RSF Supply is not an authorized distributor. We sell Preowned Surplus and Refurbished products, all warranties are with RSF Supply and not the manufacturer. Firmware or Software is not included.
Overview
The Juniper QSFP-100GBASE-LR4 is a high-performance 100 Gigabit Ethernet transceiver designed for long-range optical communication over single-mode fiber (SMF). It utilizes a duplex LC connector for physical interfacing, ensuring compatibility with standard network equipment and fiber optic cabling. This transceiver supports a maximum data rate of 103.125 Gbps, achieved by aggregating four lanes, each operating at a signaling rate of 25.78125 GBd with a precision of +/- 100 ppm.
The QSFP-100GBASE-LR4 employs Distributed Feedback (DFB) lasers for transmitting data. These lasers generate light in four wavelength ranges: 1294.53 nm to 1296.59 nm, and 1299.02 nm to 1301.09 nm. The output power of the transmitter for each lane varies between a minimum of -4.3 dBm and a maximum of 4.5 dBm. On the receiving end, the QSFP-100GBASE-LR4 features a PIN photodiode that can handle input power per lane from -10.6 dBm (minimum) to 4.5 dBm (maximum). The transceiver is designed for a core/cladding size of 9/125 µm, ensuring it is suitable for standard single-mode fiber optic cables.
This transceiver is capable of maintaining a reliable connection over distances up to 10 kilometers, facilitated by its 4dB power budget. It operates efficiently within a wide temperature range, from 0° C to 70° C for operating conditions, and from -40° C to 85° C when stored. Power consumption is kept low, with a maximum rating of 3.5 W, which aids in minimizing operational costs and heat generation in data center environments.
- Bit Error Ratio (BER) stands impressively at 1E-12, signifying a very high level of transmission accuracy and reliability.
- It requires a +3.3V single power supply, simplifying power management within networking equipment.
- The transceiver's compact QSFP form factor allows for high-density installations, making it an ideal choice for data centers and large enterprise networks.
Specs
| Part Number | Juniper QSFP-100GBASE-LR4 |
| Manufacturer | Juniper |
| Network Speed | 100G Ethernet |
| Interface | LC Duplex |
| Rate per Channel | 25.78125 Gb/s +/- 100 ppm |
| Emission Wavelengths | 1294.53 to 1296.59 nm, 1299.02 to 1301.09 nm |
| Lane Minimum Output Power | -4.3 dBm |
| Lane Maximum Output Power | 4.5 dBm |
| Minimum Receiver Sensitivity | -10.6 dBm |
| Maximum Receiver Sensitivity | 4.5 dBm |
| Fiber Core/Cladding Diameter | 9/125 µm |
| Maximum Reach | 10 km |
| Power Usage | 3.5 Watts |
| Minimum Operating Temperature | 0°C |
| Maximum Operating Temperature | 70°C |
| Minimum Storage Temperature | -40°C |
| Maximum Storage Temperature | 85°C |
| Overall Data Rate | 103.125 Gbps (4 x 25.78 Gbps) |
| Bit Error Rate | 1E-12 |
| Optical Power Budget | 4 dB |
| Electrical Supply | +3.3V DC |
| Emitter | DFB Laser |
| Fiber Type | Single Mode Fiber (SMF) |
| Detector | PIN Diode |
QSFP-100GBASE-LR4
Original price
$657.00
-
Original price
$2,939.00
Original price
$2,939.00
$657.00
-
$2,939.00
Current price
$2,939.00
Orders typically ship within 1-3 Business days, if you need an item to ship sooner please contact us.
Product Description
The QSFP-100GBASE-LR4 module supports a 100 Gigabit Ethernet speed over a single-mode fiber (SMF) with a duplex LC connector. It operates with a signaling rate of 25.78125 GBd +/- 100 ppm per lane across four wavelengths ranging from 1294.53 nm to 1301.09 nm, ensuring compatibility with standard network requirements. Designed for long-range transmission, it achieves a distance of 10 km, with a power consumption of up to 3.5 W and operates within a temperature range of 0° C to 70° C.Key Feature for the QSFP100GBASELR4
- What is the maximum data rate supported by this Ethernet device?
The maximum data rate supported is 103.125Gbps, which is achieved by combining four lanes each running at 25.78Gbps. - How does the part specified operate in terms of power supply?
It operates with a +3.3V single power supply. - What type of laser does the transmitter use?
The transmitter uses a DFB (Distributed Feedback) Laser. - What are the operating temperature limits for this device?
The operating temperature range is from 0° C to 70° C. - What is the signaling rate per lane for this device?
The signaling rate for each lane is 25.78125 GBd +/- 100 ppm. - What cable type is compatible with this Ethernet device?
The compatible cable type is Single Mode Fiber (SMF). - What is the Bit Error Ratio (BER) specification?
The Bit Error Ratio (BER) is specified as 1E-12. - What are the transmitter and receiver types in this device?
The transmitter type is a DFB Laser, and the receiver type is a PIN photodiode. - What is the range of wavelengths the transmitter operates within?
The transmitter wavelengths range from 1294.53 nm to 1301.09 nm, divided into two ranges: 1294.53 nm to 1296.59 nm and 1299.02 nm to 1301.09 nm. - What are the storage temperature limits for this Ethernet device?
The storage temperature ranges from -40° C to 85° C.
Product Review
The Juniper QSFP-100GBASE-LR4 module offers a maximum data rate of 103.125Gbps, supporting 100 Gigabit Ethernet over a distance of up to 10 km on single-mode fiber, which is suitable for long-range data transmission needs. However, its power consumption peaks at 3.5W, which could be a consideration for environments aiming for energy efficiency. Additionally, the module operates within a broad temperature range from 0° C to 70° C, ensuring reliability across various operating conditions.
Overview
The Juniper QSFP-100GBASE-LR4 is a high-performance 100 Gigabit Ethernet transceiver designed for long-range optical communication over single-mode fiber (SMF). It utilizes a duplex LC connector for physical interfacing, ensuring compatibility with standard network equipment and fiber optic cabling. This transceiver supports a maximum data rate of 103.125 Gbps, achieved by aggregating four lanes, each operating at a signaling rate of 25.78125 GBd with a precision of +/- 100 ppm.
The QSFP-100GBASE-LR4 employs Distributed Feedback (DFB) lasers for transmitting data. These lasers generate light in four wavelength ranges: 1294.53 nm to 1296.59 nm, and 1299.02 nm to 1301.09 nm. The output power of the transmitter for each lane varies between a minimum of -4.3 dBm and a maximum of 4.5 dBm. On the receiving end, the QSFP-100GBASE-LR4 features a PIN photodiode that can handle input power per lane from -10.6 dBm (minimum) to 4.5 dBm (maximum). The transceiver is designed for a core/cladding size of 9/125 µm, ensuring it is suitable for standard single-mode fiber optic cables.
This transceiver is capable of maintaining a reliable connection over distances up to 10 kilometers, facilitated by its 4dB power budget. It operates efficiently within a wide temperature range, from 0° C to 70° C for operating conditions, and from -40° C to 85° C when stored. Power consumption is kept low, with a maximum rating of 3.5 W, which aids in minimizing operational costs and heat generation in data center environments.
- Bit Error Ratio (BER) stands impressively at 1E-12, signifying a very high level of transmission accuracy and reliability.
- It requires a +3.3V single power supply, simplifying power management within networking equipment.
- The transceiver's compact QSFP form factor allows for high-density installations, making it an ideal choice for data centers and large enterprise networks.
Specifications
| Part Number | Juniper QSFP-100GBASE-LR4 |
| Manufacturer | Juniper |
| Network Speed | 100G Ethernet |
| Interface | LC Duplex |
| Rate per Channel | 25.78125 Gb/s +/- 100 ppm |
| Emission Wavelengths | 1294.53 to 1296.59 nm, 1299.02 to 1301.09 nm |
| Lane Minimum Output Power | -4.3 dBm |
| Lane Maximum Output Power | 4.5 dBm |
| Minimum Receiver Sensitivity | -10.6 dBm |
| Maximum Receiver Sensitivity | 4.5 dBm |
| Fiber Core/Cladding Diameter | 9/125 µm |
| Maximum Reach | 10 km |
| Power Usage | 3.5 Watts |
| Minimum Operating Temperature | 0°C |
| Maximum Operating Temperature | 70°C |
| Minimum Storage Temperature | -40°C |
| Maximum Storage Temperature | 85°C |
| Overall Data Rate | 103.125 Gbps (4 x 25.78 Gbps) |
| Bit Error Rate | 1E-12 |
| Optical Power Budget | 4 dB |
| Electrical Supply | +3.3V DC |
| Emitter | DFB Laser |
| Fiber Type | Single Mode Fiber (SMF) |
| Detector | PIN Diode |