RSF Supply is not an authorized distributor. We sell Preowned Surplus and Refurbished products, all warranties are with RSF Supply and not the manufacturer. Firmware or Software is not included.
Overview
The Ruckus ICX7150-24-2X10G is a versatile switch designed to meet the demands of modern network environments, providing a comprehensive set of features for connectivity, performance, and scalability. This switch offers 24×10/100/1000 Mbps ports, allowing for high-speed connections across all ports. Additionally, it is equipped with multiple uplink options, including 2×1 GbE RJ45 uplink-ports and 4 SFP/SFP+ ports (2×1 GbE SFP and 2×10 GbE SFP+), which are designed for both stacking and uplinks, enhancing its flexibility in network design and expansion.
The hardware is built to support basic Layer 3 networking functionalities, including static routing and RIP, enabling efficient routing between VLANs without the need for an external router. It is equipped with 1 GB of DRAM and 2 GB of NVRAM (Flash), ensuring smooth operation and ample storage for firmware and configurations. The switch's packet buffer size varies by model, with the 24-port model featuring a 2 MB buffer, optimized for maintaining high performance and reducing latency during peak loads.
Key specifications include:
- Maximum MAC addresses supported: 16,384
- Support for up to 4095 VLANs and 32 Private VLANs (PVLANs)
- Capability to handle up to 254 Spanning Tree Protocol (STP) instances, 382 Virtual Ethernet (VE) interfaces, and 4,094 ARP entries, facilitating extensive network segmentation and efficient routing.
The device also boasts impressive routing capabilities, with hardware support for up to 1,000 IPv4 and IPv6 routes each, ensuring readiness for next-generation networking. Trunking capabilities are robust, with the switch supporting up to 8 ports per trunk and a maximum of 128 trunk groups, enabling high bandwidth and network redundancy configurations.
For networks demanding high throughput for data-intensive applications, the Ruckus ICX7150-24-2X10G supports a maximum jumbo frame size of 9,216 bytes and offers 8 Quality of Service (QoS) priority queues per port, ensuring prioritization and smooth transmission of critical data across the network.
The switch is designed to operate within a temperature range of 0°C to 45°C, and can withstand 5% to 95% relative humidity at 45°C, non-condensing, ensuring reliability in various environmental conditions. Additionally, it is certified to operate at altitudes up to 10,000 feet (3,000 m) and can be stored at altitudes up to 39,000 feet (12,000 m), making it suitable for deployment in a wide range of geographical locations.
In summary, the Ruckus ICX7150-24-2X10G switch is engineered for organizations needing a scalable, high-performance networking solution. Its comprehensive mix of port types, Layer 3 capabilities, and advanced features make it an ideal choice for businesses looking to build or expand their network infrastructure with a reliable, future-proof hardware investment.
Specs
| Part Number | Ruckus ICX7150-24-2X10G |
| Manufacturer | Ruckus |
| Ports | 24×Gigabit Ethernet |
| Uplink Ports | 2×Gigabit Ethernet RJ45, 2×1G SFP, 2×10G SFP+ |
| Layer 3 Features | Static routing, RIP |
| Memory (DRAM) | 1GB |
| Storage (Flash) | 2GB |
| Packet Buffer | 2MB for 8/10/12/24 port models, 4MB for 48 port model |
| MAC Address Table Size | 16,384 entries |
| VLAN Support | Up to 4095 VLANs |
| Private VLANs | Up to 32 |
| Spanning Tree Instances | 254 |
| Virtual Ethernet Interfaces | 382 |
| ARP Entries | 4,094 |
| Routing Entries | 1,000 IPv4, 1,000 IPv6 |
| Next Hop Addresses | 4,094 |
| Link Aggregation | Up to 8 ports per group, 128 groups |
| Jumbo Frames | Up to 9,216 bytes |
| QoS Priority Queues | 8 per port |
| Min Operating Temperature | 0°C |
| Max Operating Temperature | 45°C |
| Operating Humidity | 5% to 95%, non-condensing at 45°C |
| Non-operating Humidity | 0% to 95%, non-condensing at 70°C |
| Operating Altitude | Up to 10,000 ft (3,000 m) |
| Storage Altitude | Up to 39,000 ft (12,000 m) |
ICX7150-24-2X10G
Sold out
Original price
$0.00
-
Original price
$0.00
Original price
$0.00
$0.00
-
$0.00
Current price
$0.00
Orders typically ship within 1-3 Business days, if you need an item to ship sooner please contact us.
Product Description
The ICX7150-24-2X10G offers 24×10/100/1000 Mbps ports and combines 2×1 GbE RJ45 and 2×1 GbE SFP uplink-ports with 2×10 GbE SFP+ stacking/uplink-ports for flexible network configurations. It supports basic Layer 3 capabilities, including static routing and RIP, backed by 1 GB DRAM and 2 GB NVRAM (Flash), with a packet buffer size of 2 MB for the 24-port model. This switch can handle up to 16,384 MAC addresses, 4095 VLANs, and 1,000 IPv4 and IPv6 routes, featuring 8 QoS priority queues per port and maximum jumbo frame size of 9,216 bytes, suitable for various operational conditions with operating temperatures ranging from 0°C to 45°C.FAQs for the ICX7150-24-2X10G
- What is the maximum number of MAC addresses supported?
The device supports up to 16,384 MAC addresses. - How many uplink ports are available on this device?
There are 4 uplink ports in total: 2×1 GbE RJ45 and 2×1 GbE SFP ports. - What is the maximum frame size supported for jumbo frames?
The maximum jumbo frame size supported is 9,216 bytes. - Can you detail the Layer 3 features available?
Basic Layer 3 features include static routing and RIP. - What are the operating temperature limits for this device?
The operating temperature range is from 0°C to 45°C. - How many VLANs can be configured?
Up to 4095 VLANs can be configured on this device. - What is the DRAM size?
The device is equipped with 1 GB of DRAM. - Describe the trunking capabilities of this device.
The device can have up to 8 ports per trunk and supports a maximum of 128 trunk groups. - What is the maximum operating altitude?
The device can operate at up to 10,000 feet (3,000 meters) maximum altitude. - How many priority queues does each port have for QoS?
There are 8 QoS priority queues available per port.
Product Review
The Ruckus ICX7150-24-2X10G switch offers a solid range of connectivity options, including 24 Gigabit Ethernet ports and 4 uplink ports with both 1GbE and 10GbE capabilities, catering well to varied networking demands. However, its basic Layer 3 features, limited to static routing and RIP, might not meet the requirements of networks needing advanced routing functionalities. Additionally, with 1 GB of DRAM and 2 GB of flash memory, it provides adequate but not exceptional capacity for handling modern network loads, potentially affecting performance in high-demand scenarios.
Overview
The Ruckus ICX7150-24-2X10G is a versatile switch designed to meet the demands of modern network environments, providing a comprehensive set of features for connectivity, performance, and scalability. This switch offers 24×10/100/1000 Mbps ports, allowing for high-speed connections across all ports. Additionally, it is equipped with multiple uplink options, including 2×1 GbE RJ45 uplink-ports and 4 SFP/SFP+ ports (2×1 GbE SFP and 2×10 GbE SFP+), which are designed for both stacking and uplinks, enhancing its flexibility in network design and expansion.
The hardware is built to support basic Layer 3 networking functionalities, including static routing and RIP, enabling efficient routing between VLANs without the need for an external router. It is equipped with 1 GB of DRAM and 2 GB of NVRAM (Flash), ensuring smooth operation and ample storage for firmware and configurations. The switch's packet buffer size varies by model, with the 24-port model featuring a 2 MB buffer, optimized for maintaining high performance and reducing latency during peak loads.
Key specifications include:
- Maximum MAC addresses supported: 16,384
- Support for up to 4095 VLANs and 32 Private VLANs (PVLANs)
- Capability to handle up to 254 Spanning Tree Protocol (STP) instances, 382 Virtual Ethernet (VE) interfaces, and 4,094 ARP entries, facilitating extensive network segmentation and efficient routing.
The device also boasts impressive routing capabilities, with hardware support for up to 1,000 IPv4 and IPv6 routes each, ensuring readiness for next-generation networking. Trunking capabilities are robust, with the switch supporting up to 8 ports per trunk and a maximum of 128 trunk groups, enabling high bandwidth and network redundancy configurations.
For networks demanding high throughput for data-intensive applications, the Ruckus ICX7150-24-2X10G supports a maximum jumbo frame size of 9,216 bytes and offers 8 Quality of Service (QoS) priority queues per port, ensuring prioritization and smooth transmission of critical data across the network.
The switch is designed to operate within a temperature range of 0°C to 45°C, and can withstand 5% to 95% relative humidity at 45°C, non-condensing, ensuring reliability in various environmental conditions. Additionally, it is certified to operate at altitudes up to 10,000 feet (3,000 m) and can be stored at altitudes up to 39,000 feet (12,000 m), making it suitable for deployment in a wide range of geographical locations.
In summary, the Ruckus ICX7150-24-2X10G switch is engineered for organizations needing a scalable, high-performance networking solution. Its comprehensive mix of port types, Layer 3 capabilities, and advanced features make it an ideal choice for businesses looking to build or expand their network infrastructure with a reliable, future-proof hardware investment.
Specifications
| Part Number | Ruckus ICX7150-24-2X10G |
| Manufacturer | Ruckus |
| Ports | 24×Gigabit Ethernet |
| Uplink Ports | 2×Gigabit Ethernet RJ45, 2×1G SFP, 2×10G SFP+ |
| Layer 3 Features | Static routing, RIP |
| Memory (DRAM) | 1GB |
| Storage (Flash) | 2GB |
| Packet Buffer | 2MB for 8/10/12/24 port models, 4MB for 48 port model |
| MAC Address Table Size | 16,384 entries |
| VLAN Support | Up to 4095 VLANs |
| Private VLANs | Up to 32 |
| Spanning Tree Instances | 254 |
| Virtual Ethernet Interfaces | 382 |
| ARP Entries | 4,094 |
| Routing Entries | 1,000 IPv4, 1,000 IPv6 |
| Next Hop Addresses | 4,094 |
| Link Aggregation | Up to 8 ports per group, 128 groups |
| Jumbo Frames | Up to 9,216 bytes |
| QoS Priority Queues | 8 per port |
| Min Operating Temperature | 0°C |
| Max Operating Temperature | 45°C |
| Operating Humidity | 5% to 95%, non-condensing at 45°C |
| Non-operating Humidity | 0% to 95%, non-condensing at 70°C |
| Operating Altitude | Up to 10,000 ft (3,000 m) |
| Storage Altitude | Up to 39,000 ft (12,000 m) |