Skip to content
DPCE-R-4XGE-XFP

RSF Supply is not an authorized distributor. We sell Preowned Surplus and Refurbished products, all warranties are with RSF Supply and not the manufacturer. Firmware or Software is not included.

Overview

The Juniper DPCE-R-4XGE-XFP is a high-performance network interface card designed for Juniper routers, providing advanced networking capabilities and enhancing overall system performance. This card is equipped with four 10-Gigabit Ethernet ports, each capable of operating at speeds up to 10 Gbps, ensuring high-speed data transmission and efficient network operations. It supports both WAN-PHY mode at 9.953 Gbps and LAN-PHY mode at 10.3125 Gbps, offering flexibility in network configurations and optimizing connectivity according to specific network requirements. With a system capacity of 480 Gbps and a throughput per slot of 120 Gbps, the DPCE-R-4XGE-XFP significantly boosts the data handling capabilities of the network infrastructure. Its packet forwarding capacity of 360 Mpps (million packets per second) enables the swift and reliable transfer of data packets across the network, minimizing latency and improving the quality of service. The card is designed to fit into either 2 or 3 DPCs (Dense Port Concentrators) and/or MPCs (Modular Port Concentrators) per chassis, depending on the network's scale and the chassis's configuration, providing a scalable solution that meets the evolving needs of modern networks. The DPCE-R-4XGE-XFP operates efficiently under a wide range of environmental conditions. It requires a power supply of 6.46 A @ 48 V (310 W) and has a weight of 13.1 lb (5.9 kg), making it a power-efficient and relatively lightweight addition to any networking setup. It supports full-duplex mode, allowing simultaneous two-way data transmission and maximizing bandwidth utilization. The card also supports maximum transmission units (MTUs) of up to 9192 bytes, accommodating large data packets and reducing the need for packet fragmentation in high-performance networking environments. Key features include: -
  • Four 10-Gigabit Ethernet ports for high-speed connectivity
  • Support for both WAN-PHY and LAN-PHY modes, offering flexibility in network deployment
  • Full-duplex mode and support for large MTUs, enhancing data transmission efficiency
Designed to deliver exceptional performance and scalability, especially in Layer 2 features, the DPCE-R-4XGE-XFP meets the demands of intensive data center and enterprise networking environments. It operates within a temperature range of 32° F to 104° F and can function in relative humidity levels ranging from 5% to 90% non-condensing. This ensures reliable performance across various operating conditions without performance degradation. Additionally, it is designed to operate effectively at altitudes from 0 ft to 13,000 ft (0 m to 4,000 m), offering versatility for deployment in different geographical locations. In conclusion, the Juniper DPCE-R-4XGE-XFP is a powerful and flexible network interface card that significantly enhances the capabilities of Juniper routers. Its advanced features, including high-speed 10-Gigabit Ethernet ports, support for WAN-PHY and LAN-PHY modes, and high packet forwarding capacity, make it an ideal solution for networks requiring high throughput, low latency, and scalability. Whether deployed in data centers, enterprise networks, or carrier environments, the DPCE-R-4XGE-XFP delivers the performance and reliability needed to support the most demanding network applications.

Specs

Part Number Juniper DPCE-R-4XGE-XFP
Manufacturer Juniper
10 GbE Ports 4, Layer 2/3 Support
Total System Throughput 480 Gigabits per second
Throughput per Expansion Slot 120 Gigabits per second
Packet Forwarding Rate 360 Million packets per second
DPC/MPC Slots per Chassis 2 to 3
Number of 10GbE Ports Four
Power Consumption 310 Watts (6.46 Amps @ 48 Volts)
Unit Weight 5.9 kilograms (13.1 pounds)
Port Speed Capability Up to 10 Gbps per port
WAN Interface Speed 9.953 Gbps
LAN Interface Speed 10.3125 Gbps
Transmission Mode Full-duplex
Maximum MTU Support Up to 9192 bytes
Layer 2 Performance and Expansion Enhanced
Minimum Operating Temperature 0°C (32°F)
Maximum Operating Temperature 40°C (104°F)
Minimum Operating Humidity 5% (non-condensing)
Maximum Operating Humidity 90% (non-condensing)
Lowest Operating Altitude 0 meters (0 feet)
Highest Operating Altitude 4,000 meters (13,000 feet)

DPCE-R-4XGE-XFP

by Juniper
Product Line: Juniper DPCE Series
Product Type: Network line card
$0.00 - $235.00
$235.00
$0.00 - $235.00
$235.00
Title: Used

Orders typically ship within 1-3 Business days, if you need an item to ship sooner please contact us.

Product Description

The DPCE-R-4XGE-XFP module features four 10-Gigabit Ethernet ports, each capable of operating at speeds up to 10 Gbps, with options for WAN-PHY mode at 9.953 Gbps and LAN-PHY mode at 10.3125 Gbps. It supports a system capacity of 480 Gbps, a throughput per slot of 120 Gbps, and a packet forwarding capacity of 360 Mpps, accommodating DPCs and/or MPCs per chassis 2 or 3. Designed for efficiency, it operates within a temperature range of 32° F to 104° F, humidity levels from 5% to 90% noncondensing, and altitudes up to 13,000 ft without performance degradation, requiring 6.46 A @ 48 V (310 W) power, and weighs 13.1 lb (5.9 kg).

Key Feature for the DPCE-R-4XGE-XFP 

    

  • What is the system capacity of the 4x10 GbE L2/L3 capable switch?
    The system capacity is 480 Gbps.
    • 

  • How many DPCs and/or MPCs can the chassis support?
    The chassis supports 2 or 3 DPCs and/or MPCs.
    • 

  • What is the maximum throughput per slot for this device?
    Throughput per slot is 120 Gbps.
    • 

  • Can you detail the power requirements for the 4x10 GbE L2/L3 capable switch?
    It requires 6.46 A @ 48 V, totaling 310 W.
    • 

  • What are the packet forwarding capacities of this network switch?
    The packet forwarding capacity is 360 Mpps.
    • 

  • What weight does the 4x10 GbE L2/L3 capable switch have?
    The weight is 13.1 lb (5.9 kg).
    • 

  • What speeds can each port of the 4x10 GbE L2/L3 capable switch achieve?
    Each port can achieve speeds up to 10 Gbps, with WAN-PHY mode at 9.953 Gbps and LAN-PHY mode at 10.3125 Gbps.
    • 

  • What is the maximum transmission unit (MTU) size supported by this device?
    The maximum transmission unit (MTU) size supported is up to 9192 bytes.
    • 

  • What are the operating temperature ranges for the 4x10 GbE L2/L3 capable switch?
    The operating temperature ranges from a minimum of 32° F to a maximum of 104° F.
    • 

  • How does altitude affect the performance of the 4x10 GbE L2/L3 capable switch?
    There is no performance degradation from 0 ft / 0 m up to 13,000 ft / 4,000 m.
    •

Product Review

The Juniper DPCE-R-4XGE-XFP module delivers high performance with four 10-Gigabit Ethernet ports capable of up to 10 Gbps each, supporting both WAN-PHY and LAN-PHY modes, and ensuring versatility for various networking requirements. However, its power consumption at 310W and a weight of 13.1 lb (5.9 kg) may present challenges for energy efficiency and physical infrastructure, especially in densely populated racks. Additionally, while offering impressive packet forwarding capacity of 360 Mpps and scalability with system capacity up to 480 Gbps, considerations for environmental conditions are critical, given its operational temperature and humidity ranges.

Overview

The Juniper DPCE-R-4XGE-XFP is a high-performance network interface card designed for Juniper routers, providing advanced networking capabilities and enhancing overall system performance. This card is equipped with four 10-Gigabit Ethernet ports, each capable of operating at speeds up to 10 Gbps, ensuring high-speed data transmission and efficient network operations. It supports both WAN-PHY mode at 9.953 Gbps and LAN-PHY mode at 10.3125 Gbps, offering flexibility in network configurations and optimizing connectivity according to specific network requirements. With a system capacity of 480 Gbps and a throughput per slot of 120 Gbps, the DPCE-R-4XGE-XFP significantly boosts the data handling capabilities of the network infrastructure. Its packet forwarding capacity of 360 Mpps (million packets per second) enables the swift and reliable transfer of data packets across the network, minimizing latency and improving the quality of service. The card is designed to fit into either 2 or 3 DPCs (Dense Port Concentrators) and/or MPCs (Modular Port Concentrators) per chassis, depending on the network's scale and the chassis's configuration, providing a scalable solution that meets the evolving needs of modern networks. The DPCE-R-4XGE-XFP operates efficiently under a wide range of environmental conditions. It requires a power supply of 6.46 A @ 48 V (310 W) and has a weight of 13.1 lb (5.9 kg), making it a power-efficient and relatively lightweight addition to any networking setup. It supports full-duplex mode, allowing simultaneous two-way data transmission and maximizing bandwidth utilization. The card also supports maximum transmission units (MTUs) of up to 9192 bytes, accommodating large data packets and reducing the need for packet fragmentation in high-performance networking environments. Key features include: -
  • Four 10-Gigabit Ethernet ports for high-speed connectivity
  • Support for both WAN-PHY and LAN-PHY modes, offering flexibility in network deployment
  • Full-duplex mode and support for large MTUs, enhancing data transmission efficiency
Designed to deliver exceptional performance and scalability, especially in Layer 2 features, the DPCE-R-4XGE-XFP meets the demands of intensive data center and enterprise networking environments. It operates within a temperature range of 32° F to 104° F and can function in relative humidity levels ranging from 5% to 90% non-condensing. This ensures reliable performance across various operating conditions without performance degradation. Additionally, it is designed to operate effectively at altitudes from 0 ft to 13,000 ft (0 m to 4,000 m), offering versatility for deployment in different geographical locations. In conclusion, the Juniper DPCE-R-4XGE-XFP is a powerful and flexible network interface card that significantly enhances the capabilities of Juniper routers. Its advanced features, including high-speed 10-Gigabit Ethernet ports, support for WAN-PHY and LAN-PHY modes, and high packet forwarding capacity, make it an ideal solution for networks requiring high throughput, low latency, and scalability. Whether deployed in data centers, enterprise networks, or carrier environments, the DPCE-R-4XGE-XFP delivers the performance and reliability needed to support the most demanding network applications.

Specifications

Part Number Juniper DPCE-R-4XGE-XFP
Manufacturer Juniper
10 GbE Ports 4, Layer 2/3 Support
Total System Throughput 480 Gigabits per second
Throughput per Expansion Slot 120 Gigabits per second
Packet Forwarding Rate 360 Million packets per second
DPC/MPC Slots per Chassis 2 to 3
Number of 10GbE Ports Four
Power Consumption 310 Watts (6.46 Amps @ 48 Volts)
Unit Weight 5.9 kilograms (13.1 pounds)
Port Speed Capability Up to 10 Gbps per port
WAN Interface Speed 9.953 Gbps
LAN Interface Speed 10.3125 Gbps
Transmission Mode Full-duplex
Maximum MTU Support Up to 9192 bytes
Layer 2 Performance and Expansion Enhanced
Minimum Operating Temperature 0°C (32°F)
Maximum Operating Temperature 40°C (104°F)
Minimum Operating Humidity 5% (non-condensing)
Maximum Operating Humidity 90% (non-condensing)
Lowest Operating Altitude 0 meters (0 feet)
Highest Operating Altitude 4,000 meters (13,000 feet)

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare