RSF Supply is not an authorized distributor. We sell Preowned Surplus and Refurbished products, all warranties are with RSF Supply and not the manufacturer. Firmware or Software is not included.
Overview
The Juniper PC-1XGE-TYPE3-XFP-IQ2E is a high-capacity network interface card designed to meet the demands of modern, high-speed networks. It is equipped with a single 10-Gigabit Ethernet port that supports both WAN-PHY and LAN-PHY modes, allowing for flexible deployment across various network architectures. The card is designed for use with optical connections, featuring an LC connector type and compatibility with XFP transceivers.
This network interface card is engineered to deliver exceptional performance with a throughput capacity that matches the requirements of enterprises and service providers alike. In WAN-PHY mode, the card operates at a speed of 9.953 Gbps, while in LAN-PHY mode, it can reach speeds of up to 10.3125 Gbps. This dual-mode functionality ensures that the card can be seamlessly integrated into a wide range of network environments. Additionally, the card operates in full-duplex mode, enabling simultaneous two-way data transmission and increasing the efficiency of data flow across the network.
One of the standout features of the PC-1XGE-TYPE3-XFP-IQ2E is its support for large maximum transmission units (MTUs) of up to 9192 bytes. This capability allows for the efficient handling of large data packets, reducing the need for packet fragmentation and improving overall network performance.
The hardware specifications reveal a device that is not only powerful but also designed with scalability and reliability in mind:
- Power requirements are modest at 1.2 A @48 V (56 W), ensuring that the card's operation is energy-efficient.
- The card's design allows for its deployment in environments with up to 90% humidity and at altitudes as high as 10,000 feet, offering versatility in various operating conditions.
- With a capacity to support up to 80 1GbE and 80 10GbE connections, the card is capable of handling significant network loads.
- It also supports up to 16 10GbE DWDM and 4 100GbE DWDM connections, providing ample bandwidth for data-intensive applications.
- The system's overall capacity of 1.92 Tbps, combined with 64 GB of DDR4 RAM, ensures that the card can manage extensive data flows, making it suitable for the core of any high-performance network.
The PC-1XGE-TYPE3-XFP-IQ2E is designed for installation in systems that require high-density networking hardware. It occupies 5 rack units, with the ability to fit 9 systems per rack. Each system supports 2 MPCs, with a per-slot capacity of 480 Gbps, contributing to the card's high system capacity.
In summary, the Juniper PC-1XGE-TYPE3-XFP-IQ2E is a powerful network interface card that offers:
- A 10-Gigabit Ethernet port with support for large MTUs.
- Flexible WAN-PHY and LAN-PHY operating modes.
- High system capacity and performance for demanding network environments.
With its combination of performance, flexibility, and capacity, this card is an excellent choice for organizations looking to upgrade their network infrastructure to support high-speed, high-volume data transmission.
Specs
| Item Number | Juniper PC-1XGE-TYPE3-XFP-IQ2E |
| Producer | Juniper |
| Interface | 10-Gigabit Ethernet IQ2E, Single-port XFP |
| Connector Type | Optical: LC |
| Port Count | One 10-Gigabit Ethernet Port |
| Energy Consumption | 1.2 A @48 V (56 W) |
| Data Rate | Throughput for high-demand applications |
| WAN Interface Speed | 9.953 Gbps (WAN-PHY) |
| LAN Interface Speed | 10.3125 Gbps (LAN-PHY) |
| Communication Mode | Full-duplex |
| Maximum Packet Size | Up to 9192 bytes |
| Enclosure Size | 5 Rack Units |
| Max Units Per Rack | 9 Systems |
| Slot Capacity | 2 MPCs, 480 Gbps each |
| Total Bandwidth | 1.92 Terabits per second |
| Humidity Range for Operation | 5% to 90% |
| Operational Altitude Limit | Up to 10,000 feet (3048 meters) |
| 1GbE Ports Maximum | 80 Ports |
| 10GbE Ports Maximum | 80 Ports |
| Dense Wavelength-Division Multiplexing 10GbE | 16 Channels |
| Dense Wavelength-Division Multiplexing 100GbE | 4 Channels |
| Memory | 64 GB DDR4 RAM |
PC-1XGE-TYPE3-XFP-IQ2E
Sold out
Original price
$0.00
-
Original price
$503.00
Original price
$0.00
$0.00
-
$503.00
Current price
$0.00
Orders typically ship within 1-3 Business days, if you need an item to ship sooner please contact us.
Product Description
The PC-1XGE-TYPE3-XFP-IQ2E Juniper module delivers high-performance networking with a 10-Gigabit Ethernet IQ2E interface and a single 1-port XFP with optical LC connectivity. It supports both WAN-PHY mode at 9.953 Gbps and LAN-PHY mode at 10.3125 Gbps, accommodating large MTUs of up to 9192 bytes. This module requires 1.2 A @48 V (56 W) power, supports full-duplex mode for maximum throughput, and is designed for systems with a capacity of 1.92 Tbps and 64 GB of DDR4 RAM, ensuring efficient operation in environments up to 10,000 ft altitude.Key Feature for the PC-1XGE-TYPE3-XFP-IQ2E
- What is the purpose of the 10-Gigabit Ethernet IQ2E module?
- The 10-Gigabit Ethernet IQ2E module provides a 10-Gigabit Ethernet connectivity option for networks, supporting both WAN-PHY at 9.953 Gbps and LAN-PHY at 10.3125 Gbps modes, and is designed for high-performance throughput with a large MTU of up to 9192 bytes.
- What type of optical connection does it use?
- The module utilizes an LC optical connection type.
- How many ports does the module have, and what is their speed?
- It has one 10-Gigabit Ethernet port capable of operating in full-duplex mode for high-speed data transfer.
- What are the power requirements of this module?
- It requires 1.2 A at 48 V, totaling 56 W.
- Can you describe the physical specifications of the 10-Gigabit Ethernet IQ2E module?
- The module is designed for a 5 rack unit system, can be installed in systems with up to 9 units per rack, and occupies 2 Modular Port Concentrator (MPC) slots. It supports a per slot capacity of 480 Gbps, contributing to a system capacity of 1.92 Tbps.
- What are the environmental operating conditions for this module?
- It operates within a humidity range of 5% to 90%, at altitudes up to 10,000 feet (3048 meters).
- How does the module support network expansion and scalability?
- With support for up to 80 1GbE and 80 10GbE connections, along with 16 10GbE DWDM and 4 100GbE DWDM channels, the module offers significant scalability for expanding network infrastructures.
- What memory capacity does the 10-Gigabit Ethernet IQ2E module have?
- The module is equipped with 64 GB of DDR4 RAM.
- How does the module contribute to the overall system capacity?
- It significantly enhances system capacity, contributing to the total 1.92 Tbps of system throughput capability.
- What are the maximum transmission units (MTUs) supported by this module?
- The module supports large MTUs of up to 9192 bytes, allowing for efficient transmission of large data packets.
Product Review
The Juniper PC-1XGE-TYPE3-XFP-IQ2E offers high-performance throughput with capabilities for both WAN-PHY at 9.953 Gbps and LAN-PHY at 10.3125 Gbps, accommodating large MTUs up to 9192 bytes, which is beneficial for networks requiring high capacity data transmission. However, its power requirement of 56 W and the limitation of being a single-port module may restrict its use in environments needing higher port density or lower power consumption. Additionally, the system's capacity to support up to 1.92 Tbps and compatibility with both 10GbE and 100GbE DWDM interfaces make it versatile for various network infrastructures, though the rack space it occupies and the specific environmental conditions required might not suit all deployment scenarios.
Overview
The Juniper PC-1XGE-TYPE3-XFP-IQ2E is a high-capacity network interface card designed to meet the demands of modern, high-speed networks. It is equipped with a single 10-Gigabit Ethernet port that supports both WAN-PHY and LAN-PHY modes, allowing for flexible deployment across various network architectures. The card is designed for use with optical connections, featuring an LC connector type and compatibility with XFP transceivers.
This network interface card is engineered to deliver exceptional performance with a throughput capacity that matches the requirements of enterprises and service providers alike. In WAN-PHY mode, the card operates at a speed of 9.953 Gbps, while in LAN-PHY mode, it can reach speeds of up to 10.3125 Gbps. This dual-mode functionality ensures that the card can be seamlessly integrated into a wide range of network environments. Additionally, the card operates in full-duplex mode, enabling simultaneous two-way data transmission and increasing the efficiency of data flow across the network.
One of the standout features of the PC-1XGE-TYPE3-XFP-IQ2E is its support for large maximum transmission units (MTUs) of up to 9192 bytes. This capability allows for the efficient handling of large data packets, reducing the need for packet fragmentation and improving overall network performance.
The hardware specifications reveal a device that is not only powerful but also designed with scalability and reliability in mind:
- Power requirements are modest at 1.2 A @48 V (56 W), ensuring that the card's operation is energy-efficient.
- The card's design allows for its deployment in environments with up to 90% humidity and at altitudes as high as 10,000 feet, offering versatility in various operating conditions.
- With a capacity to support up to 80 1GbE and 80 10GbE connections, the card is capable of handling significant network loads.
- It also supports up to 16 10GbE DWDM and 4 100GbE DWDM connections, providing ample bandwidth for data-intensive applications.
- The system's overall capacity of 1.92 Tbps, combined with 64 GB of DDR4 RAM, ensures that the card can manage extensive data flows, making it suitable for the core of any high-performance network.
The PC-1XGE-TYPE3-XFP-IQ2E is designed for installation in systems that require high-density networking hardware. It occupies 5 rack units, with the ability to fit 9 systems per rack. Each system supports 2 MPCs, with a per-slot capacity of 480 Gbps, contributing to the card's high system capacity.
In summary, the Juniper PC-1XGE-TYPE3-XFP-IQ2E is a powerful network interface card that offers:
- A 10-Gigabit Ethernet port with support for large MTUs.
- Flexible WAN-PHY and LAN-PHY operating modes.
- High system capacity and performance for demanding network environments.
With its combination of performance, flexibility, and capacity, this card is an excellent choice for organizations looking to upgrade their network infrastructure to support high-speed, high-volume data transmission.
Specifications
| Item Number | Juniper PC-1XGE-TYPE3-XFP-IQ2E |
| Producer | Juniper |
| Interface | 10-Gigabit Ethernet IQ2E, Single-port XFP |
| Connector Type | Optical: LC |
| Port Count | One 10-Gigabit Ethernet Port |
| Energy Consumption | 1.2 A @48 V (56 W) |
| Data Rate | Throughput for high-demand applications |
| WAN Interface Speed | 9.953 Gbps (WAN-PHY) |
| LAN Interface Speed | 10.3125 Gbps (LAN-PHY) |
| Communication Mode | Full-duplex |
| Maximum Packet Size | Up to 9192 bytes |
| Enclosure Size | 5 Rack Units |
| Max Units Per Rack | 9 Systems |
| Slot Capacity | 2 MPCs, 480 Gbps each |
| Total Bandwidth | 1.92 Terabits per second |
| Humidity Range for Operation | 5% to 90% |
| Operational Altitude Limit | Up to 10,000 feet (3048 meters) |
| 1GbE Ports Maximum | 80 Ports |
| 10GbE Ports Maximum | 80 Ports |
| Dense Wavelength-Division Multiplexing 10GbE | 16 Channels |
| Dense Wavelength-Division Multiplexing 100GbE | 4 Channels |
| Memory | 64 GB DDR4 RAM |