Skip to content
SFP-10/25G-LR-S

RSF Supply is not an authorized distributor. We sell Preowned Surplus and Refurbished products, all warranties are with RSF Supply and not the manufacturer. Firmware or Software is not included.

Overview

The CISCO SFP-10/25G-LR-S is a dual-rate Small Form-Factor Pluggable (SFP) transceiver designed for use in 10-Gigabit and 25-Gigabit Ethernet links over single-mode fiber (SMF). It supports a link length of up to 10 kilometers at a wavelength of 1310 nm, making it an ideal solution for extended range data transmission requirements. This transceiver is compatible with the G.652 micron core size fiber, ensuring a wide compatibility with existing fiber infrastructure. This model is engineered to meet the demands of high-speed data networks, offering flexibility with 10GBASE and 25GBASE operation modes. For 25G operation, it necessitates RS-FEC (Reed-Solomon Forward Error Correction) on the host port to enhance signal integrity over longer distances. The transceiver’s maximum power consumption is modest at 1.3 watts, contributing to energy efficiency in data center environments. The CISCO SFP-10/25G-LR-S comes equipped with dual LC/PC connectors, providing a secure and reliable connection to the network. The inclusion of a blue pull tab or bail latch facilitates easy installation and removal, enhancing the usability of the device in densely populated network environments. It also supports Fibre Channel over Ethernet (FCoE), allowing for the integration of storage and data networking on a single platform for streamlined infrastructure and reduced costs. Key performance metrics include a maximum transmit power of 2.0 dBm and a minimum transmit power of -8.2 dBm at 10G, and for 25G, the minimum transmit power improves to -7 dBm. This ensures strong signal strength and reliable connectivity over the full 10 km link length. On the receiving end, the transceiver can handle a maximum power of 2.0 dBm and a minimum power of -14.4 dBm at 10G, with a slightly better minimum receive power of -13.3 dBm at 25G, ensuring compatibility with a range of signal strengths without compromising on performance.
  • Supports 10GBASE and 25GBASE operation modes for versatile network integration.
  • Dual LC/PC connectors ensure a reliable, secure fiber connection.
  • Energy-efficient design with a maximum power consumption of 1.3 watts.
Temperature tolerance is a crucial aspect of network hardware, and the CISCO SFP-10/25G-LR-S is built to operate within a broad range of environmental conditions. It can function within a commercial temperature range of 0 °C to 70 °C, and for more demanding environments, it can withstand industrial temperatures from -40 °C to 85 °C. This durability is extended to storage conditions as well, with the device capable of being stored within the same temperature range, ensuring long-term reliability. In summary, the CISCO SFP-10/25G-LR-S transceiver is designed for efficient and reliable long-range data transmission. Its support for both 10G and 25G operations, combined with low power consumption, robust temperature tolerance, and FCoE compatibility, make it a versatile and efficient choice for expanding enterprise and data center networks.

Specs

Item Number CISCO SFP-10/25G-LR-S
Data Rate 10/25Gbps
Transmission Distance Up to 10 kilometers
Required Host Interface for 25G RS-FEC Enabled
Fiber Type Single-Mode Fiber
Peak Power Usage 1.3 Watts
Extract Mechanism Color Blue
Emission Wavelength 1310 nanometers
Fiber Core Diameter G.652 Microns
Modal Bandwidth Unavailable
10G Max Output Power 0.5 dBm
10G Min Output Power -8.2 dBm
25G Max Output Power 2.0 dBm
25G Min Output Power -7 dBm
10G Max Input Power 0.5 dBm
10G Min Input Power -14.4 dBm
25G Max Input Power 2.0 dBm
25G Min Input Power -13.3 dBm
Optical Interface Dual LC/PC Connector
Supports FCoE Supported
Operational Temp Range (Commercial) 0°C to 70°C
Operational Temp Range (Industrial) -40°C to 85°C
Storage Temp Range -40°C to 85°C

SFP-10/25G-LR-S

by Cisco
Product Line: Cisco Series
Product Type: SFP28 Module
Sold out
$0.00 - $0.00
$0.00
$0.00 - $0.00
$0.00
Title: Surplus

Orders typically ship within 1-3 Business days, if you need an item to ship sooner please contact us.

Product Description

The SFP-10/25G-LR-S CISCO is designed for long-range data communication, supporting 10/25GBASE speeds over a 10 km link length on SMF with a core size of G.652 microns. It operates within a wavelength of 1310 nm, requiring RS-FEC for 25G operation, and is compatible with dual LC/PC connectors. The module's power consumption peaks at 1.3 W, featuring a blue pull tab/bail latch for easy identification, and supports a temperature range from 0 °C to 70 °C for commercial environments and -40 °C to 85 °C for industrial or storage conditions.

FAQs for the SFP-10/25G-LR-S 

    

  • What is the maximum link length supported by this networking hardware?
    The maximum link length supported is 10 km.
    • 

  • What type of cable is required for the 10/25GBASE hardware?
    The hardware requires SMF (Single-Mode Fiber) cable.
    • 

  • What is the maximum power consumption of this device?
    The device's maximum power consumption is 1.3 W.
    • 

  • What color is the pull tab/bail latch on this model?
    The pull tab/bail latch color is blue.
    • 

  • What wavelength does the hardware operate at?
    The hardware operates at a wavelength of 1310 nm.
    • 

  • What is the core size of the fiber used?
    The core size of the fiber used is G.652 microns.
    • 

  • Is RS-FEC required for 25G operation?
    Yes, RS-FEC is required for 25G operation.
    • 

  • What type of connectors does this device use?
    The device uses dual LC/PC connectors.
    • 

  • Does this hardware support FCoE?
    Yes, the hardware supports FCoE (Fibre Channel over Ethernet).
    • 

  • What is the operating temperature range for commercial use?
    The operating temperature range for commercial use is 0 °C to 70 °C.
    •

Product Review

The CISCO SFP-10/25G-LR-S supports both 10G and 25G speeds with a link length of up to 10 km over single-mode fiber, catering to versatile networking demands. The requirement for RS-FEC (Reed-Solomon Forward Error Correction) at 25G operation introduces complexity but ensures data integrity over longer distances. Despite its efficient power consumption of 1.3 W, the module's performance is constrained by specific host port requirements and temperature ranges, which could limit deployment flexibility in varying environmental conditions.

Overview

The CISCO SFP-10/25G-LR-S is a dual-rate Small Form-Factor Pluggable (SFP) transceiver designed for use in 10-Gigabit and 25-Gigabit Ethernet links over single-mode fiber (SMF). It supports a link length of up to 10 kilometers at a wavelength of 1310 nm, making it an ideal solution for extended range data transmission requirements. This transceiver is compatible with the G.652 micron core size fiber, ensuring a wide compatibility with existing fiber infrastructure. This model is engineered to meet the demands of high-speed data networks, offering flexibility with 10GBASE and 25GBASE operation modes. For 25G operation, it necessitates RS-FEC (Reed-Solomon Forward Error Correction) on the host port to enhance signal integrity over longer distances. The transceiver’s maximum power consumption is modest at 1.3 watts, contributing to energy efficiency in data center environments. The CISCO SFP-10/25G-LR-S comes equipped with dual LC/PC connectors, providing a secure and reliable connection to the network. The inclusion of a blue pull tab or bail latch facilitates easy installation and removal, enhancing the usability of the device in densely populated network environments. It also supports Fibre Channel over Ethernet (FCoE), allowing for the integration of storage and data networking on a single platform for streamlined infrastructure and reduced costs. Key performance metrics include a maximum transmit power of 2.0 dBm and a minimum transmit power of -8.2 dBm at 10G, and for 25G, the minimum transmit power improves to -7 dBm. This ensures strong signal strength and reliable connectivity over the full 10 km link length. On the receiving end, the transceiver can handle a maximum power of 2.0 dBm and a minimum power of -14.4 dBm at 10G, with a slightly better minimum receive power of -13.3 dBm at 25G, ensuring compatibility with a range of signal strengths without compromising on performance.
  • Supports 10GBASE and 25GBASE operation modes for versatile network integration.
  • Dual LC/PC connectors ensure a reliable, secure fiber connection.
  • Energy-efficient design with a maximum power consumption of 1.3 watts.
Temperature tolerance is a crucial aspect of network hardware, and the CISCO SFP-10/25G-LR-S is built to operate within a broad range of environmental conditions. It can function within a commercial temperature range of 0 °C to 70 °C, and for more demanding environments, it can withstand industrial temperatures from -40 °C to 85 °C. This durability is extended to storage conditions as well, with the device capable of being stored within the same temperature range, ensuring long-term reliability. In summary, the CISCO SFP-10/25G-LR-S transceiver is designed for efficient and reliable long-range data transmission. Its support for both 10G and 25G operations, combined with low power consumption, robust temperature tolerance, and FCoE compatibility, make it a versatile and efficient choice for expanding enterprise and data center networks.

Specifications

Item Number CISCO SFP-10/25G-LR-S
Data Rate 10/25Gbps
Transmission Distance Up to 10 kilometers
Required Host Interface for 25G RS-FEC Enabled
Fiber Type Single-Mode Fiber
Peak Power Usage 1.3 Watts
Extract Mechanism Color Blue
Emission Wavelength 1310 nanometers
Fiber Core Diameter G.652 Microns
Modal Bandwidth Unavailable
10G Max Output Power 0.5 dBm
10G Min Output Power -8.2 dBm
25G Max Output Power 2.0 dBm
25G Min Output Power -7 dBm
10G Max Input Power 0.5 dBm
10G Min Input Power -14.4 dBm
25G Max Input Power 2.0 dBm
25G Min Input Power -13.3 dBm
Optical Interface Dual LC/PC Connector
Supports FCoE Supported
Operational Temp Range (Commercial) 0°C to 70°C
Operational Temp Range (Industrial) -40°C to 85°C
Storage Temp Range -40°C to 85°C

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare