G-PoE+-4SFP+ Switch features 48x 1 Gigabit Ethernet PoE+ RJ-45 network ports and 4x 10 Gigabit Ethernet SFP+ uplink ports, delivering a switching capacity of 176 Gbps and a forwarding rate of 130.9 Mpps. It comes equipped with a J9580A HPE X312 1000-W power supply, supporting a PoE budget of 1080W, and offers 1x stacking module slot for flexible configuration. Additional technical specifications include a MAC address table size of 65500, latency below 2.8 µs for 64-byte packets at 1000Mb, and operational efficiency with a maximum heat dissipation of 635 BTU/hr.Key Feature for the J9582A
- What is the power supply model included with the 24G-PoE+-2SFP+ Switch?
The switch includes a J9580A HPE X312 1000-W Power Supply. - How many network ports does the 3800-48G-PoE+-4SFP+ have?
It has 48x 1 Gigabit Ethernet PoE+ RJ-45 network ports. - What is the PoE budget for the 24G-PoE+-2SFP+ Switch?
The PoE budget is 1080W. - Can you detail the uplink port specifications for the 3800-48G-PoE+-4SFP+?
It features 4x 10 Gigabit Ethernet SFP+ uplink ports. - What are the management port options available on the 24G-PoE+-2SFP+ Switch?
The switch offers 1x Console RJ-45 and 1x Gigabit Ethernet management ports. - What stacking capabilities does the 3800-48G-PoE+-4SFP+ provide?
It includes 1x stacking module slot for stacking capabilities. - What is the switching capacity of the 24G-PoE+-2SFP+ Switch?
The switching capacity is 176 Gbps. - What is the MAC Address Table Size for the 3800-48G-PoE+-4SFP+?
The MAC Address Table Size is 65500. - What are the latency specifications for the 24G-PoE+-2SFP+ Switch?
The latency is < 2.8 µs for LIFO 64-byte packets at 1000Mb. - How does the 3800-48G-PoE+-4SFP+ handle heat dissipation?
The maximum heat dissipation is 635 BTU/hr (669.93 kJ/hr).
Product Review
The HP J9582A switch offers a significant PoE budget of 1080W and a high switching capacity of 176 Gbps, catering well to high-demand environments requiring substantial power and data throughput. However, its reliance on 1 Gigabit Ethernet PoE+ RJ-45 ports for network connectivity may limit bandwidth for applications necessitating higher speeds, despite the inclusion of four 10 Gigabit Ethernet SFP+ uplink ports for broader network integration. Additionally, its single power supply unit, while efficient, poses a potential single point of failure, which could be a concern for mission-critical applications requiring uninterrupted power.
Overview
The HP J9582A, also known by its alternative model number 3800-48G-PoE+-4SFP+, is a high-performance switch designed to accommodate the expanding needs of modern networks. This switch comes equipped with 48 1 Gigabit Ethernet PoE+ RJ-45 network ports, providing ample connectivity for devices requiring both data and power over a single Ethernet cable. The inclusion of 4 10 Gigabit Ethernet SFP+ uplink ports ensures high-speed connectivity to the network backbone or other switches, enabling high-bandwidth applications without bottlenecks.
For management and configuration, the HP J9582A offers a console RJ-45 management port and an additional Gigabit Ethernet port for remote management capabilities. A stacking module slot is also available, allowing for the scalable expansion of network capacity and simplified management of multiple switches as a single entity.
The switch is powered by a J9580A HPE X312 1000-W power supply, included with the purchase, and supports a total Power over Ethernet (PoE) budget of 1080W. This generous PoE budget enables the switch to power numerous PoE-enabled devices such as wireless access points, VoIP phones, and IP cameras simultaneously.
Key hardware specifications of the HP J9582A include a switching capacity of 176 Gbps and a forwarding rate of 130.9 million packets per second (Mpps), indicating its capability to handle large amounts of traffic efficiently. The MAC address table supports up to 65500 entries, facilitating the management of a vast number of connected devices.
Latency is exceptionally low, at under 2.8 microseconds for 64-byte packets at 1000 Mbps, ensuring that data packets are forwarded with minimal delay. The switch also features 4 GB of flash memory and 2 GB of SDRAM, providing ample storage and processing power for network operations and configurations. Additionally, the packet buffer size is 36MB, allocated dynamically, to efficiently manage data flow and reduce congestion.
HTML bullet points highlighting key features:
- 48x 1G PoE+ RJ-45 and 4x 10G SFP+ ports for high-density connectivity and uplink capacity.
- 1080W PoE budget to support multiple PoE devices across the network.
- Switching capacity of 176 Gbps and forwarding rate of 130.9 Mpps for high-performance data processing and transmission.
Specifications
| Part Number | HP J9582A |
| Product Type | 24G-PoE+-2SFP+ Switch |
| Cooling Component | Slot for fan tray |
| Power over Ethernet Ports | 48x PoE+ Gigabit Ethernet RJ-45 |
| High-Speed Uplink Ports | 4x 10G Ethernet SFP+ |
| Ports for Administration | 1x RJ-45 Console, 1x Gigabit Ethernet |
| Module Slot for Network Expansion | 1x Slot for Stacking Module |
| Other Names for Model | 3800-48G-PoE+-4SFP+ |
| Power Units Provided | 1x HPE X312 1000-W J9580A Power Supply |
| Power Over Ethernet Capability | 1080 Watts |
| Total Switching Throughput | 176 Gigabits per second |
| Data Processing Rate | 130.9 Million packets per second |
| Size of MAC Address Database | 65500 entries |
| Network Latency | < 2.8 microseconds for 64-byte packets at 1 Gbps |
| Mounting Hardware | 1-RU rack mounts included |
| Memory | 4 GB Flash, 2 GB SDRAM |
| Dynamic Packet Memory | 36 MB |
| Fixed SFP+ Ports | 4x 1000/10000 |
| Thermal Output | 635 BTU/hour (669.93 kJ/hour) |
| Electrical Input | 100-120/200-240 V AC |
| Input Current | 9.4/7.8 A |
| Operational Frequency | 50/60 Hz |
| Temperature Range for Operation | 0° to 55°C (32° to 131°F) |
| Humidity Range for Operation | 15% to 95% at 40°C (104°F), non-condensing |