RSF Supply is not an authorized distributor. We sell Preowned Surplus and Refurbished products, all warranties are with RSF Supply and not the manufacturer. Firmware or Software is not included.
Overview
The Cisco WS-C2960L-16TS-LL is a network switch designed for operational efficiency and reliability in small to medium-sized network environments. This model incorporates 16 10/100/1000 Ethernet ports and 2 x 1G Small Form-Factor Pluggable (SFP) uplinks, providing a flexible interface range for various connectivity needs. At its core, the switch is powered by an ARMv7 processor running at 800 MHz, supported by 512 MB of DRAM and 256 MB of flash memory, ensuring swift data processing and ample storage for firmware and network configurations.
A key feature of this device is its fanless design, which not only reduces noise levels, making it ideal for quiet office environments but also minimizes moving parts, contributing to its impressive mean time between failures (MTBF) of over 2.4 million hours. This longevity is essential for businesses relying on continuous network availability.
In terms of performance, the Cisco WS-C2960L-16TS-LL boasts an 18 Gbps forwarding bandwidth and a 36 Gbps switching bandwidth, allowing for efficient data flow and management of network traffic. It supports up to 16,000 unicast MAC addresses, ensuring adequate capacity for device connectivity within the network. Routing capabilities include support for 512 IPv4 unicast direct routes and 256 IPv4 unicast indirect routes, alongside 414 IPv6 unicast direct routes and 128 IPv6 unicast indirect routes, facilitating versatile and scalable network configurations.
The switch also excels in multicast routing, with capacity for 1024 IPv4 multicast routes and IGMP groups, accommodating extensive multicast configurations. Security is addressed through the provision of 384 IPv4/MAC and 256 IPv6 security access control entries (ACEs), enabling detailed and granular access control policies to safeguard the network against unauthorized access.
For network segmentation and management, the device supports up to 256 active VLANs from a pool of 4094 VLAN IDs, offering vast flexibility in network planning and isolation. It also handles up to 64 instances of Spanning Tree Protocol (STP) for building loop-free network topologies. Network monitoring and troubleshooting are facilitated by the capability to establish up to 4 Switched Port Analyzer (SPAN) sessions, providing visibility into network traffic for analysis and diagnostics.
The Cisco WS-C2960L-16TS-LL is designed to handle large frames up to 10,240 bytes, enabling the transmission of jumbo frames for improved performance in data-intensive applications. Its compact size of 1.73 x 9.45 x 10.56 inches and weight of 3.41 lbs allow for easy installation in space-constrained environments, without compromising on port availability or network functionality.
Key hardware specifications include:
- 16 Ethernet 10/100/1000 ports and 2 x 1G SFP uplinks
- Fanless operation for quiet and reliable performance
- High MTBF for prolonged operational life
In summary, the Cisco WS-C2960L-16TS-LL combines essential networking features with reliable hardware, presenting a balanced solution for businesses seeking to enhance their network infrastructure with a manageable, high-performance switch.
Specs
| Part Number and Manufacturer | Cisco WS-C2960L-16TS-LL |
| Ethernet Port Count | 16 Gigabit Ethernet Ports |
| Uplink Interfaces | Two 1G SFP Ports |
| Cooling Mechanism | Passive Cooling |
| Dimensions (Height x Width x Depth) | 1.73 x 9.45 x 10.56 inches |
| Unit Weight | 3.41 pounds |
| Processor Type | ARMv7 800 MHz |
| System Memory | 512 MB DRAM |
| Storage Capacity | 256 MB Flash |
| Rate of Data Processing | 18 Gbps Forwarding Rate |
| Total Switching Capacity | 36 Gbps |
| MAC Address Table Size | 16,000 Entries |
| IPv4 Directly Connected Routes | 512 Entries |
| IPv4 Indirect Routes | 256 Entries |
| IPv6 Direct Routes | 414 Entries |
| IPv6 Indirect Routes | 128 Entries |
| IPv4 Group and Multicast Routes | 1024 Entries |
| IPv4 Multicast Routing Entries | 1024 Entries |
| IPv4 and MAC Access Control Entries | 384 Entries |
| IPv6 Access Control Entries | 256 Entries |
| Max VLANs Supported | 256 |
| Total VLAN IDs | 4094 |
| Spanning Tree Protocol Instances | 64 |
| Session Count for SPAN | 4 |
| Support for Jumbo Frames | Up to 10,240 Bytes |
| Mean Time Between Failures | 2,416,689 Hours |
WS-C2960L-16TS-LL
Sold out
Original price
$0.00
-
Original price
$0.00
Original price
$0.00
$0.00
-
$0.00
Current price
$0.00
Orders typically ship within 1-3 Business days, if you need an item to ship sooner please contact us.
Product Description
The WS-C2960L-16TS-LL offers 16 10/100/1000 Ethernet ports and 2 x 1G SFP uplinks, designed for efficient networking with a forwarding bandwidth of 18 Gbps and switching bandwidth of 36 Gbps. It supports 16,000 unicast MAC addresses, up to 256 IPv4 and IPv6 security access control entries (ACEs), and facilitates up to 256 active VLANs with a comprehensive MTBF of 2,416,689 hours, ensuring reliable long-term operation. This fanless switch operates on an ARMv7 800 MHz CPU with 512 MB DRAM and 256 MB flash memory, accommodating jumbo Ethernet frames up to 10,240 bytes, making it suitable for diverse networking environments.FAQs for the WS-C2960L-16TS-LL
- What is the number of Ethernet ports available on this device?
There are 16 10/100/1000 Ethernet ports available. - How many 1G SFP uplinks does the switch support?
The switch supports 2 x 1G SFP uplinks. - Is the device equipped with a fanless design?
Yes, the device has a fanless design. - What are the physical dimensions of the switch?
The switch dimensions are 1.73 x 9.45 x 10.56 inches (H x W x D). - How much does the switch weigh?
The switch weighs 3.41 lbs. - What type of CPU is used in this device?
The device uses an ARMv7 CPU with an 800 MHz frequency. - How much DRAM and flash memory are available?
The switch has 512 MB of DRAM and 256 MB of flash memory. - What are the forwarding and switching bandwidth capabilities?
The switch offers 18 Gbps forwarding bandwidth and 36 Gbps switching bandwidth. - How many unicast MAC addresses can the device support?
The device can support up to 16,000 unicast MAC addresses. - What is the maximum size for Jumbo Ethernet Frames?
The maximum size for Jumbo Ethernet Frames is 10,240 bytes.
Product Review
The Cisco WS-C2960L-16TS-LL offers 16 Ethernet ports and two 1G SFP uplinks, supporting a variety of network demands with a forwarding bandwidth of 18 Gbps and switching bandwidth of 36 Gbps, suitable for small to medium-sized network environments. Its fanless design and compact dimensions (1.73 x 9.45 x 10.56 in.) ensure quiet operation and ease of placement in space-constrained areas. However, the switch is limited by its ARMv7 800 MHz CPU and 512 MB DRAM, which may hinder performance in highly demanding, data-intensive scenarios.
Overview
The Cisco WS-C2960L-16TS-LL is a network switch designed for operational efficiency and reliability in small to medium-sized network environments. This model incorporates 16 10/100/1000 Ethernet ports and 2 x 1G Small Form-Factor Pluggable (SFP) uplinks, providing a flexible interface range for various connectivity needs. At its core, the switch is powered by an ARMv7 processor running at 800 MHz, supported by 512 MB of DRAM and 256 MB of flash memory, ensuring swift data processing and ample storage for firmware and network configurations.
A key feature of this device is its fanless design, which not only reduces noise levels, making it ideal for quiet office environments but also minimizes moving parts, contributing to its impressive mean time between failures (MTBF) of over 2.4 million hours. This longevity is essential for businesses relying on continuous network availability.
In terms of performance, the Cisco WS-C2960L-16TS-LL boasts an 18 Gbps forwarding bandwidth and a 36 Gbps switching bandwidth, allowing for efficient data flow and management of network traffic. It supports up to 16,000 unicast MAC addresses, ensuring adequate capacity for device connectivity within the network. Routing capabilities include support for 512 IPv4 unicast direct routes and 256 IPv4 unicast indirect routes, alongside 414 IPv6 unicast direct routes and 128 IPv6 unicast indirect routes, facilitating versatile and scalable network configurations.
The switch also excels in multicast routing, with capacity for 1024 IPv4 multicast routes and IGMP groups, accommodating extensive multicast configurations. Security is addressed through the provision of 384 IPv4/MAC and 256 IPv6 security access control entries (ACEs), enabling detailed and granular access control policies to safeguard the network against unauthorized access.
For network segmentation and management, the device supports up to 256 active VLANs from a pool of 4094 VLAN IDs, offering vast flexibility in network planning and isolation. It also handles up to 64 instances of Spanning Tree Protocol (STP) for building loop-free network topologies. Network monitoring and troubleshooting are facilitated by the capability to establish up to 4 Switched Port Analyzer (SPAN) sessions, providing visibility into network traffic for analysis and diagnostics.
The Cisco WS-C2960L-16TS-LL is designed to handle large frames up to 10,240 bytes, enabling the transmission of jumbo frames for improved performance in data-intensive applications. Its compact size of 1.73 x 9.45 x 10.56 inches and weight of 3.41 lbs allow for easy installation in space-constrained environments, without compromising on port availability or network functionality.
Key hardware specifications include:
- 16 Ethernet 10/100/1000 ports and 2 x 1G SFP uplinks
- Fanless operation for quiet and reliable performance
- High MTBF for prolonged operational life
In summary, the Cisco WS-C2960L-16TS-LL combines essential networking features with reliable hardware, presenting a balanced solution for businesses seeking to enhance their network infrastructure with a manageable, high-performance switch.
Specifications
| Part Number and Manufacturer | Cisco WS-C2960L-16TS-LL |
| Ethernet Port Count | 16 Gigabit Ethernet Ports |
| Uplink Interfaces | Two 1G SFP Ports |
| Cooling Mechanism | Passive Cooling |
| Dimensions (Height x Width x Depth) | 1.73 x 9.45 x 10.56 inches |
| Unit Weight | 3.41 pounds |
| Processor Type | ARMv7 800 MHz |
| System Memory | 512 MB DRAM |
| Storage Capacity | 256 MB Flash |
| Rate of Data Processing | 18 Gbps Forwarding Rate |
| Total Switching Capacity | 36 Gbps |
| MAC Address Table Size | 16,000 Entries |
| IPv4 Directly Connected Routes | 512 Entries |
| IPv4 Indirect Routes | 256 Entries |
| IPv6 Direct Routes | 414 Entries |
| IPv6 Indirect Routes | 128 Entries |
| IPv4 Group and Multicast Routes | 1024 Entries |
| IPv4 Multicast Routing Entries | 1024 Entries |
| IPv4 and MAC Access Control Entries | 384 Entries |
| IPv6 Access Control Entries | 256 Entries |
| Max VLANs Supported | 256 |
| Total VLAN IDs | 4094 |
| Spanning Tree Protocol Instances | 64 |
| Session Count for SPAN | 4 |
| Support for Jumbo Frames | Up to 10,240 Bytes |
| Mean Time Between Failures | 2,416,689 Hours |