RSF Supply is not an authorized distributor. We sell Preowned Surplus and Refurbished products, all warranties are with RSF Supply and not the manufacturer. Firmware or Software is not included.
Overview
- Integrated antennas with flexible radio assignment
- 1024 MB DRAM and 256 MB Flash Memory
- Power draw: 25.8 W (without USB 2.0 port enabled) / 30 W (with USB 2.0 port enabled)
Specs
Model | AIR-AP3802E-B-K9C |
Maker | Cisco |
Operation Mode | Controller Managed |
Compliance Domain | B |
Frequency Bands | Dual-Band |
Compatibility Software | Requires Cisco Unified Wireless Network Software v8.2.111.0 or newer, or Cisco IOS® XE v16.3 or above |
Compatible Controllers | Supports Cisco 2500, 3500 Series Controllers, and Wireless Controller Module for ISR G2 |
Wireless Technology | 4x4 MIMO with 3 spatial streams |
Antenna Configuration | Adjustable Radio for 2.4 or 5 GHz; Dedicated 5 GHz Antenna |
Signal Indicators | LEDs for Boot, Connection, Activity, Warnings, and Errors |
Dimensions | 8.66 x 8.68 x 2.62 inches |
Mass | 4.6 pounds |
Lowest Operational Temperature | -20 °C |
Highest Operational Temperature | 50 °C |
Maximum Altitude for Operation | 9843 feet at 40 °C |
Lowest Storage Temperature | -30 °C |
Highest Storage Temperature | 70 °C |
Operational Humidity Range | 10% to 90% non-condensing |
Memory Capacity | 1024 MB DRAM |
Storage Capacity | 256 MB Flash |
Energy Consumption | 25.8 W (without USB 2.0), 30 W (with USB 2.0) at source |
Deployment Environment | Large Enterprises |
Usage Setting | Indoor |
AIR-AP3802E-B-K9C
Orders typically ship within 1-3 Business days, if you need an item to ship sooner please contact us.
Product Description
The AIR-AP3802E-B-K9C is a controller-based access point supporting 2 bands and equipped with 4 x 4 MIMO technology with three spatial streams for enhanced data transfer rates. It operates on Cisco Unified Wireless Network Software Release 8.2.111.0 or later and Cisco IOS ® XE Software Release 16.3, compatible with Cisco 2500 and 3500 Series Wireless Controllers, among others. Designed for indoor use within large enterprise organizations, this device features 1024 MB DRAM and 256 MB flash memory, with a power draw of 25.8 W (22.5W at the PD) under normal operation, increasing to 30 W (25.5W at the PD) when the USB 2.0 port is enabled.Key Feature for the AIRAP3802EBK9C
- What regulatory domain is associated with this type of controller-based hardware?
The regulatory domain for this hardware is Domain B. - Which Wireless LAN Controllers support the hardware?
Supported Wireless LAN Controllers include the Cisco 2500 Series, Cisco 3500 Series, and Cisco Wireless Controller Module for ISR G2. - How many bands does the hardware operate on?
The hardware operates on 2 bands. - What software is required for this hardware to function?
It requires Cisco Unified Wireless Network Software Release 8.2.111.0 or later, or Cisco IOS ® XE Software Release 16.3. - What are the key features of the technology used in this hardware?
The hardware features 4 x 4 MIMO with three spatial streams and integrated antennas for flexible radio operation in either 2.4 GHz or 5 GHz, alongside a dedicated 5 GHz radio. - What are the physical dimensions and weight of this hardware?
Dimensions are 8.66 x 8.68 x 2.62 inches and it weighs 4.6 lbs. - What is the operating and non-operating temperature range of the hardware?
Operating temperature ranges from -20 °C to 50 °C, while non-operating temperature ranges from -30 °C to 70 °C. - How much RAM and Flash Memory does the hardware have?
The hardware comes with 1024 MB DRAM and 256 MB of Flash Memory. - What is the power draw of the hardware under different conditions?
Power draw is 25.8 W at the PSE (22.5W at the PD) with all features enabled except for the USB 2.0 port, and 30 W at the PSE (25.5W at the PD) with the USB 2.0 port enabled. - Is the hardware designed for indoor or outdoor use, and what is the intended application environment?
The hardware is intended for indoor use in large enterprise organizations.
Product Review
The Cisco AIR-AP3802E-B-K9C access point supports high-density environments with its 4x4 MIMO technology, offering three spatial streams for efficient data transmission. However, its power draw of up to 30W with the USB port enabled may require careful planning in power management for large-scale deployments. Compatible with multiple Cisco Wireless LAN Controllers, it provides flexibility in network design but demands familiarity with Cisco's ecosystem for optimal configuration and management.
Overview
- Integrated antennas with flexible radio assignment
- 1024 MB DRAM and 256 MB Flash Memory
- Power draw: 25.8 W (without USB 2.0 port enabled) / 30 W (with USB 2.0 port enabled)
Specifications
Model | AIR-AP3802E-B-K9C |
Maker | Cisco |
Operation Mode | Controller Managed |
Compliance Domain | B |
Frequency Bands | Dual-Band |
Compatibility Software | Requires Cisco Unified Wireless Network Software v8.2.111.0 or newer, or Cisco IOS® XE v16.3 or above |
Compatible Controllers | Supports Cisco 2500, 3500 Series Controllers, and Wireless Controller Module for ISR G2 |
Wireless Technology | 4x4 MIMO with 3 spatial streams |
Antenna Configuration | Adjustable Radio for 2.4 or 5 GHz; Dedicated 5 GHz Antenna |
Signal Indicators | LEDs for Boot, Connection, Activity, Warnings, and Errors |
Dimensions | 8.66 x 8.68 x 2.62 inches |
Mass | 4.6 pounds |
Lowest Operational Temperature | -20 °C |
Highest Operational Temperature | 50 °C |
Maximum Altitude for Operation | 9843 feet at 40 °C |
Lowest Storage Temperature | -30 °C |
Highest Storage Temperature | 70 °C |
Operational Humidity Range | 10% to 90% non-condensing |
Memory Capacity | 1024 MB DRAM |
Storage Capacity | 256 MB Flash |
Energy Consumption | 25.8 W (without USB 2.0), 30 W (with USB 2.0) at source |
Deployment Environment | Large Enterprises |
Usage Setting | Indoor |