Skip to content
MX-MPC1-3D

RSF Supply is not an authorized distributor. We sell Preowned Surplus and Refurbished products, all warranties are with RSF Supply and not the manufacturer. Firmware or Software is not included.

Overview

The Juniper MX-MPC1-3D is a high-performance network module designed to enhance the capabilities of Juniper MX-Series routers. It is engineered to support a range of applications, including high-density Ethernet services, broadband network gateway functions, and high-volume data center interconnects. With its advanced features and specifications, the MX-MPC1-3D is an ideal choice for service providers and enterprises looking to scale their network infrastructure efficiently. Equipped with one Junos Trio chipset, the MX-MPC1-3D offers increased bandwidth scaling, ensuring smooth and efficient network operations. This module supports LAN-PHY mode at 10.3125 Gbps and WAN-PHY mode at 9.953 Gbps, facilitating flexible network configurations and optimizations according to specific requirements. The chipset's advanced architecture allows for enhanced processing and forwarding capabilities, making it suitable for handling high volumes of data traffic. The MX-MPC1-3D requires 3.4 A at 48 V (165 W) of power, demonstrating its efficient energy consumption relative to its performance output. It weighs 13.8 lb (6.3 kg), making it a manageable component within the networking infrastructure. The module offers two slots for Modular Interface Cards (MICs), labeled PIC 0/1 and PIC 2/3, allowing for customization and expansion of network interfaces. This flexibility supports a wide range of network applications and services, adapting to evolving network demands. Key hardware specifications include: -
  • Expansion Slots: 2x Modular Interface Card slots
  • Throughput: up to 160 Gbps, with speeds ranging from 10 Gbps to 100 Gbps
  • Memory: 64 GB of DDR4 RAM
The MX-MPC1-3D provides a per-slot capacity of 480 Gbps and a total system capacity of 1.92 Tbps, indicating its ability to handle extensive data volumes efficiently. It supports up to 80 1GbE and 80 10GbE interfaces, along with 16 10GbE DWDM and 4 100GbE DWDM interfaces, showcasing its versatility in network connectivity. This module is designed for a 5-rack unit configuration, allowing up to 9 systems per rack, optimizing space within data centers and network facilities. Operating within a humidity range of 5% to 90% and an altitude of up to 10,000 ft (3048 m), the MX-MPC1-3D is built to sustain various environmental conditions, ensuring reliability and continuous operation across different geographical locations. Overall, the Juniper MX-MPC1-3D is a powerful networking module that combines high-performance hardware specifications with flexible interface options. Its incorporation into Juniper MX-Series routers significantly enhances network capacity, scalability, and efficiency, meeting the demands of modern high-speed, high-volume networking environments.

Specs

Part Number MX-MPC1-3D
Manufacturer Juniper
Description MPC1 with traffic management; supports comprehensive L2/L2.5 and basic L3 functionalities
Power Consumption 3.4 A @ 48 V (165 W)
Mass 13.8 lb (6.3 kg)
MIC Slots Two positions for MICs, identified as PIC 0/1 and PIC 2/3
Chipset One Junos Trio chipset for enhanced bandwidth scalability
LAN-PHY Data Rate 10.3125 Gbps
WAN-PHY Data Rate 9.953 Gbps
Modular Slots 2 Modular Interface Card slots
Throughput Capacity Up to 160 Gbps
Data Rate Range 10 Gbps to 100 Gbps
Height in Rack Units 5
Max Units per Rack 9
MPC Slots 2
Capacity per Slot 480 Gbps
Total System Capacity 1.92 Tbps
Minimum Humidity Level 5%
Maximum Humidity Level 90%
Operational Altitude 10,000 ft (3048 m)
Max 1GbE Ports 80
Max 10GbE Ports 80
System Capacity 1.92 Tbps
10GbE DWDM Ports 16
100GbE DWDM Ports 4
Memory 64 GB DDR4 RAM

MX-MPC1-3D

by Juniper
Product Line: Juniper MPCs
Product Type: MPC (Modular Port Concentrator)
$0.00 - $603.00
$603.00
$0.00 - $603.00
$603.00
Title: Used

Orders typically ship within 1-3 Business days, if you need an item to ship sooner please contact us.

Product Description

The MX-MPC1-3D, equipped with one Junos Trio chipset, delivers up to 1.92 Tbps of system capacity and supports LAN-PHY mode at 10.3125 Gbps and WAN-PHY mode at 9.953 Gbps, enhancing bandwidth scaling. It provides two Modular Interface Card slots, facilitating a diverse range of speeds from 10 Gbps to 100 Gbps, and includes full-scale L2/L2.5 with reduced scale L3 features. With a power requirement of 3.4 A @ 48 V (165 W), operating humidity range from 5% to 90%, and an operating altitude up to 10,000 ft, this module is designed for high-capacity networking environments.

Key Feature for the MX-MPC1-3D 

    

  • What is the power requirement of MPC1?
    3.4 A @ 48 V (165 W)
    • 

  • How many Modular Interface Card slots does MPC1 include?
    It includes 2x Modular Interface Card slots.
    • 

  • What is the weight of MPC1?
    13.8 lb (6.3 kg)
    • 

  • What is the maximum operating altitude for MPC1?
    The maximum operating altitude is 10,000 ft (3048 m).
    • 

  • How many slots are available for MICs on MPC1, and how are they labeled?
    Two slots are available for MICs, labeled PIC 0/1 and PIC 2/3.
    • 

  • What are the LAN-PHY and WAN-PHY mode speeds of MPC1?
    LAN-PHY mode operates at 10.3125 Gbps and WAN-PHY mode at 9.953 Gbps.
    • 

  • What chipset does MPC1 utilize, and what advantage does it offer?
    MPC1 utilizes one Junos Trio chipset, which increases scaling for bandwidth.
    • 

  • What is the per slot capacity and system capacity of the device housing MPC1?
    Per slot capacity is 480 Gbps and the system capacity is 1.92 Tbps.
    • 

  • What is the rack unit size and how many systems per rack can be accommodated?
    The rack unit size is 5, with a capacity of 9 systems per rack.
    • 

  • What are the maximum 1GbE and 10GbE capacities of MPC1?
    Maximum capacities are 80 for both 1GbE and 10GbE.
    •

Product Review

The Juniper MX-MPC1-3D offers notable scalability with its system capacity reaching 1.92 Tbps and supporting speeds up to 100 Gbps, facilitated by the Junos Trio chipset which enables significant bandwidth expansion. However, its power requirement of 165 W and a weight of 13.8 lb may pose challenges for energy efficiency and physical handling in densely populated racks. It supports a wide range of Ethernet speeds and has the capability for both LAN-PHY and WAN-PHY modes, but its L3 features are limited, which may restrict its use in complex routing scenarios.

Overview

The Juniper MX-MPC1-3D is a high-performance network module designed to enhance the capabilities of Juniper MX-Series routers. It is engineered to support a range of applications, including high-density Ethernet services, broadband network gateway functions, and high-volume data center interconnects. With its advanced features and specifications, the MX-MPC1-3D is an ideal choice for service providers and enterprises looking to scale their network infrastructure efficiently. Equipped with one Junos Trio chipset, the MX-MPC1-3D offers increased bandwidth scaling, ensuring smooth and efficient network operations. This module supports LAN-PHY mode at 10.3125 Gbps and WAN-PHY mode at 9.953 Gbps, facilitating flexible network configurations and optimizations according to specific requirements. The chipset's advanced architecture allows for enhanced processing and forwarding capabilities, making it suitable for handling high volumes of data traffic. The MX-MPC1-3D requires 3.4 A at 48 V (165 W) of power, demonstrating its efficient energy consumption relative to its performance output. It weighs 13.8 lb (6.3 kg), making it a manageable component within the networking infrastructure. The module offers two slots for Modular Interface Cards (MICs), labeled PIC 0/1 and PIC 2/3, allowing for customization and expansion of network interfaces. This flexibility supports a wide range of network applications and services, adapting to evolving network demands. Key hardware specifications include: -
  • Expansion Slots: 2x Modular Interface Card slots
  • Throughput: up to 160 Gbps, with speeds ranging from 10 Gbps to 100 Gbps
  • Memory: 64 GB of DDR4 RAM
The MX-MPC1-3D provides a per-slot capacity of 480 Gbps and a total system capacity of 1.92 Tbps, indicating its ability to handle extensive data volumes efficiently. It supports up to 80 1GbE and 80 10GbE interfaces, along with 16 10GbE DWDM and 4 100GbE DWDM interfaces, showcasing its versatility in network connectivity. This module is designed for a 5-rack unit configuration, allowing up to 9 systems per rack, optimizing space within data centers and network facilities. Operating within a humidity range of 5% to 90% and an altitude of up to 10,000 ft (3048 m), the MX-MPC1-3D is built to sustain various environmental conditions, ensuring reliability and continuous operation across different geographical locations. Overall, the Juniper MX-MPC1-3D is a powerful networking module that combines high-performance hardware specifications with flexible interface options. Its incorporation into Juniper MX-Series routers significantly enhances network capacity, scalability, and efficiency, meeting the demands of modern high-speed, high-volume networking environments.

Specifications

Part Number MX-MPC1-3D
Manufacturer Juniper
Description MPC1 with traffic management; supports comprehensive L2/L2.5 and basic L3 functionalities
Power Consumption 3.4 A @ 48 V (165 W)
Mass 13.8 lb (6.3 kg)
MIC Slots Two positions for MICs, identified as PIC 0/1 and PIC 2/3
Chipset One Junos Trio chipset for enhanced bandwidth scalability
LAN-PHY Data Rate 10.3125 Gbps
WAN-PHY Data Rate 9.953 Gbps
Modular Slots 2 Modular Interface Card slots
Throughput Capacity Up to 160 Gbps
Data Rate Range 10 Gbps to 100 Gbps
Height in Rack Units 5
Max Units per Rack 9
MPC Slots 2
Capacity per Slot 480 Gbps
Total System Capacity 1.92 Tbps
Minimum Humidity Level 5%
Maximum Humidity Level 90%
Operational Altitude 10,000 ft (3048 m)
Max 1GbE Ports 80
Max 10GbE Ports 80
System Capacity 1.92 Tbps
10GbE DWDM Ports 16
100GbE DWDM Ports 4
Memory 64 GB DDR4 RAM

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare