RSF Supply is not an authorized distributor. We sell Preowned Surplus and Refurbished products, all warranties are with RSF Supply and not the manufacturer. Firmware or Software is not included.
Overview
The Cisco N3K-C3524P-10G is a network switch designed to accommodate the demanding requirements of modern data centers and high-end computing environments. This device is equipped with a variety of ports and features optimized for efficient data handling and network management.
Central to its design are 24 fixed SFP+ ports, providing ample connectivity for high-speed networking devices. These ports support 10 Gigabit Ethernet connections, enabling rapid data transfer and communication between connected devices. In addition to these, the switch includes one 1-PPS Timing Port, essential for time-sensitive applications and synchronization across networked devices.
For management purposes, the Cisco N3K-C3524P-10G is outfitted with two management ports, facilitating remote and local administration of the switch. These ports operate at speeds of 10/100/1000 Mbps, ensuring compatibility with a wide range of network management devices. A single RS-232 Serial console port is also available for direct device configuration and monitoring, alongside one USB port for firmware updates or file transfers.
In terms of performance, this switch boasts a switching capacity of 480 Gbps and a forwarding rate of 360 Mpps. These specifications underscore the device's ability to handle substantial data throughput, making it suitable for environments with intensive data or high levels of network traffic.
Power consumption is rated at 142 W, with a heat dissipation of 484 BTU/Hour, reflecting an efficient use of energy relative to its performance capabilities. The switch supports up to 64,000 MAC addresses, 24,000 IPv4 Unicast Routes, and 64,000 IPv4 Hosts. Additionally, it can handle 8,000 IPv4 Multicast Routes, underscoring its versatility in various networking scenarios.
- VLAN support is extensive, with the capacity for up to 4096 VLANs, enabling complex network segmentation and improved security.
- The device also supports 4096 ACL entries for granular access control and security policy implementation.
- For network optimization and redundancy, the switch can manage up to 24 EtherChannels with up to 24 ports each, along with 512 RSTP instances and 64 MSTP instances.
Specs
| Model | N3K-C3524P-10G |
| Manufacturer | Cisco |
| SFP+ Ports Quantity | 24 |
| 1-PPS Port Count | 1 |
| Administration Ports | 2 |
| Serial Ports for Console Access | 1 |
| USB Interface Count | 1 |
| Speed of Management Interface | 10/100/1000 Mbps |
| Console Interface Specification | RS-232 Serial |
| Switch Capacity | 480 Gbps |
| Rate of Packet Forwarding | 360 Mpps |
| Power Requirement | 142 W |
| Thermal Output | 484 BTU/Hour |
| MAC Address Capacity | 64,000 |
| IPv4 Route Entries for Unicast | 24,000 |
| IPv4 Host Entries | 64,000 |
| IPv4 Routes for Multicast | 8000 |
| Supported VLANs | 4096 |
| ACL Entries Supported | 4096 |
| RSTP Instance Limit | 512 |
| MSTP Instance Limit | 64 |
| EtherChannel Count | 24 |
| Ports per EtherChannel Maximum | 24 |
| Memory Buffer | 6 MB |
| Boot Flash Storage | 2 GB |
| Physical Dimensions (H x W x D) | 1.72 x 17.3 x 18.38 in. |
| Temperature Range for Operation | 0 °C to 40 °C |
N3K-C3524P-10G
Sold out
Original price
$0.00
-
Original price
$0.00
Original price
$0.00
$0.00
-
$0.00
Current price
$0.00
Orders typically ship within 1-3 Business days, if you need an item to ship sooner please contact us.
Product Description
The N3K-C3524P-10G Cisco switch features 24 fixed SFP+ ports and a switching capacity of 480 Gbps, designed to efficiently manage network traffic with a forwarding rate of 360 Mpps. It supports up to 64,000 MAC addresses, 24,000 IPv4 unicast routes, and 4096 VLANs, catering to extensive network demands. With management port speeds of 10/100/1000 Mbps, a 6 MB buffer size, and operating power of 142 W, this device is engineered for high-performance networking environments.FAQs for the N3K-C3524P-10G
- What is the switching capacity of this network switch?
The switching capacity is 480 Gbps. - How many SFP+ ports does the switch have?
The switch has 24 fixed SFP+ ports. - Can you detail the power consumption and heat dissipation for this device?
Operating power is 142 W, and heat dissipation is 484 BTU/Hour. - What type of console port is available on this device?
It features an RS-232 serial console port. - What is the maximum number of MAC addresses supported?
The device supports up to 64,000 MAC addresses. - How many VLANs can this switch support?
The switch can support up to 4096 VLANs. - What are the operating temperature limits for this switch?
The operating temperature range is 0 °C to 40 °C. - What is the forwarding rate of the switch?
The forwarding rate is 360 Mpps. - How much boot flash memory does the switch have?
The switch is equipped with 2 GB of boot flash memory. - What are the dimensions of the switch?
The dimensions are 1.72 x 17.3 x 18.38 inches (H x W x D).
Product Review
The Cisco N3K-C3524P-10G offers a solid switching capacity of 480 Gbps and a forwarding rate of 360 Mpps, ensuring efficient packet handling for medium-sized networks. However, its operating power consumption of 142 W and heat dissipation at 484 BTU/hour may pose challenges for environments striving for energy efficiency. Additionally, with 24 fixed SFP+ ports and comprehensive support for up to 4096 VLANs, this switch is versatile for various networking configurations but may require careful thermal management in densely packed racks.
Overview
The Cisco N3K-C3524P-10G is a network switch designed to accommodate the demanding requirements of modern data centers and high-end computing environments. This device is equipped with a variety of ports and features optimized for efficient data handling and network management.
Central to its design are 24 fixed SFP+ ports, providing ample connectivity for high-speed networking devices. These ports support 10 Gigabit Ethernet connections, enabling rapid data transfer and communication between connected devices. In addition to these, the switch includes one 1-PPS Timing Port, essential for time-sensitive applications and synchronization across networked devices.
For management purposes, the Cisco N3K-C3524P-10G is outfitted with two management ports, facilitating remote and local administration of the switch. These ports operate at speeds of 10/100/1000 Mbps, ensuring compatibility with a wide range of network management devices. A single RS-232 Serial console port is also available for direct device configuration and monitoring, alongside one USB port for firmware updates or file transfers.
In terms of performance, this switch boasts a switching capacity of 480 Gbps and a forwarding rate of 360 Mpps. These specifications underscore the device's ability to handle substantial data throughput, making it suitable for environments with intensive data or high levels of network traffic.
Power consumption is rated at 142 W, with a heat dissipation of 484 BTU/Hour, reflecting an efficient use of energy relative to its performance capabilities. The switch supports up to 64,000 MAC addresses, 24,000 IPv4 Unicast Routes, and 64,000 IPv4 Hosts. Additionally, it can handle 8,000 IPv4 Multicast Routes, underscoring its versatility in various networking scenarios.
- VLAN support is extensive, with the capacity for up to 4096 VLANs, enabling complex network segmentation and improved security.
- The device also supports 4096 ACL entries for granular access control and security policy implementation.
- For network optimization and redundancy, the switch can manage up to 24 EtherChannels with up to 24 ports each, along with 512 RSTP instances and 64 MSTP instances.
Specifications
| Model | N3K-C3524P-10G |
| Manufacturer | Cisco |
| SFP+ Ports Quantity | 24 |
| 1-PPS Port Count | 1 |
| Administration Ports | 2 |
| Serial Ports for Console Access | 1 |
| USB Interface Count | 1 |
| Speed of Management Interface | 10/100/1000 Mbps |
| Console Interface Specification | RS-232 Serial |
| Switch Capacity | 480 Gbps |
| Rate of Packet Forwarding | 360 Mpps |
| Power Requirement | 142 W |
| Thermal Output | 484 BTU/Hour |
| MAC Address Capacity | 64,000 |
| IPv4 Route Entries for Unicast | 24,000 |
| IPv4 Host Entries | 64,000 |
| IPv4 Routes for Multicast | 8000 |
| Supported VLANs | 4096 |
| ACL Entries Supported | 4096 |
| RSTP Instance Limit | 512 |
| MSTP Instance Limit | 64 |
| EtherChannel Count | 24 |
| Ports per EtherChannel Maximum | 24 |
| Memory Buffer | 6 MB |
| Boot Flash Storage | 2 GB |
| Physical Dimensions (H x W x D) | 1.72 x 17.3 x 18.38 in. |
| Temperature Range for Operation | 0 °C to 40 °C |