Skip to content
WS-C4948E-S

RSF Supply is not an authorized distributor. We sell Preowned Surplus and Refurbished products, all warranties are with RSF Supply and not the manufacturer.

Overview

The Cisco WS-C4948E-S is a highly efficient, 1 Rack Unit (RU) switch designed to meet the rigorous demands of enterprise and data center environments. This switch offers a comprehensive set of features, making it an ideal choice for businesses looking for a scalable and reliable networking solution. At its core, the Cisco WS-C4948E-S provides 48 10/100/1000 RJ45 ports and 4 10GbE SFP+ ports, supporting high-speed connectivity and allowing for a wide range of network configurations. Despite not coming with a power supply, it incorporates front-to-back cooling, ensuring optimal performance without overheating. The device measures 1.75 x 17.5 x 19.4 inches and weighs 19 lbs, making it compact enough for efficient use of rack space without compromising on port density. The hot-swappable fan feature ensures minimal downtime, as fans can be replaced without powering down the device. Power efficiency is a key consideration in the design of the WS-C4948E-S. It has an average power consumption of 230W and can go up to a maximum of 275W under full load, balancing performance with energy use. For mounting, the switch offers flexibility with front and rear mount options, including a high-performance rear mount, accommodating various rack configurations. In terms of performance, the switch boasts a switching capacity of 176 Gbps and offers throughput of 131 Mpps for IPv4 traffic and 110 Mpps for IPv6, ensuring swift data processing and transmission. It supports up to 57,000 routes, 55,000 MAC addresses, and allows for 4094 PVST and VLAN IDs, making it suitable for large and complex network infrastructures. The Cisco WS-C4948E-S does not support the Cisco TwinGig or OneX Converter Modules, focusing instead on direct 10GbE connectivity through its SFP and SFP+ uplink ports. This approach streamlines the network infrastructure by eliminating the need for additional conversion modules. Key hardware specifications include:
  • Switching Capacity: 176 Gbps
  • Throughput: 131 Mpps (IPv4), 110 Mpps (IPv6)
  • Supported Routes: 57,000
This switch also excels in network segmentation and security, supporting 4094 Spanning Tree Protocol instances, an equal number of Switched Virtual Interfaces and active VLANs, alongside 28,000 multicast routes. For traffic analysis and security, it provides 8 ingress and 8 egress ports for the Switched Port Analyzer (SPAN), facilitating detailed network monitoring. With hardware entries capped at 32,000, the Cisco WS-C4948E-S can handle extensive device and IP address management, suitable for growing enterprises and data centers. This switch’s robust feature set, combined with its compact and efficient design, makes it a powerful tool for managing complex networks, ensuring high performance, reliability, and scalability for modern business needs.

Specs

Part Number and Manufacturer Cisco WS-C4948E-S
48-Port Gigabit Ethernet (RJ45) Interface Count 48
10 Gigabit Ethernet (SFP+) Interface Count 4
Power Supply Included No
Cooling Direction Front-to-Back
Rack Units (RU) 1
Dimensions (Height x Width x Depth) 1.75 x 17.5 x 19.4 inches
Unit Weight 19 pounds
Replaceable Fan Unit Yes
Typical Power Usage 230 Watts
Peak Power Draw 275 Watts
Mounting Options Front and Rear, Enhanced Rear Support
Supported Optic Modules SFP, SFP+
Compatibility with TwinGig Converter Module No
Compatibility with OneX Converter Module No
Data Processing Capacity 176 Gbps
Network Throughput 131 Mpps (IPv4), 110 Mpps (IPv6)
Maximum Route Entries 57,000
MAC Address Capacity 55,000
PVST+ and Max VLANs 4094
Spanning Tree Instances 4094
Virtual Interfaces (SVIs) 4094
VLANs Active 4094
Supported Multicast Routes 28,000
Table Entries for Hardware Processing 32,000
SPAN Sessions 8 Ingress, 8 Egress

WS-C4948E-S

by Cisco
Product Line: Cisco Catalyst 4948E Series
Product Type: Ethernet Switch
Sold out
$0.00 - $0.00
$0.00
$0.00 - $0.00
$0.00
Title: Surplus

Orders typically ship within 1-3 Business days, if you need an item to ship sooner please contact us.

Product Description

The WS-C4948E-S Cisco switch features 48 10/100/1000 (RJ45) ports and 4 10GbE (SFP+) ports, designed for high-density connectivity with a switching capacity of 176 Gbps. It operates with a front-to-back cooling airflow system in a 1 RU form factor, supporting efficient space utilization in data centers. With capabilities of processing up to 131 Mpps (IPv4) and 110 Mpps (IPv6), it accommodates a broad range of routing and switching needs.

FAQs for the WS-C4948E-S 

    

  • What is the total number of 10/100/1000 (RJ45) ports available on this switch?
    
There are 48 10/100/1000 (RJ45) ports available.
    • 


  • How many 10GbE (SFP+) ports does the switch support?
    
The switch supports 4 10GbE (SFP+) ports.
    • 


  • Does the switch come with a power supply unit?
    
No, the switch does not include a power supply unit.
    • 


  • What type of cooling mechanism is implemented in the switch?
    
The switch uses front-to-back cooling.
    • 


  • Can you provide the dimensions and weight of the switch?
    
The switch measures 1.75 x 17.5 x 19.4 inches (H x W x D) and weighs 19 lbs.
    • 


  • Is the fan in the switch hot-swappable?
    
Yes, the fan is hot-swappable.
    • 


  • What are the average and maximum power consumption values for the switch?
    
The average power consumption is 230 W, and the maximum power consumption is 275 W.
    • 


  • What are the rack mounting options available for the switch?
    
The switch can be mounted using front and rear mount, high-performance rear mount options.
    • 


  • Does the switch support Cisco TwinGig and OneX Converter Modules?
    
No, the switch does not support Cisco TwinGig or OneX Converter Modules.
    • 


  • What is the switching capacity and throughput of the switch?
    
The switching capacity is 176 Gbps, with a throughput of 131 Mpps (IPv4) and 110 Mpps (IPv6).
    •

Product Review

The Cisco WS-C4948E-S switch offers 48 10/100/1000 RJ45 ports and four 10GbE SFP+ ports, catering to high-density, high-speed networking requirements. However, the lack of a power supply and no support for Cisco TwinGig or OneX Converter Modules may limit flexibility in certain network setups. It supports a high switching capacity of 176 Gbps and a throughput of 131 Mpps for IPv4, coupled with advanced features like front-to-back cooling and hot-swappable fans, making it suitable for environments demanding continuous operation and efficient cooling.

Overview

The Cisco WS-C4948E-S is a highly efficient, 1 Rack Unit (RU) switch designed to meet the rigorous demands of enterprise and data center environments. This switch offers a comprehensive set of features, making it an ideal choice for businesses looking for a scalable and reliable networking solution. At its core, the Cisco WS-C4948E-S provides 48 10/100/1000 RJ45 ports and 4 10GbE SFP+ ports, supporting high-speed connectivity and allowing for a wide range of network configurations. Despite not coming with a power supply, it incorporates front-to-back cooling, ensuring optimal performance without overheating. The device measures 1.75 x 17.5 x 19.4 inches and weighs 19 lbs, making it compact enough for efficient use of rack space without compromising on port density. The hot-swappable fan feature ensures minimal downtime, as fans can be replaced without powering down the device. Power efficiency is a key consideration in the design of the WS-C4948E-S. It has an average power consumption of 230W and can go up to a maximum of 275W under full load, balancing performance with energy use. For mounting, the switch offers flexibility with front and rear mount options, including a high-performance rear mount, accommodating various rack configurations. In terms of performance, the switch boasts a switching capacity of 176 Gbps and offers throughput of 131 Mpps for IPv4 traffic and 110 Mpps for IPv6, ensuring swift data processing and transmission. It supports up to 57,000 routes, 55,000 MAC addresses, and allows for 4094 PVST and VLAN IDs, making it suitable for large and complex network infrastructures. The Cisco WS-C4948E-S does not support the Cisco TwinGig or OneX Converter Modules, focusing instead on direct 10GbE connectivity through its SFP and SFP+ uplink ports. This approach streamlines the network infrastructure by eliminating the need for additional conversion modules. Key hardware specifications include:
  • Switching Capacity: 176 Gbps
  • Throughput: 131 Mpps (IPv4), 110 Mpps (IPv6)
  • Supported Routes: 57,000
This switch also excels in network segmentation and security, supporting 4094 Spanning Tree Protocol instances, an equal number of Switched Virtual Interfaces and active VLANs, alongside 28,000 multicast routes. For traffic analysis and security, it provides 8 ingress and 8 egress ports for the Switched Port Analyzer (SPAN), facilitating detailed network monitoring. With hardware entries capped at 32,000, the Cisco WS-C4948E-S can handle extensive device and IP address management, suitable for growing enterprises and data centers. This switch’s robust feature set, combined with its compact and efficient design, makes it a powerful tool for managing complex networks, ensuring high performance, reliability, and scalability for modern business needs.

Specifications

Part Number and Manufacturer Cisco WS-C4948E-S
48-Port Gigabit Ethernet (RJ45) Interface Count 48
10 Gigabit Ethernet (SFP+) Interface Count 4
Power Supply Included No
Cooling Direction Front-to-Back
Rack Units (RU) 1
Dimensions (Height x Width x Depth) 1.75 x 17.5 x 19.4 inches
Unit Weight 19 pounds
Replaceable Fan Unit Yes
Typical Power Usage 230 Watts
Peak Power Draw 275 Watts
Mounting Options Front and Rear, Enhanced Rear Support
Supported Optic Modules SFP, SFP+
Compatibility with TwinGig Converter Module No
Compatibility with OneX Converter Module No
Data Processing Capacity 176 Gbps
Network Throughput 131 Mpps (IPv4), 110 Mpps (IPv6)
Maximum Route Entries 57,000
MAC Address Capacity 55,000
PVST+ and Max VLANs 4094
Spanning Tree Instances 4094
Virtual Interfaces (SVIs) 4094
VLANs Active 4094
Supported Multicast Routes 28,000
Table Entries for Hardware Processing 32,000
SPAN Sessions 8 Ingress, 8 Egress

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare