The Ruckus ICX7150-48-4X1G is a versatile switch designed for a wide range of environments, from small to medium-sized enterprises to larger campuses. This switch features 48 10/100/1000 Mbps ports for high-speed data transfer and connectivity. Additionally, it includes 2 1 GbE RJ45 uplink ports and 4 1 GbE SFP uplink ports. These uplink ports can be upgraded to 4 10 GbE SFP+ with a license, providing a clear path for network expansion and increased bandwidth needs. Key to the ICX7150-48-4X1G's operation is its capacity for basic Layer 3 networking, including static routing and RIP. This allows for efficient routing of traffic within the network, improving performance and reducing latency. The switch is equipped with 1 GB of DRAM and 2 GB of NVRAM (Flash), ensuring smooth operation and sufficient space for firmware and configuration files. The packet buffer size for the 48-port model is 4 MB, allowing for efficient handling of data packets and reducing the chance of congestion and packet loss.

• Maximum MAC addresses supported by the device are 16,384, enabling a large number of devices to connect without conflicts.
• It supports up to 4095 VLANs and 32 Private VLANs (PVLANs), offering extensive network segmentation capabilities and enhanced security.
• The switch can handle up to 254 Spanning Tree Protocol (STP) instances, 382 Virtual Ethernet (VE) interfaces, and has a capacity for 4,094 ARP entries, making it suitable for networks with complex routing and switching needs.

For network administrators looking to optimize their network's performance, the ICX7150-48-4X1G supports up to 1,000 IPv4 and 1,000 IPv6 routes in hardware, with the ability to handle 4,094 next-hop addresses. This capability ensures efficient route processing and scalability for growing network demands. Trunking features include support for up to 8 ports per trunk and 128 trunk groups, enhancing link aggregation and redundancy. The maximum jumbo frame size of 9,216 bytes allows for the efficient transmission of large data packets, reducing overhead and improving network performance. Quality of Service (QoS) is a priority with 8 priority queues per port, ensuring that critical network traffic is prioritized and that bandwidth is allocated efficiently. The operating temperature range of the switch is from 0°C to 45°C, with an operating relative humidity of 5% to 95% at 45°C, non-condensing. This ensures that the switch can operate reliably in a wide range of environmental conditions. It is also designed to operate at altitudes of up to 10,000 ft (3,000 m) and can be stored at altitudes up to 39,000 ft (12,000 m), making it suitable for deployment in varied geographical locations. In summary, the Ruckus ICX7150-48-4X1G switch offers a comprehensive set of features and capabilities for efficient network operation and expansion. With a wide array of port configurations, Layer 3 features, and scalability options, it is well-suited to meet the needs of a diverse range of network environments.

Part Number and Manufacturer	Ruckus ICX7150-48-4X1G
Ports	48×10/100/1000 Mbps Ethernet ports
Uplink Ports - RJ45	2×1 GbE
Uplink Ports - SFP	4×1 GbE, expandable to 4×10 GbE SFP+ with additional licensing
Layer 3 Features	Static routing and RIP supported
DRAM	1 GB
NVRAM (Flash Memory)	2 GB
Packet Buffer Size	2 MB for 8/10/12/24 port models, 4 MB for 48 port model
Maximum MAC Addresses	16,384
Maximum VLANs	4095
Maximum Private VLANs	32
Maximum Spanning Tree Instances	254
Maximum Virtual Ethernet (VE) Interfaces	382
Maximum ARP Entries	4,094
Maximum Hardware Routes	1,000 IPv4, 1,000 IPv6
Next Hop Addresses Supported	4,094
Trunking - Ports per Trunk	8
Trunking - Maximum Trunk Groups	128
Maximum Jumbo Frame Size	9,216 bytes
Quality of Service (QoS) Priority Queues	8 per port
Minimum Operating Temperature	0°C
Maximum Operating Temperature	45°C
Operating Relative Humidity	5% to 95% non-condensing at 45°C
Non-Operating Relative Humidity	0% to 95% non-condensing at 70°C
Maximum Operating Altitude	10,000 ft (3,000 m)
Maximum Storage Altitude	39,000 ft (12,000 m)