RSF Supply is not an authorized distributor. We sell Preowned Surplus and Refurbished products, all warranties are with RSF Supply and not the manufacturer. Firmware or Software is not included.
Overview
The Juniper PB-8GE-TYPE2-SFP-IQ2 is a high-capacity network interface card designed to provide secure and high-speed Gigabit Ethernet connectivity for enterprise networks. This card is equipped with eight ports that support Gigabit Ethernet Type 2 IQ2 PIC, enabling efficient data handling and network management. It is engineered to meet the demands of high-performance networking, offering a maximum data transfer rate of 1 Gbit/s with the capability to handle large volumes of traffic with its support for up to 2:1 oversubscription. This requires the use of SFP modules to facilitate various network connection standards, including optical and copper links.
The physical dimensions of the PB-8GE-TYPE2-SFP-IQ2 are compact, with a width of 4 inches, a height of 1 inch, and a depth of 7 inches, making it suitable for installation in various network environments without requiring excessive space. The device is designed for durability and long-term reliability, with a Mean Time Between Failures (MTBF) of 200,000 hours, ensuring consistent performance over its lifespan.
In terms of connectivity, this card offers flexibility through its eight total expansion slots, all of which are SFP (mini-GBIC) slots. These slots allow for a wide range of network connections, including both optical and copper interfaces. The optical connections utilize LC/PC connectors, while copper connections are facilitated through RJ-45 connectors using four-pair, Category 5 shielded twisted-pair cables.
The card's power requirements are modest, needing only 0.89 A at 48 V (42.5 W) for the 8-port Type 2 configuration, ensuring efficient power consumption. It boasts high-performance throughput on each port, with speeds up to 4 Gbps in full-duplex mode. This allows for the rapid transmission of data across the network, reducing bottlenecks and improving overall network efficiency.
- Supports large maximum transmission units (MTUs) of up to 9192 bytes, facilitating the transfer of large data packets and improving network performance.
- Features a 20 Gbps throughput, enhancing the card's ability to handle high volumes of network traffic seamlessly.
- Includes 64 source MAC address filters and 960 destination MAC filters, providing advanced network security and traffic management capabilities.
Specs
| Part Number | Juniper PB-8GE-TYPE2-SFP-IQ2 |
| Producer | Juniper |
| Description | 8-port Gigabit Ethernet IQ2 PIC, Type 2, supports up to 50% oversubscription; requires SFP modules. |
| Bandwidth Capability | 2 Gbps Gigabit Ethernet |
| Width | 4 inches |
| Elevation | 1 inch |
| Length | 7 inches |
| Lifespan Expectancy (MTBF) | 200,000 hours |
| Peak Data Transfer Speed | 1 Gbps |
| Total Number of Expansion Bays | 8 |
| Expansion Bay Interface | SFP (mini-GBIC) |
| Energy Consumption | Type 2: 0.89 A at 48 V (42.5 W), Type 3: 1.25 A at 48 V (60 W) |
| Port Performance | 8-port SFP: up to 4 Gbps |
| Transmission Mode | Full-duplex |
| Maximum MTU | Up to 9192 bytes |
| Model Type | Gigabit Ethernet Enhanced IQ2 (IQ2E) PIC with SFP |
| Connection Types | Optical: LC/PC, Copper: RJ-45 |
| Supported Cabling | Four-pair, CAT5, shielded twisted-pair |
| System Throughput | 20 Gbps |
| Supported Standard | 1000Base-T (model: SFP-1GE-T) |
| Source MAC Address Filtering | 64 filters |
| Destination MAC Filtering | 960 filters |
PB-8GE-TYPE2-SFP-IQ2
Original price
$0.00
-
Original price
$871.00
Original price
$871.00
$0.00
-
$871.00
Current price
$871.00
Orders typically ship within 1-3 Business days, if you need an item to ship sooner please contact us.
Product Description
The PB-8GE-TYPE2-SFP-IQ2 is a Juniper 8-port Gigabit Ethernet Type 2 IQ2 PIC, featuring 2:1 oversubscription and requiring SFP modules for connectivity. It offers a data transfer rate of up to 2 Gbps and supports large MTUs of up to 9192 bytes, ensuring efficient data transmission across networks. This module is designed with 20 Gbps throughput, 64 source MAC address filters, and 960 destination MAC filters, enhancing its capability to manage network traffic effectively.Key Feature for the PB-8GE-TYPE2-SFP-IQ2
- What is the data transfer rate of the 8-port Gigabit Ethernet Type 2 IQ2 PIC?
The data transfer rate is 2 Gbps for Gigabit Ethernet. - How many total expansion slots does the Type 2 Gigabit Ethernet Enhanced IQ2 (IQ2E) PIC with SFP have?
It has 8 total expansion slots. - What type of expansion slots are available on this device?
The device supports SFP (mini-GBIC) expansion slots. - What are the power requirements for the 8-port (Type 2) configuration?
The power requirement for the 8-port (Type 2) is 0.89 A @ 48 V (42.5 W). - Can you describe the physical dimensions of the Type 2 IQ2 PIC?
The dimensions are a width of 4 inches, a height of 1 inch, and a depth of 7 inches. - What is the MTBF (Mean Time Between Failures) for this module?
The MTBF is 200,000 hours. - Does the Type 2 IQ2 PIC support full-duplex mode?
Yes, it supports full-duplex mode. - What is the maximum data transfer rate supported by this device?
The maximum data transfer rate supported is 1 Gbit/s. - What are the connectivity options for the Type 2 IQ2 PIC?
Connectivity options include optical (LC/PC) and copper (RJ-45) with four-pair, Category 5 shielded twisted-pair connectivity. - What are the MAC address filter capacities for the Type 2 IQ2 PIC?
It can filter up to 64 source MAC addresses and 960 destination MAC addresses.
Product Review
The Juniper PB-8GE-TYPE2-SFP-IQ2 offers a satisfactory balance between performance and scalability, supporting 2:1 oversubscription and requiring SFP modules which allows for flexible network configurations. With a MTBF of 200,000 hours, it promises reliability, but the power requirement of 0.89 A at 48 V (42.5 W) for the 8-port configuration may be a consideration for energy-conscious deployments. However, its capability to support high-performance throughput of up to 4 Gbps per port and large MTUs up to 9192 bytes positions it as a viable option for environments demanding high data rates and extensive data transmission sizes.
Overview
The Juniper PB-8GE-TYPE2-SFP-IQ2 is a high-capacity network interface card designed to provide secure and high-speed Gigabit Ethernet connectivity for enterprise networks. This card is equipped with eight ports that support Gigabit Ethernet Type 2 IQ2 PIC, enabling efficient data handling and network management. It is engineered to meet the demands of high-performance networking, offering a maximum data transfer rate of 1 Gbit/s with the capability to handle large volumes of traffic with its support for up to 2:1 oversubscription. This requires the use of SFP modules to facilitate various network connection standards, including optical and copper links.
The physical dimensions of the PB-8GE-TYPE2-SFP-IQ2 are compact, with a width of 4 inches, a height of 1 inch, and a depth of 7 inches, making it suitable for installation in various network environments without requiring excessive space. The device is designed for durability and long-term reliability, with a Mean Time Between Failures (MTBF) of 200,000 hours, ensuring consistent performance over its lifespan.
In terms of connectivity, this card offers flexibility through its eight total expansion slots, all of which are SFP (mini-GBIC) slots. These slots allow for a wide range of network connections, including both optical and copper interfaces. The optical connections utilize LC/PC connectors, while copper connections are facilitated through RJ-45 connectors using four-pair, Category 5 shielded twisted-pair cables.
The card's power requirements are modest, needing only 0.89 A at 48 V (42.5 W) for the 8-port Type 2 configuration, ensuring efficient power consumption. It boasts high-performance throughput on each port, with speeds up to 4 Gbps in full-duplex mode. This allows for the rapid transmission of data across the network, reducing bottlenecks and improving overall network efficiency.
- Supports large maximum transmission units (MTUs) of up to 9192 bytes, facilitating the transfer of large data packets and improving network performance.
- Features a 20 Gbps throughput, enhancing the card's ability to handle high volumes of network traffic seamlessly.
- Includes 64 source MAC address filters and 960 destination MAC filters, providing advanced network security and traffic management capabilities.
Specifications
| Part Number | Juniper PB-8GE-TYPE2-SFP-IQ2 |
| Producer | Juniper |
| Description | 8-port Gigabit Ethernet IQ2 PIC, Type 2, supports up to 50% oversubscription; requires SFP modules. |
| Bandwidth Capability | 2 Gbps Gigabit Ethernet |
| Width | 4 inches |
| Elevation | 1 inch |
| Length | 7 inches |
| Lifespan Expectancy (MTBF) | 200,000 hours |
| Peak Data Transfer Speed | 1 Gbps |
| Total Number of Expansion Bays | 8 |
| Expansion Bay Interface | SFP (mini-GBIC) |
| Energy Consumption | Type 2: 0.89 A at 48 V (42.5 W), Type 3: 1.25 A at 48 V (60 W) |
| Port Performance | 8-port SFP: up to 4 Gbps |
| Transmission Mode | Full-duplex |
| Maximum MTU | Up to 9192 bytes |
| Model Type | Gigabit Ethernet Enhanced IQ2 (IQ2E) PIC with SFP |
| Connection Types | Optical: LC/PC, Copper: RJ-45 |
| Supported Cabling | Four-pair, CAT5, shielded twisted-pair |
| System Throughput | 20 Gbps |
| Supported Standard | 1000Base-T (model: SFP-1GE-T) |
| Source MAC Address Filtering | 64 filters |
| Destination MAC Filtering | 960 filters |